• Magazine of RCR
• /
• v.13 no.3
• /
• pp.32-38
• /
• 2018

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.305-312
• /
• 2017

This paper presents a laboratory investigation into the effects of fillers using industrial by-product such as coal ash, IGCC slag on properties of hot-mixed asphalt concrete variation with filler content. For comparison, existing mixture with lime and dust have also been considered. Marshall and flow test has been considered for the purpose of mix design as well as evaluation of mixture. Other performance tests such as indirect tensile strength test, tensile strength ratio(moisture susceptibility), dynamic stability have also been carried out variation with filler content. It is observed that the mixes with industrial by-product exhibit conform with quality standard. Therefore, it has been recommended to utilize industrial by-product based on fly ash wherever available, not only reducing the produce cost but also partly solve the industrial by-product utilization and disposal problem.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2017

This study was carried out to physicochemical properties and free CaO contents of coal ash in domestic circulating fludized bed combustion power plant using ethylene glycol method. Results of physicochemical properties, there are many differences in CaO contents for the region position in CFBC plant. The reason, It is considered to be reflected that regulation of exhaust concentration for oxides of sulfur and other operation characteristics of region position in CFBC plant. Free CaO contents are 1.96 ~ 10.78% of fly ash and 0.07~4.24 % of bottom ash, fly ash is higher than in the bottom ash. besides CaO contents of raw materials, particle distribution have a lot of influence Free CaO contents.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.514-519
• /
• 2020

In this study, cement clinkers were sintered at each temperature by replacing some of the clay components of cement clinkers with coal materials. The mineral phase change of sintered cement clinker was quantitatively analyzed by XRD-Rietveld method. As the sintering temperature of cement clinker increased, the amount of belite decreased, the amount of alite increased, and the amount of free-CaO decreased. The form of alite and belite could be distinguished at sintering temperature of 1450℃ or higher. The crystal size was greatly increased at 1500℃ sintering. It was confirmed that the excessive sintering was progressed. Free-CaO decreased with the increase of sintering temperature. At 1450 ℃ or higher, it was less than 0.5%. In 1450℃ or greater, it is determined that enough sintering is included. Therefore, the application of fly ash as a raw material of cement clinker was judged to be usable as a source of chemical components of alumina and iron raw materials.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.553-560
• /
• 2021

In this study, cement clinker using a pure sample and clinker using 7% coal ash were sintered at a temperature of 1050~1500℃. Changes in the content of cement minerals and changes in microstructure by sintering temperature were reviewed. The application of coal ash as a raw material for cement clinker was applicable as a source of Al₂O₃ and SiO₂. At a sintering temperature of 1350℃ or higher, the cement clinker applied with coal ash showed the same level of mineral content as compared to the cement clinker applied with pure raw material. The microstructure also showed a similar state, confirming that coal ash can be used as a raw material for cement. In XRD-Reitveld analysis, a maximum amount of Belite was produced at 1250℃. The conversion from Belite to Alite was observed from 1350℃. From 1350℃, the interstitial phase and the mineral phase presumed to be alite were distinguished. It was clearly distinguished from 1400℃. As the sintering temperature increased, the shape and boundary of the crystal phase became clear, and the size of the crystal phase was also increased.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.60-67
• /
• 2021

This study presented techno-economic analysis of a 500 MWe oxy-coal power plant with CO2 capture. The power plant included a circulating fluidized-bed (CFB), ultra-supercritical steam turbine, flue gas conditioning (FGC), air separation unit (ASU), and CO2 processing unit (CPU). The dry flue gas recirculation (FGR) was used to control the combustion temperature of CFB. One FGR heat exchanger, one heat exchanger for N2 stream exiting ASU, and a heat recovery from CPU compressor were considered to enhance heat efficiency. The decrease in the temperature difference (ΔT) of the FGR heat exchanger that means the increase in heat recovery from flue gas enhanced the electricity and exergy efficiencies. The annual cost including the FGR heat exchanger and FGC cooling water was minimized at ΔT = 10 ℃, where the electricity efficiency, total capital cost, total production cost, and return on investment were 39%, 1371 M$, 90 M$, and 7%/y, respectively.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.31-34
• /
• 1999

기-고체간의 접촉효율이 높고, 층 내 전체에 걸쳐서 균일한 기-고의 접촉을 갖는 등 많은 장점이 있어 석탄연소로, 촉매반응기와 같은 여러 기-고 반응기에 적용이 확대되고 있는 순환유동층은 높은 유속에서 조업되므로 상승관내 고체입자들은 즉시 비산하게 된다. 따라서, 원활한 반응에 필요한 상승관내 적절한 고체체류량 유지를 위해 고체입자들 대부분은 싸이클론에서 포집 되어 고체재순환부에 의하여 상승관내로 재주입 된다.(중략)

• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.331-337
• /
• 1995

석탄가스화 복합발전 시스템은 고효율 및 우수한 환경보전성으로 인하여 차세대 화력발전 시스템으로 각광받고 있다. 본 연구는 석탄가스화기내의 비반응 유동장에 대한 연구로서, 순수유동장 및 미분탄입자를 포함한 이상유동장에 대한 전산해석을 수행하였다. 가스화기내의 유동장을 기술하는 Navier-Stokes방정식을 유한차분법에 의하여 해석하고 그 결과를 나타내었다. 특히 선회유동의 영향에 의한 미분탄입자의 거동 및 재순환영역의 특성에 대하여 선회강도의 함수로 고찰하였다. 해석결과에 의하면 가스화기내에서는 며책의 재순환영역이 형성됨을 알 수 있었다. 비반응유동장의 해석결과이지만, 선회유동은 화염안정화에 긍정적인 영향을 줄 수 있을 것으로 추측되는 결과를 보였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.156-157
• /
• 2014

Inorganic binding material was made by recycled resource and its applicability as pile-filling material was examined. The result was that the material had same liquidity with the liquidity of OPC and high reactivity with site soil. According to dynamic/static loading tests by site test-construction, the inorganic binding material met both design bearing capacity and settlement. Since the inorganic binding material showed same or better performance than OPC, the utilization possibility of the inorganic binding material made of recycled resource as pile-filling material was verified.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.58-67
• /
• 1997

In this study numerical computations were performed to predict reacting flow fields of gasification processes of pulverized subbituminous coal in a cylindrical coal gasifier. To check the size effects of particles on flow fields in the gasifier, simulations were performed for five cases with four sizes of particles such as 40 $\mu\textrm{m}$, 60 $\mu\textrm{m}$, 80 $\mu\textrm{m}$ and 100 $\mu\textrm{m}$. Each case has a unique size of particles with one more case that has evenly mixed four sizes of particles. Predictions showed that the gasification which uses coals of the mixed sizes reveals more preferable gas velocity and temperature distributions than that uses coals of a unique size. Predicted gas temperature at the exit of the gasifier ranged 1,400 to 1580$^{\circ}C$, 1,480 to 1,700$^{\circ}C$, 1,600 to 1740$^{\circ}C$, 1630 to 1790$^{\circ}C$ and 1500 to 1680$^{\circ}C$ for particle sizes of 40 $\mu\textrm{m}$, 60 $\mu\textrm{m}$, 80 $\mu\textrm{m}$, 100 $\mu\textrm{m}$ and the evenly mixed four sizes, respectively.