• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (하)
• /
• pp.1251-1254
• /
• 2000

인터넷 우편 시스템은 웹상에서 작성한 우편을 수신자에게 메일뿐만 아니라 이를 인쇄하여 수신자에게 직접 전달해주는 우편 전달 시스템이다. 따라서 직접적인 우편을 전달함으로서 기존의 디지털 문명의 의한 각박해진 현 사회에 보다 인간미가 넘치는 매개체로서의 역할과 획기적인 시간 단축과 비용절감의 효과를 누리고자 한다. 현 인터넷 우편 시스템은 크게 3가지로 Front Agent, End Agent, Management Agent 나뉘어 지는데 본 논문에서는 Front Agent를 중심으로 서술하였다.

• 대한기계학회논문집B
• /
• 제28권11호
• /
• pp.1339-1347
• /
• 2004

Development of the low NOx heating boiler was strongly asked due to severe air pollution and the large number of boilers in korea. Compactness of the commercial boiler was also important because of low manufacturing cost and easy installation. In this study. newly developed compact low NOx burner, using turbulent gas diffusion combustion with multi-staged air supplies and multiple fuel nozzles, was investigated. Comparison study of the new burner was performed between experimental results and computational analysis. Commercial computational fluid dynamic(CFD) program named CFX-5.6 was used for numerical analysis of the low NOx burner inside the test combustor. Comparisons of experiment data and numerical result were performed under various equivalence ratio and fuel flow rate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.54-59
• /
• 2004

In this paper probabilistic fracture mechanics(PFM) approach is employed to evaluate the integrity of CANDU Zr-2.5Nb pressure tubes. Modified failure assessment diagram(Jr-FAD), plastic collapse, and critical crack length(CCL) approach are used for evaluating failure probability of the tubes. Jr-FAD was extended from the Kr-FAD because fracture of pressure tubes occurs in brittle manner due to hydrogen embrittlement of material by deuterium fluence. For developing the probabilistic integrity evaluation module, AECL procedures and fracture toughness parameters of EPRI were used.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.274-277
• /
• 2004

The most important mode of subcritical crack growth is primary water stress corrosion crack, which was the reported mechanism from the root cause analysis of the crack in the bimetallic welds. Stress corrosion crack growth evaluations was carried out for several flaw shapes of both axial and circumferential flaws, using the steady-state stresses including residual stresses. This evaluation considered the possibility of additional flaws in the primary loops of nuclear power plant, even though no such flaws have been identified by Ultrasonic Test. Consequently, Results show that the predicted flaw sizes will determine acceptability for continued service and maintenance.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 학술발표대회 논문집 제19권 2호
• /
• pp.197-200
• /
• 2000

This paper presents a time-based Pitch Determination Algorithm (PDA) for reliable estimation of pitch Period (PP) in speech signal. In proposed method, we use the Dyadic Wavelet Transform (DyWT), which detects the presence of Glottal Closure Instants (GCI) and uses the information to determine the pitch period. And, the proposed method also uses the periodicity property of DyWT to detect unsteady GCI. To evaluate the performance of the proposed methods, that of other PDAs based on DyWT are compared with what this paper proposed. The effectiveness of the proposed method is tested with real speech signals containing a transition between voiced and the unvoiced interval where the energy of voiced signal is unsteady. The result shows that the proposed method provides a good performance in estimating the both the unsteady GCI positions as well as the steady parts.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 학술발표대회 논문집 제19권 2호
• /
• pp.131-134
• /
• 2000

본 논문에서는 각 지역의 수중 음향 센서로부터 중앙의 정보 융합 센터로 전송되어진 동일한 또는 상이한 표적의 Identity 정보들을 종합해 최종적으로 표적의 Identity를 결정하는 Decision Fusion 기법을 다룬다. 기존의 연구는 표적의 속성 정보로부터 정보 융합을 통해 표적의 Identity를 선택하는 기법을 주로 다루고 있다. 그러나 본 논문에서는 기존의 연구보다 한 단계 나아가 선택된 표적의 Identity들로부터 운용자가 가장 합리적인 결정을 내릴 수 있도록 하는 표적의 Identity 결정을 위한 Decision Fusion 기법을 제안한다. 이러한 수중 음향 표적 식별 시스템에서의 Identity Decision Fusion 기법으로 Voting 기법, 센서 정보의 신뢰도를 고려한 Weighted Voting 기법, 그리고 다 기준 의사 결정 기법인 Analytic Hierarchy Process (AHP) 기법을 제안하고 그 성능을 평가한다

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.297-304
• /
• 1989

The dielectric properties of SrTiO3 GBL Capacitor have been investigaetd as a function of the second heat treatment time and the amount of Ta. The grain size of semiconductive SrTiO3 after sintering at 1,46$0^{\circ}C$ for 4 hours in N2/H2 atmosphere increased as the amount of Ta increased, and then decreased as the amount of Ta exceed 0.01 mole. Also, the dielectric constant after the second heat treatment showed the same tendency. When the semiconductive SrTiO2 was second heat treated at 1,10$0^{\circ}C$ in air with varying time, the dielectric constant increased as the second heat treatment time increased up to 60 minutes, and then decreased as the time became longer than 60 minutes.

• 대한원격탐사학회지
• /
• 제9권1호
• /
• pp.21-35
• /
• 1993

In this study, an integrated GMS(Geostationary Meteorological Satellite) receiving ground system, which includes the real-time reception and image processing of WEFAX data, has been developed. The demodulator, PC demodulator, PC interface and application softwares of the system were made and integrated with the commercially available antenna and receiver. Hardwars of the system were described in this part. This system operates at IBM PC/AT or above. It can be used for students at school and for application research in the fields of meteorology, oceanography, hydrology and astronomy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.90-95
• /
• 2004

The probabilistic fracture analysis is used to determine the effects of uncertainties involved in material properties, location and size of flaws, etc, which can not be addressed using a deterministic approach. In this paper the probabilistic fracture analysis is applied for evaluating the RV(Reactor Vessel) under PTS(Pressurised Thermal Shock). A semi-elliptical axial crack is assumed in the inside surface of RV. The selected random parameters are initial crack depth, neutron fluence, chemical composition of material (copper, nickel and phosphorous) and $RT_{NDT}$. The deterministically calculated $K_I$ and crack tip temperature are used for the probabilistic calculation. Using Monte Carlo simulation, the crack initiation probability for fixed flaw and PNNL(Pacific Northwest National Laboratory) flaw distribution is calculated. As the results show initiation probability of fixed flaw is much higher than that of PNNL distribution, the postulated crack sizes of 1/10t in this paper and 1/4t of ASME are evaluated to be very conservative.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.284-287
• /
• 2005

A fluidized bed reactor made of quartz with 0.055 m I.D. and 1.0 m in height was employed for the thermocatalytic decomposition of methane to produce $CO_2 - free$ hydrogen. The fluidized bed was proposed for the continuous withdraw of product carbons from the reactor. The methane decomposition rate with the carbon black N330 catalyst was quickly reached a quasi-steady state rate and remained for several hour. The methane decomposition reaction was carried out at the temperature range of $850-925^{\circ}C$, methane gas velocity of $1.0U_{mf}\;3.0U_{mf}$ and the operating pressure of 1.0 atm. Effect of operating parameters such as reaction temperature, gas velocity on the reaction rates was investigated. The produced carbon by the methane decomposition was deposited on the surfaces of carbon catalysts and the morphology was observed by SEM image.