• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.271-279
• /
• 2007

Ship structures are basically an assembly of plate elements and estimation load-carrying capacity or the ultimate strength is one of the most important criterion for estimated safety assessment and rational design on the ship structure. Also, Structural elements making up ship plated structures do not work separately against external load. One of the critical collapse events of a ship structure is the occurrence of overall buckling and plastic collapse of deck or bottom structure subjected to longitudinal bending. So, the deck and the bottom plates are reinforced by a number af longitudinal stiffeners to increase their strength and load-carrying capacity. For a rational design avoiding such a sudden collapse, it is very important to know the buckling and plastic behaviour or collapse pattern of the stiffened plate under axial compression. In this present study, to investigate effect af modeling range, the finite element method are used and their results are compared varying the analysis ranges. When making the FEA model, six types of structural modeling are adopted varying the cross section of stiffener. In the present paper, a series of FEM elastoplastic large deflection analyses is performed on a stiffened plate with fiat-bar, angle-bar and tee-bar stiffeners. When the applied axial loading, the influences of cross-sectional geometries on collapse behaviour are discussed. The purpose of the present study is examined to numerically calculate the characteristics of buckling and ultimate strength behavior according to the analysis method of ship's stiffened plate subject to axial loading.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.71-78
• /
• 2015

The reliable sloshing assessment methods for LNG CCS(cargo containment system) are important to satisfy the structural strength of the systems. Multiphase fluid flow of LNG and Gas Compressibility may have a large effect on excited pressures and structural response. Impinging jet model has been introduced to simulate the impact of the LNG sloshing and analyze structural response of LNG CCS as a practical FSI(fluid structure interaction) method. The practical method based on fluid structure interaction analysis is employed in order to evaluate the structural strength in actual scale for Mark III CCS. The numerical model is based on an Euler model that employs the CVFEM(control volume based finite element method). It includes the particle motion of gas to simulate not only the interphase interaction between LNG liquid and gas and the impact load on the LNG insulation box. The analysis results by proposed method are evaluated and discussed for an effectiveness of FSI analysis method.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.219-224
• /
• 2013

In the case of occurring marine oil pollution, it is the most effective way that to prepare all the necessary response resources in advance and to respond to incidents, but there are limits in reality. Therefore, may be an important alternative ways to use a fishing vessel registered in the affected area by massive marine oil pollution efficiently. In the United States and other developed countries, it is can be found that temporary response program by local fishing vessels(VOO program) has been developed and operated. This study was examined for sweeping arm system suitable for domestic small fishing vessels. The selected small vessel was as the model of Coastal gill-net and compound fishing vessel with classes of 2.5~3.5tons, length 8~9m, breath 2.5~2.8m, horsepower 200~250 HP and FRP materials. The developed equipment was designed that can be easily mounted on the model ship and portable structure. For increasing the field practicality, the weight of each part was composed less than 10kg for easy assembly and disassembly.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.139-145
• /
• 2002

The flow zone through propeller jets are used in evaluating the environmental and constructional effects of navigation on the waterway. It relies on the characteristics of ships and water depth. A numerical model using the momentum theory of the propeller and Shield's diagram was developed in a restricted waterway. Equations for discharge are presented based on thrust coefficients and propeller speed and are the most accurate means of defining discharge. Approximate methods for discharge are developed based on applied ship's power. Equations for discharge are as a function of applied power, propeller diameter, and ship speed. Water depth of the waterway and draft of the shop are also necessary for the calculation of the grain size of the initial motion. The velocity distribution of discharge from the propeller was simulated by the Gaussian normal distribution function. The shear velocity and shear stress were from the Sternberg's formula. Case studies to show the influence of significant factors on sediment movement induced by the ship's propeller at the channel bottom are presented.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.61-71
• /
• 1999

This paper resents a novel cargo system adapted for a sea port subjected to severe time-varying tide. The proposed system can perform loading or unloading by using a sort of hydraulic elevator associated with real-tim position control. As a preliminary phase, a small-sized model of the cargo system is designed and constructed. The model consists of three principal components ; container palette transfer(CPT) car, platform with lifting columns and cargo ship. The platform activated by the electro-rheological(ER) valve-cylinder is actively controlled to track the position of the cargo ship subjected to be varied due to the time-varying tide and wave motion. Following the derivation of the dynamic model for the platform and cargo ship motions, an appropriate control scheme incorporating time sequence and PID(proportional-integral-derivative) controller is formulated and implemented. Both the simulated and the measured control results are presented to demonstrate the effectiveness of the proposed cargo system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.6
• /
• pp.351-356
• /
• 2022

In this paper, we present the regression analysis and design optimization for improving the permeability of 3D woven materials based on numerical analysis data. First, the parametric analysis model is generated with variables that define the gap sizes between each directional wire of the woven material. Then, material properties such as bulk modulus, thermal conductivity coefficient, and permeability are calculated using numerical analysis, and these material data are used in the polynomial-based regression analysis. The Pareto optimal solution is obtained between bulk modulus and permeability by using multi-objective optimization and shows their trade-off relation. In addition, gradient-based design optimization is applied to maximize the fluid permeability for 3D woven materials, and the optimal designs are obtained according to the various minimum bulk modulus constraints. Finally, the optimal solutions from regression equations are verified to demonstrate the accuracy of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.351-359
• /
• 2010

In this paper, we propose a transmission algorithm of the TLI protocol of the IEC 61162-4 standard to perform the e-Navigation on ship, and we design and implement the TLI protocol according to the proposed algorithm. The implemented protocol is a TCP/IP based protocol, and is a network protocol with the MAU and LNA components proposed in the IEC 61162-4 standard. In addition, it makes a data transmission over the network architecture based on client/server network model. In the implemented protocol, there are a communication between the MAU and the LNA in one host, and also a communication between the LNA and the LNA in each other hosts. In order to provide a variety of service in a host, every client host has a LNA and multiple MAUs. According to the standard specification and the proposed transmission algorithm, we designed and implemented the TLI protocol using object-oriented mechanism. We carried out the experiment under a simple network model similar to real ship environment, and confirmed that it successfully transmits and receives data between the hosts.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.121-127
• /
• 2003

The Korea Maritime Police Agency(KMPA) is the national maritime Search and Rescuee (SAR) authority with the responsibility to promote an efficient organization of SAR services and to coordinate the conduct of SAR operations within the Korean Search and Rescue Region(SRR). The maritime SAR operations shall provide an adequate and effective search and rescue services to minimize the loss by rendering aid to persons in distress and property in the marine environment. The essence of a successful search and rescue operation is the speed with which it is planned and carried out because survivors who need assistance and whose chances of survival diminish rapidly with time. This paper aims to propose an optimal allocation model of maritime SAR fleet in view of minimizing the search and rescue time. When maritime accidents occur, rescue units have to reach to the distress scene within the specified time. For this, SAR units must be redeployed to an advanced base so that Rescue Units(RU) can reach to the scene of distress in the shortest possible time. The Korean maritime SRR is divided into 180 sub-areas in consideration of an operational and technical ability of SAR units. The suggested model is verified through an empirical application to the Korean maritime SRR. And also the Rescue Vessels(RV) required is estimated for each Rescue Co-ordination Center(RCC).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.35-41
• /
• 2003

The Korea Maritime Police Agency(KMPA) is the national maritime Search and Rescue (SAR) authority with the responsibility to promote an efficient organization of SAR services and to coordinate the conduct of SAR operations within the Korean Search and Rescue Region(SRR). The maritime SAR operations shall provide an adequate and effective search and rescue services to minimize the loss of life, injury property damage or loss by rendering aid to persons in distress and property in the marine environment. The essence of a successful search and rescue operation is the speed with which it is planned and carried out because survivors who need assistance and whose chances of survival diminish rapidly with time. This paper aims to propose an optimal allocation model of maritime SAR fleet in view of minimizing the search and rescue time. When maritime accidents occur, rescue units have to reach to the distress scene within the specified time. For this. SAR units must be redeployed to an advanced base so that Rescue Units(RU) can reach to the scene of distress in the shortest possible time. The Korean maritime SRR is divided into 180 sub-areas in consideration of an operational and technical ability of SAR units The suggested model is verified through an empirical application to the Korean maritime SRR. And also the Rescue Vessels(RV) required is estimated for each Rescue Co-ordination Center(RCC).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.535-541
• /
• 2008

As the concurrent engineering concept has emerged along with the support of optimization techniques, lots of endeavors have been made to apply optimization techniques to actual design problems for a holistic decision. Even if the range of design problems which the optimization is applicable to has been extended, most of ship designs still remain in an iterative approach due to the difficulties of seamless integration of all related design activities. In this approach, an entire design problem is divided into many sub-problems and carried out by many different disciplines through complicated internal interactions. This paper focuses on preliminary ship design process. This paper proposes a process centric integrated framework as the first step to establish a workflow based design process management system. The framework consists of two parts; a schedule management part to support a manager to monitor current progress status and adjust current schedule, and a process management part to assist a design to effectively perform a series of design activities by following a predefined procedure. Overall system are decomposed into modules according to the target to be managed in each module. Appropriate interactions between the decomposed modules are designed to achieve a consistency of the entire system. Design process model is also designed on a thorough analysis of actual ship design practice. The proposed framework will be embodied using a commercial workflow package.