• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.31-43
• /
• 1993

본 연구에서는 힁부재가 없는 AFRAMAX급 신구조 방식의 유조선을 개발하고자 하였다. 설계의 기본 개념은 1) 이중선체구조를 채용하여 해난사고 발생시 기름유출 방지를 피하고, 2) 힁부재가 없는 극히 단순한 선체구조를 채용하여 용접 로봇등을 활용한 자동건조 비율을 높임으로써 건조 생산성을 향상시키는데 주안점을 두고 있다. 설계 결과 얻어진 선체구조는 기존의 유조선 구 조와 매우 상이하다. 초기구조설계단계에서 구조 부재의 치수는 기존의 선급설계 지침을 활용 하여 결정하였으나, 기존의 유조선 구조와 비교하여 구조배치가 크게 바뀌어 졌기 때문에 기존의 선급설계지침을 만족했다고 해서 구성부재와 국부구조뿐만 아니라 구조 전체적으로도 충분한 구조안전성을 가지고 있는지는 확실치 않다. 따라서 직접구조해석에 의한 구조안전성 평가가 필수적으로 요구되며, 이를 위해 저자들은 선체구조의 최종 종강도(ultimate longitudinal strength), 최종 힁강도(ultimate transverse strength) 및 최종 국부강도(ultimate local strength )를 기준으로한 구조안전성 평가를 수행하였다. 본 논문에서는 이들 중에서 국부 구조부재에 대한 안전성평가 문제만을 다루었다. 결론적으로, 본 연구에서 개발한 선체구조는 건전상태(intact condition)하에서 뿐만 아니라 손상상태하에서도 구조부재는 좌굴 또는 붕괴하지 않고 전반적 으로 충분한 구조안전성을 가지고 있다는 결론을 내릴 수 있었다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.338-339
• /
• 2011

본 연구는 해양플랜트 지원선 중 작업자들에게 전용거주시설을 제공하는 생활바지선 거주구공간계획에 관한 연구이다. 생활바지선의 거주구는 '작업자영역', '서비스영역', '승무원영역', '업무영역'으로 공간을 분류할 수 있다. 본 연구에서는 현재 사용되고 있는 10척의 생활바지선 일반배치도(GA)를 조사하여 거주공간특성을 분석하였다. 또한 해양플랜트 거주구 설계시 가장 많이 참조되는 ABS, NORSOK 등 해외선급협회에서 제시하는 해양플랜트 거주구 공간설계지침을 분석하여 생활바지선에서 거주구 공간계획에 적용하기위한 설계지침을 제시하였다. 그리고 생활바지선 거주구 설계모델을 설정하고 모델을 대상으로 데크별 공간배치와 동선을 계획하였다. 마지막으로 거주구 설계모델의 객실, 식당, 주방, 휴게공간 그리고 위생시설 등 주요공간을 대상으로 공간계획을 실시하고 계획안을 제시하였다. 최근 국내 조선업계에서도 생활바지선에 대한 관심이 증가하고 있으나 거주구 공간설계기술의 부족으로 외국 설계업체에 의존하고 있는 형편이다. 따라서 우선 한국선급협회에서 본 연구결과를 기초 생활바지선 거주구 공간계획을 위한 설계지침을 시급히 만들어야만 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.258-260
• /
• 2023

목포해양대학교와 삼성중공업은 2021년 공동 연구를 통하여 '실습선 기반 원격/자율 운항 선박 시스템 개발 및 검증'을 수행하였고 이를 통하여 목포해양대학교 실습선인 세계로호를 활용하여 삼성중공업의 자율운항 선박 시스템(Autonomous Navigation System)인 SAS의 Test Bed 시연 실험 시스템을 구축하여 2022년 자율운항 선박(MASS) 기술 요소에 대한 시뮬레이션 기반 SAS(Samsung Autonomous Ship) System 검증 및 '운항 노선에 대한 설정을 통한 선박 자율운항 검증'을 위한 실선·실해역 실험을 통해 이를 시연 및 검증을 시행하였다. 특히 의미 있는 것은 자율운항선박 실선 테스트 과정 중 발생할 수 있는 모든 위험요소 분석을 위해 한국선급과 HAZID Workship을 실시하였고, 이를 통해 국내최초 자율운항실험용 기국 승인 및 선급임시검사 완료 후 실험이 진행되었다는 것이다. 이 연구에서는 실습선 기반 자율운항 선박 실해역 실험 연구를 소개하고 그 결과를 운항자 입장에서 분석하여 향후 보완하여야 할 사항을 제시하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.4
• /
• pp.278-288
• /
• 2024

According to International Association of Classification Societies (IACS) Unified Requirement (UR) E26, ships contracted for construction after July 1, 2024 should be designed, constructed, commissioned and operated taking into account of cyber security. In particular, ship network monitoring tools should be installed in accordance with requirement 4.3.1 in IACS UR E26. In this paper, we propose a Security Information and Event Management (SIEM) security policy model for ships as an effective threat detection method by analyzing the cyber security regulations and ship network status in the maritime domain. For this purpose, we derived the items managed in the SIEM from the maritime cyber security regulations such as those of International Maritime Organization (IMO) and IACS, and defined 14 detection policies considering the status of the ship network. We also presents the detection policy for non-expert crews to understand it, and occurrence conditions depending on the ship's network environment to minimize indiscriminate alarms. We expect that the results of this study will help improve the efficiency of ship SIEM to be installed in the future.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.12
• /
• pp.1166-1176
• /
• 2011

The prospect in opening the arctic trade transportation route on a year-round basis offers vast opportunity of exploring untapped resources and shortened navigational routes. In addition, the environment's remoteness and lack of technical experiences remains a big challenge for the maritime industry. With this, engine designers and makers are continually investigating, specifically optimizing propulsion shafting system design, to meet the environmental and technical challenges of the region. The International Association of Classification Society, specifically machinery requirements for polar class ships(IACS UR13), embodies the propulsion shafting design requirements for ice class vessels. However, the necessity to upgrade the various features of the unified rules in meeting current polar requirements is acknowledged by IACS and other classification societies. For the polar class propulsion shafting system, it is perceived that the main source of excitation will be the propeller - ice load interaction. The milling - and the impact load, in addition to the load cases interpreted by IACS, contribute greatly to the overall characteristic of the system and due considerations are given during the propulsion design stage. This paper will expound on the excitation load estimation factors affecting the dynamic response of the different propulsion shafting system design. It is anticipated that detailed understanding of these factors will have a significant role during propulsion shafting design in the future.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.165-172
• /
• 2015

The class of Dynamic Positioning System is divided in 3 classes depending on its redundancy and reliability according to IMO and classification society. There are 3 DP classes such as DP Class 1, 2 and 3 according to IMO MSC/Circ. 645. Higher DP class vessel has higher reliability, since redundancy concept is applied to the DP vessel depending on its DP class and can operate more safely. There are not enough information about DP class notation, which are needed when a company builds a new or buys second hand DP vessel or modifies DP classes, even the Korean shipyard is building a lot of DP vessels now. Also, the practical case of DP vessel modification, which had been done in Korea, to meet DP notation of IMO and classification society, will be helpful for DP vessel modification and sales industry development in Korea as a new business. As such this research identified what kind of requirements need to be taken into account to be from DP class 1 to DP class 2. The real DP class modification case is used to identify the requirements of DP class upgrade. Through the FMEA the redundancy concept on power system, thruster system and DP control system need to apply for DP class upgrade. The power system have to keep its DP function even if just a single fault happens on the generator or switchboard. Also, the PMS is required to monitor and control power system. Ship's Surge, Sway and Yaw movements can be controlled by the remaining thruster system after a single thruster fails. Lastly, multiple installation of PRS, sensors and DP control system are required to keep DP ability after a single fault on the DP control systems.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.617-625
• /
• 2013

"Sale and purchase brokers" are independent contractors who act as agents for principals intending to seller or buy ships in English Maritime Law. The essential feature is that legal position of shipbroker is largely one of agency. They can be obtained by a study of the Lloyd's Register or the equivalent registers of other Classification Societies, the American Bureau of Shipping and Korean Registers. Such a broker is of valuable assistance to the prospective seller or purchaser. And the broker's liability normally arises in the context of a contract. But, expressed in general terms, those contractual obligations are, in absence of contrary agreement, to act with reasonable care and skilled to obtain the cover requested by his client not to guarantee that such will be concluded and to ensure that the scope of the policy, its essential terms and relevant exclusions are made known to the insured. Acting in this professional capacity, the broker's liability are such that the facts upon which an action for breach of contract may be based may also found an action for the trot of negligence provided that there is shown to be the necessary 'assumption of responsibility' by the broker conveyed directly or indirectly to the insured. This thesis deals with liability of S&P Brokers, the legal problems of ship broking, commission, conflicts of interest and secret commissions in English Maritime Law and the Cases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.270-276
• /
• 2019

According to the International Maritime Organization (IMO) 2020 Regulation, ships operating outside designated emission control areas (ECA) have to use low-sulfur oil with a sulfur content of 0.5% or less by January 2020. To minimize the consumption of high-priced low-sulfur oil, it is urgent to introduce efficient energy-saving devices (ESD), and contra-rotating propeller (CRP) systems are well known to be the most effective one. The shafting system that drives a CRP is composed of an inner shaft and an outer one and has a mutually influential system that is much more complex and heavier than a general shafting system. An initial design was carried out to install a CRP system for the first time in Korea. The purpose of this study is to verify whether the journal bearing meets the classification's design criteria through a bearing reaction force analysis for the classification's approval of the initial design. It is ideal for the thrust of the propeller to act on the center of the shaft, but thrust eccentricity occurs due to the uneven wake caused by the stern shape. Load conditions were applied while considering thrust eccentricity to perform the shaft analysis, and the results were compared with the classification's criteria.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.230-231
• /
• 2019

This study is a development on condition based maintenance(CBM) technology which is a core item of future autonomous ships. It is developing to design & installation of condition monitoring system and acquisition & processing of data from ongoing ships for fault prediction & prognosis of engine in operation. The ultimate goal of this study is to develop a predicts and decision support software for marine engine faults. To do this, the FMEA and fault tree analysis of the main engine should be accompanied by the analysis of classification of system, identification of the components, the type of faults, and the cause and phenomenon of the failure. Finally, the CBM system solution software could predict and diagnose the failure of main engine through integrated analysis for bid-data of ongoing ships and engineering knowledge. Through this study, it is possible to pro-actively cope with abnormal signals of engine and to manage efficiently, and as a result, expected that marine accident and ship operation loss during navigation will be prevented in advance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.230-237
• /
• 2023

Due to the COVID-19 pandemic and climate change, shortages of essential commodities and resources continue to occur globally. To address this problem, trade volume demand suddenly increased, driving up the freight rate of container ships sharply. The size of container vessels progressively increased from 1,500 TEU (twenty-foot equivalent unit) in the 1960s to 24,400 TEU in 2021. As the improvement of container loading capacity is closely related to the enlargement of the lashing bridge structure, it is necessary to design a structure effective for good container securing and safe under the various external loads that occur during voyage. Major classification societies have recently issued structural-analysis-based guidelines to evaluate the structural safety of lashing bridges, but their acceptance criteria and evaluation methods are different, causing confusion among engineers during design. In this study, the strength change characteristics are summarized by variations in the main variables (modeling range, opening consideration, mesh size) likely to affect the results. Based on this result, the authors propose a reasonable structural-analysis-based evaluation that is expected to serve as a reference in the next revision of classification standards.