• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.41-47
• /
• 2013

This letter describes a dual-band compact monopole antenna with two branches for Wi-Fi applications. The proposed antenna is based on a planar monopole design, and composed of two branches of radiating patches for dual-band operation. The ground size of the antenna matches the ground size of a typical hand-held cellular phone for improved compatibility with mobile phone printed circuit boards. The antenna is designed using a simulator and fabricated with optimized parameters. The fabricated antenna is measured at the lower and higher operating frequencies, and the return loss coefficient, gain, and radiation patterns are determined.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.12
• /
• pp.559-565
• /
• 2002

Today, because a quality factor of the inductor fabricated on silicon substrate for RFIC is under 12, the realization of inductor haying high-Q is essential. In this paper, two inductors having improved Q-factor are proposed and fabricated using a bondwire on silicon substrate. Also for the PGS is applied to the same inductors, four inductors are fabricated finally The bondwire Inductors have the relatively low conductor loss due to wide cross-section area and they can reduce the parastic capacitance very much because they are located in the air. Simulation and measurement results show that the proposed inductors have much more improved Q-factor, 15, than a conventional spiral inductor at 1.5 GHz. Because of the use of an automatic bonding machine, we can fabricate the high - Q inductors very easily, repeatedly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.129-134
• /
• 2009

In this paper, we proposed a miniaturized Balun-BPF structure using semi-lumped line The conventional Ring Balun-BPF relatively has a big size structure because they consist of two ring resonators, wide line width ring-resonators for low loss and $\lambda/4$transmission line inverters. The ring resonators are miniaturized to 1/4 size by semi-lumped line and we added triangle patches in the ring resonator for compact Balun-BPF structure. The fabricated Balun-BPF is miniaturized to 1/4 size and contains symmetrical output characteristics of balance ports.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.155-158
• /
• 2010

태양광전원이 연계되어 운용되고 있는 저압배전선로에 Sag, Swell 발생에 따른 태양광전원의 불안정한 운전과 태양광전원의 높은 왜형율의 Harmonic 발생에 따른 배전계통의 보호계전기(OCGR) 동작 등 전력 품질에 있어서 문제점이 발생되고 있다. 이러한 문제점은 사회적, 경제적 손실을 초래하게 되어, 전력품질(Sag, Swell, Harmonic, 모터기동)특성해석이 중요하다. 따라서 본 논문에서는 태양광전원이 연계되어 정상 운용 중인 배전계통에 대한 전력품질특성시험을 수행하기 위하여, 모의 배전계통장치와 모의 태양광전원장치, Labview용 감시제어장치로 구성한 태양광전원용 전력품질시험장치를 제작하였다. 이 시험장치를 이용하여 태양광전원 연계 시 Sag, Swell, Harmonic, 모터기동에 대한 시험을 수행하여 태양광전원이 배전계통에 미치는 영향과 특성을 분석하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1001-1005
• /
• 2002

In march 2002, Study Group on Long-Run Incremental Cost(LRIC) Model of Japan compiled its report. In this report shows there are three ways of inter-islands and island to land telecommunication service, radio communication, suboptic, communication satellite. Analysis of Japanese island network model is helpful in developing Korean island network model. The development of Korean island network model will make he useful costing of local loop unbundling, universal service fund and access charge.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.1117-1120
• /
• 2003

DWDM(DensedWavelengthDivisionMultiplexing)은 광 파이버를 이용하여 기존의 통신보다 높은 대역폭(B/W)을 얻기 위한 기술로 여러 신호를 각각 다른 파장으로 변조해 하나의 Fiber 를 통해 전송하는 방식이며, 기본적으로 EDFA(Erbium Doped Fiber Amplifier), AWG(Arrayed Wave guide Grating), OADM(Optical Add/Drop Multiplexer) 등의 주요 부품과 여러 광 관련 부품들로 구성돼 있으며, 다수의 파장을 MUX(AWG)에서 다중화하고, 장거리 전송을 위해 OA(EDFA)에서 광신호를 증폭하게 된다 그리고 일부 특정 파장만 Add/Drop하기 위해 OADM이 놓이게 되며, 또한 선로(광섬유)의 손실을 보상하기 위해 필요한 구간에 리피터(EDFA)를 두어 광신호를 증폭 송신하며 수신단에서는 들어오는 여러 파장을 OA(EDFA)를 통해 증폭한 후 DEMUX(AWG)에서 역 다중화해 수신하게 된다. 이와 같은 DWDM방식을 이용한 Network는 Star, Mesh, Ring 등의 다양한 형태로 구성될 수 있으며, 초기에는 Point-to-Point 방식의 장거리 전송에 주로 사용돼 왔으나 Metro 구간의 Traffic 이 급격히 증가하면서 Metro- DWDM Network 이 부각되고 있어 본 논문에서는 현재 SK Telecom에서 상용화되고 있는 1,600G DWDM과 Metro-DWDM간의 망 구축의 최적화 방안을 연구해 본다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.439-444
• /
• 2020

In this paper, the analysis of the FSCS (frequency-selected coupling structure) as the coupling coefficient and multi-stage FSCS for enhanced bandstop bandwidth is suggested. The FSCS is composed by the connected coupled-line and open-stub. Basically, the resonance frequency of the FSCS is given by the electrical length of the stub, and the bandwidth is controlled by the coupling coefficient. Multi-stage FSCS is made by addition of another FSCS with the half electrical length. Manufactured bandstop filter using 3 stage FSCS is measured with the stopband of 177.3% and the maximum return loss of 1dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1217-1219
• /
• 2003

상용화되어 있는 이동통신 기기의 Front-end 부분은 듀플렉서와 필터를 포함하는 수동소자로 구성되어 있다. 듀플렉서의 임피던스 정합선로는 전송선로 이론으로부터 설계하며, 단순하게 ${\lambda}=1/4$ 파장 길이의 정합 선로를 설치하는 것이기 때문에 정합선로를 이용한 듀플렉서 성능을 극대화하기 위한 설계의 융통성이 없는게 현실이다. 이런 문제점을 해결하기 위하여 집중소자(lumped element)인 R L C를 탄성 표면파 듀플렉서 대신 스위치 모들에 적용하게 된다면 여러 가지 다양한 형태의 회로를 구현할 수 있고 회로망 내에 위치하는 집중소자의 정격을 최적화하여 스위치 모듈의 성능을 향상시킬 수 있는 가능성이 있다. 본 연구에서는 $900 MHz{\sim}2.2 GHz$의 대역에서 소형화 집적화에 적용 가능한 디바이스를 개발하기 위하여 고주파, 저진압, 저손실 스위치 모듈의 제조와 구성되는 커패시터와 인덕터의 제조와 특성에 관하여 연구하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.257-262
• /
• 2008

In this paper, the key parameters of $CO_2$ laser(focus depth, air blow rate, total laser beam time, number of pulse) are experimented for thru-hole and scribing line on AIN(aluminum nitride) substrate with high thermal conductivity. And, microstrip line & spiral planar inductor are fabricated on AIN substrate using 5 um Cu-plating with self-masking technique. The microstrip line of AIN has 0.1 dB/mm attenuation at 10 GHz and 6 nH spiral planar inductor has 56 maximum quality factor at 1 GHz. Thus, the AIN substrate is promising for GHz applications of high power area.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.540-546
• /
• 2010

In this study, using a coplanar waveguide employing Periodic Strip Structure (PSS), highly miniaturized on-chip wilkinson power divider was realized on Si radio frequency integrated circuit (RFIC). The wilkinson power divider exhibited good RF performances from 25 to 50 GHz, and its size was $0.44{\times}0.1mm^2$, which is 4.8 % of conventional one. We also investigated the RF performances of various structures employing PSS.