• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.40.1-40.1
• /
• 2011

TZM합금은 융점이 높은 Mo 기지에 미세한 (Zr,Ti)C의 석출물이 분산되어 있어 고온에서 다양한 부품에 응용가능하다. 하지만, TZM합금이 대기중 고온에 노출될 경우, 초기 산화물이며 약 $600^{\circ}C$부터 기화가 시작되는 $MoO_3$상이 형성됨으로써 물성에 치명적인 영향을 미친다. 이러한 산화거동을 막기 위하여 표면보호 코팅을 필요로 한다. 본 연구에서는 복잡한 형상과 대량생산이 가능하며 표면 코팅층과 모재의 접합성이 가장 강하다고 알려진 확산코팅법을 이용하여 Si을 TZM 합금에 코팅하였으며, 코팅층의 형성 속도론을 이해하기 위하여 온도별 및 시간별로 코팅을 수행하여 시간과 온도에 따른 코팅층의 형성 기구를 고찰하고자 하였다. Si의 확산코팅결과, $MoSi_2$층은 $1350^{\circ}C$에서 산화시에 두께가 감소하였으며, $Mo_5Si_3$상은 두께가 성장하였다. 코팅층의 확산거동을 속도론적 분석을 통하여 규명하고 논의하고자 한다.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.575-582
• /
• 1995

Al 8090합금의 퇴화처리시에 나타나는 금속간화합물 변화과정과 PFZ 생성 및 입계석출물의 거동을 TEM을 사용하여 조사하였다. 기지에서는 $\delta$상, T$_{1}$ 상과 S'상이 모든 시편에서 관찰되었고, 입계어슨 PFZ이 형성되었다. 본 연구에 사용된 Al합금의 초기PFZ의 생성 기구는 입계의 임계공공 농도에 의한 것으로 나타났다. 2단계 열처리시 시간이 2분 이상이면 입계에 석축물이 형성되었다. 입계에는 중간단계로 5회전대칭축을 가지는 준안전상의 icosahedral상의 생성되었다. 평형 입계석출물은 사방정의 $Al_{13}$Fe$_{4}$였다.

• Journal of Welding and Joining
• /
• v.10 no.3
• /
• pp.40-53
• /
• 1992

고온고압장치(High Temperature and Pressure Vessels)의 적용을 위한 기초연구로서 9Cr-1Mo강 용접부의 연화특성에 대하여 검토하였다. 9Cr-1Mo 강재에 Bead-on-Plate용접을 실시한 후, 용접부의 기계적 성질과 그 현미경조직관찰 및 미세경도를 측정한 결과, As-Welded 및 용접 후열처리(PWHT)등의 조건에 관계없이 용접열향부의 변태역과 템퍼링역의 경계에서 모재의 경 도보다 낮은 경도값(연화역)을 나타내었으며 이러한 원인은 결정립계(Grain boundary)에 석출 되는 탄화물의 형성에 의한 뜨임 현상임이 판명되었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.313-318
• /
• 2017

The microstructure of a cobalt-base superalloy (ECY768) obtained by an investment casting process was studied. This work focuses on the resulting microstructures arising from different melt and mold temperatures in normal industrial environmental conditions. The characterization of the samples was carried out using optical microscopy, field emission scanning electron microscopy and energy-dispersive spectroscopy. In this study, the as-cast microstructure is an ${\alpha}-Co$ (face-centered cubic) dendritic matrix with the presence of a secondary phase, such as $M_{23}C_6-type$ carbides precipitated at grain boundaries. These precipitates are the main strengthening mechanism in this type of alloy. Other minority phases, such as the MC-type phase, was also detected and their presence could be linked to the manufacturing process and environment.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.135-135
• /
• 1999

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.983-984
• /
• 2004

• Journal of Korea Foundry Society
• /
• v.38 no.5
• /
• pp.103-110
• /
• 2018

The effects of a heat treatment on the carbide formation behavior and mechanical properties of the cobalt-based superalloy X-45 were investigated here. Coarse primary carbides formed in the interdendritic region in the as-cast specimen, along with the precipitation of fine secondary carbides in the vicinity of the primary carbides. Most of the carbides formed in the interdendritic region were dissolved into the matrix by a solution treatment at $1274^{\circ}C$. Solutionizing at $1150^{\circ}C$ led to the dissolution of some carbides at the grain boundaries, though this also caused the precipitation of fine carbides in the vicinity of coarse primary carbides. A solution treatment followed by an aging treatment at $927^{\circ}C$ led to the precipitation of fine secondary carbides in the interdendritic region. Very fine carbides were precipitated in the dendritic region by an aging heat treatment at $927^{\circ}C$ and $982^{\circ}C$ without a solution treatment. The hardness value of the alloy solutionized at $1150^{\circ}C$ was somewhat higher than that in the as-cast condition; however, various aging treatments did not strongly influence the hardness value. The specimens as-cast and aged at $927^{\circ}C$ showed the highest hardness values, though they were not significantly affected by the aging time. The specimens aged only at $982^{\circ}C$ showed outstanding tensile and creep properties. Thermal exposure at high temperatures for 8000 hours led to the precipitation of carbide at the center of the dendrite region and an improvement of the creep rupture lifetimes.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.569-574
• /
• 2001

The crystal structure, surface morphology and preferred orientation of the copper electrodeposit were investigated by the using sulfate bath with $SiO_2$suspensions and the cathode substrate Au sputtered. As by the addition of colloidal silica in copper electrolytic bath and Au pre-coating on substrate, the crystal particles of deposits was fined-down, made uniform and the account of particles were increased. Hardness of copper electrodeposits with colloidal silica increased about 15% in comparison with that of pure copper deposit film and (111), (200) and (311) plane of X-ray diffraction patterns were almost swept away, so preferred orientation of the copper deposits changed from (111) to (110) plane by codeposit $SiO_2$ and precoating the substrate.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1005-1112
• /
• 1995

The Effects of 0~9% stretching on the microstructure and mechanical properties have been investigated in Al-Li-Cu-Mg alloys. Stretching made T$_1$(Al$_2$CuLi) precipitates finer and more uniform, however, had no effect on the size of $\delta$'. The number of sheared $\delta$'precipitates distributed in the matrix were reduced. The 6% stretching improved the yield strength of the alloys aged at 15$0^{\circ}C$ for 120 hours from 328~342 MPa to 466~488MPa, however, decreased the elongation from 9.7~10.4% to 5.7%.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.11-16
• /
• 2009

Composite electrodes for redox supercapacitor were prepared potentiodynamically by the deposition of $RuO_2$ and the co-deposition of Ru-Co mixed oxide on the surface of single-walled carbon nanotube. Electrode of Ru-Co mixed oxide, in which Ru(13.13 wt%) and Co(2.89 wt%) were deposited on the carbon nanotube, exhibited a similar specific capacitance(${\sim}620\;F\;g^{-1}$) with $RuO_2$ electrode at a low potential scan rate($10\;mV\;s^{-1}$), but showed a superior one ($570\;F\;g^{-1}$) at a high scan rate($500\;mV\;s^{-1}$) than that of $RuO_2$($475\;F\;g^{-1}$). Such increase in the specific capacitance at high scan rate by the co-deposition of Ru and Co species was due to the structural support of Co species to provide the electronic conduction through Ru species.