• Journal of Sericultural and Entomological Science
• /
• v.52 no.1
• /
• pp.52-58
• /
• 2014

We analyzed rutin content using mulberry genetic resources. They were grown under the same environment and conditions. Mulberry leaves were collected and then freeze-dried and powdered for rutin test. As a result, mean content of mulberry strains was $0.52{\pm}0.25%$, and the coefficient of variation (CV) was 47.9%. The variation between the strains was greatly severe. Among the tested strains, 'Buyoungsang' was showed the highest content of 1.37%, whereas 'Cheongeunsipmunja' and 'Mujeonsipmunja' were showed the lowest content of 0.06% respectively. The content of rutin of 16 mulberry varieties for silkworm rearing were compared. 'Cheongolppong' was showed the highest content of 0.69%, whereas 'Cheongilppong' was showed the lowest content of 0.14 %. Finally we selected rutin high-containing 9 strains. They are as follows. 'Buyoungsang', 'Yeulbon', 'Dangsang 5', 'A8', 'Aja', 'Seongsu 5', 'Sawonppong 12', 'Hwanyoupjosaengnosang' and 'Hwansipjosaeng' which are more than twice of the overall average content.

• Economic and Environmental Geology
• /
• v.39 no.1 s.176
• /
• pp.1-7
• /
• 2006

This paper attempts to locate and define a quartzite deposit in Geochang, Kyongsangnam Province in order to establish its commercial viability. The quartzite deposit (Poongwon Mine) occurs as lens or boudinage at the contact between mica schist of the Deogyusan formation and granite gneiss. During Precambrian, regional metamorphism and granitization may have caused the formation ot quartzite layers through recrystallization and rearrangement of silica components derived from older sedimentary rocks, probably chert and/or sandstone. The deposit is composed of fine-grained milky, or light yellowish quartz showing weak laminations with fairly dense and rough appearance in outcrop. It reaches about $60\;m(height)\times140\;m(length)\times35m(width)$ with attitude of $N57^{\circ}E-N8^{\circ}4E\;and\;51^{\circ}-60^{\circ}NW$. The average grade of the quartzite samples is $SiO_2=94.4\;wt\%,\;A1_2O_3=3.3\;wt\%,\; Fe_2O_3=0.8\;wt\%,\;K_2O=0.7\;wt\%$, which can be used for foundry, constructional materials, or concrete making. The proved reserve was estimated as 200,811 tonnage.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.2 s.48
• /
• pp.47-58
• /
• 2007

This study examines the distribution of basement rocks in Gyochon-ri, Muan-eup, Muan-gun, Jeonnam where ground subsidence occurred in June 2005, and traces corrosion of limestone. Mica schist and rhyolite are distributed in the surface of the study area, but thick limestone layer with large and small caverns are distributed underground. A horizon of limestone with maximum width of 300 m and 4 km of length was found along the detour which is in the north of pound subsidence. Such identification of limestone presence would be very useful to predict potential ground subsidence. Limestone in this area was disturbed by fold and fault due to severe shearing deformation. Small caverns were frequently found in anticline part of folds formed in limestone layer. Schists with different thicknesses were intercalated in the limestone with shearing deformation and consist of sheet silicate minerals (chlorite and mica) and quartz. In sections of weathered specimen, it is shown that biotite of schist part was altered into chlorite and corrosion of calcite around the schist followed. This suggest that ground water permeated between intercalated sheet silicate minerals and corrosion of limestone began. And small caverns were generated where active corrosion occurred. This study suggests that because of many reasons (for instance, reclamation of the Bulmu reservior and excess pumping), cavern water level was lowered and cave sediments were removed, and it caused ground subsidence to occur.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.71-81
• /
• 2007

The marble-type dolomite from the Jasung Mine, which was farmed by duplicated affects of contact metamorphism and subsequent hydrothermal alteration, corresponds to a high-purity dolomite ranging up to above 98wt.% in dolomite contents. The dolomite contain minor impurities such as quartz, muscovite, and pyrite. It is characteristic that the dolomite is fairy Fe-rich corresponding to 0.4 wt.% due to the presence of pyrite of possible hydrothermal origin. The dolomite is nearly white-colored and constituting with subhedral crystals ranging $0.35{\sim}0.46mm$M in size, forming equigranular texture. Compared to the typical high-Ca limestone from the Pungchon Formation, the powder characteristics of dolomite is rather superior in milling efficiency, yields of fine particles, and size distribution. In addition, except for iron contents, the dolomite powder is no less superior than the limestone in quality and characteristics as fillers with respects to not only whiteness, oil absorption, and specific surface area but also shape characters such as elongation ratio, aspect ratio, and sphericity. This good characteristics of dolomite powder seem to be originated basically from comparatively higher grade and crystallinity of dolomite. Higher iron contents and the presence of sulfides prevents the dolomite from application for uses by thermal treatment, except for metallic manufacture. However, if proper ore separation procedure is available, the dolomite can be sufficiently utilized as substitutes for high-Ca limestone in most fields of filler industries.

• Journal of Sericultural and Entomological Science
• /
• v.52 no.2
• /
• pp.129-133
• /
• 2014

We analyzed rutin content using mulberry genetic resources. They were grown under the same environment and conditions. Mulberry leaves were collected and then freeze-dried and powdered for rutin test. As a result, mean content of mulberry strains was $0.38{\pm}0.17%$, and the coefficient of variation (CV) was 45.7%. The variation was greatly severe. Among the tested strains, 'Jangloe' was showed the highest content of 0.97%, whereas 'Sungsu 3' was showed the lowest content of 0.01% respectively. Finally we selected rutin high-containing 6 strains. They are as follows. 'Jangloe', 'Pumbo 6', 'Youjin', 'Kaeryangjeonjeon', 'Baekhak', and 'Pumbo 32' which are more than twice of the overall average content.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.594-609
• /
• 2023

TBM (Tunnel Boring Machine) method is gaining popularity in urban and underwater tunneling projects due to its ability to ensure excavation face stability and minimize environmental impact. Among the prominent models for predicting disc cutter life, the NTNU model uses the Cutter Life Index(CLI) as a key parameter, but the complexity of testing procedures and rarity of equipment make measurement challenging. In this study, CLI was predicted using multiple linear regression analysis and tree-based machine learning techniques, utilizing rock properties. Through literature review, a database including rock uniaxial compressive strength, Brazilian tensile strength, equivalent quartz content, and Cerchar abrasivity index was built, and derived variables were added. The multiple linear regression analysis selected input variables based on statistical significance and multicollinearity, while the machine learning prediction model chose variables based on their importance. Dividing the data into 80% for training and 20% for testing, a comparative analysis of the predictive performance was conducted, and XGBoost was identified as the optimal model. The validity of the multiple linear regression and XGBoost models derived in this study was confirmed by comparing their predictive performance with prior research.

• Journal of the Korean earth science society
• /
• v.21 no.4
• /
• pp.449-468
• /
• 2000

The Ordovician Chongson Limestone deposited in the carbonate ramp to the rimmed shelf shows diverse diagenetic features. The marine diagenetic feature appears as isopachous cements surrounding ooids and peloids. Meteoric diagenetic features are recrystallized finely and coarsely crystalline calcite, evaporite casts filled with calcite, and isopachous sparry calcite surrounding ooid grains. Shallow burial diagenetic features include wispy seam, microstylolite, and dissolution seam whereas deep burial features include stylolite, burial cements. blocky calcite with twin lamellae, and poikilotopic calcite. Dolomites consist of very finely to finely crystalline mosaic dolomite formed as supratidal dolomite, disseminated dolomite of diverse origin, patchy dolomite formed from bioturbated mottles, and saddle dolomite of burial origin. Silicified features include calcite-replacing quartz and fracture-filling megaquartz. Burial cements characterized by poikilotopic texture show ${\delta}^{18}$O value of -10.4 %$_o$ PDB, ${\delta}^{13}$C value of -1.0%$_o$ PDB and 504ppm Sr, 3643ppm Fe, and 152ppm Mn concentrations. Finely and coarsely crystalline limestones show similar ${\delta}^{18}$O and ${\delta}^{13}$C value to those of burial cements; however, they show lower Sr and higher Fe and Mn concentrations than burial cements. This suggests that very finely and coarsely crystalline limestones were recrystallized in freshwater and then they were readjusted geochemically in the burial setting whereas the burial cements were formed in relatively high temperature and low water/rock ratio conditions. Very finely and finely crystalline mosaic dolomites with ${\delta}^{18}$O value of -8.2%$_o$ PDB, ${\delta}^{13}$C value of -1.9 %$_o$ PDB, and 213ppm Sr, 3654ppm Fe, and 114ppm Mn concentrations, respectively are interpreted to have been formed penecontemporaneously in supratidal flat and then recrystallized in the low water/rock ratio burial environment. Geochemical data suggest that the low water/rock ratio burial environment was the dominant diagenetic setting in the Chongson Limestone. The Chongson Limestone has experienced marine and meteoric diagenesis during early diagenesis. With deposition of Haengmae and Hoedongri formations part of the Chongson Limestone was buried beneath these formations and it experienced shallow burial diagenesis. During the Devonian the Chongson Limestone was tectonically deformed and subaerially exposed. During the Carboniferous to the Permian about 3.3km thick Pyongan Supergroup was deposited on the Chongson Limestone and the Chongson Limestone was in deep burial depths and stylolite, burial cements, blocky calcite and saddle dolomite were formed. After this burial event the Chongson Limestone was subaerially exposed during the Mesozoic and Cenozoic by three periods of tectonic disturbance including Songnim, Daebo and Bulguksa disturbance. Since the Bulguksa disturbance during Cretaceous and early Tertiary the Chongson Limestone has been subaerially exposed.

• Economic and Environmental Geology
• /
• v.49 no.5
• /
• pp.371-380
• /
• 2016

This study aims to identify the mineraloical and petrographical characteristics of caprock from drilling cores of Pohang basin as a potential $CO_2$ storage site. Experiments and modeling were conducted in order to investigate the geochemical and mineralogical caprock effects of carbon dioxide. A series of autoclave experiments were conducted to simulate the interaction in the $scCO_2$-caprock-brine using a high pressure and temperature cell at $50^{\circ}C$ and 100 bar. Geochemical and mineralogical alterations after 15 days of $scCO_2$-caprock-brine sample reactions were quantitatively examined by XRD, XRF, ICP-OES investigation. Results of mineralogical studies, together with petrographic data of caprock and data on the physicochemical parameters of brine were used for geochemical modeling. Modelling was carried out using the The Geochemist's Workbench 11.0.4 geochemical simulator. Results from XRD analysis for caprock sample showed that major compositional minerals are quartz, plagioclase, and K-feldspar, and muscovite, pyrite, siderite, calcite, kaolinite and montnorillonite were included on a small scale. Results from ICP-OES analysis for brine showed that concentration of $Ca^{2+}$, $Na^+$, $K^+$ and $Mg^{2+}$ increased due to dissolution of plagioclase, K-feldspar and muscovite. Results of modeling for the period of 100 years showed that the recrystallization of kaolinite, dawsonite and beidellite, at the expense of plagioclase and K-feldspar is characteristic. Volumes of newly precipitation minerals and minerals passing into brine were balanced, so the porosity remained nearly unchanged. Experimental and modeling results indicate the interaction between caprock and $scCO_2$ during geologic carbon sequestration can exert significant impacts in brine pH and solubility/stability of minerals.

• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.433-444
• /
• 1993

Electrum (32~73 atom. % Ag)-sulfide mineralization of the Bodeok mine in the Boseong area was deposited in two stages of mineralogically simple, massive quartz veins that fill the fractures along fault shear zones in Precambrian gneiss. Radiometric dating indicates that mineralization is Late Jurassic age ($155.9{\pm}2.3$ Ma). Fluid inclusion data show that ore mineralization was formed from $H_2O-CO_2$ fluids with variable $CO_2$ contents ($X_{CO_2}=0.0$ to 0.7) and low salinities (0.0 to 7.4 wt. % eq. NaCl) at temperatures between $200^{\circ}$ and $370^{\circ}C$. Evidence of fluid unmixing ($CO_2$ effervescence) indicates pressures up to 1 kbar. Gold-silver deposition occurred later than base-metal sulfide deposition, at temperatures near $250^{\circ}C$ and was probably a result of cooling and decreasing sulfur activity caused by sulfide precipitation and/or $H_2S$ loss (through fluid unmixing). Calculated sulfur isotope compositions of ore fluids (${\delta}^{34}S_{{\Sigma}S}=1.7$ to 3.3‰) indicate an igneous source of sulfur in hydrothermal fluids. Measured and calculated O and H isotope compositions of ore fluids (${\delta}^{18}O_{water}=4.8$ to 7.2‰, ${\delta}D_{water}=-73$ to -76‰) indicate that mesothermal auriferous fluids at Bodeok were likely mixtures of $H_2O-rich$, isotopically evolved meteoric waters and magmatic $H_2O-CO_2$ fluids.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.2
• /
• pp.109-121
• /
• 2010

Mt. Mudeung is located in Gwangju city, Damyang-Gun, Hwasun-Gun and its round form give us the mood of soft and rich. Its location is $126^{\circ}06'-127^{\circ}01'E$ and $35^{\circ}06'-35^{\circ}10'N$ and its highest peak is Cheonwang-bong with the height of 1,187 m. The Gwangju city is located in the West of Mt. Mudeng and the mountain range with a small basin in its East. The pavilion such as the Soswaewon, Songganjeong, Sigyongjeong are distributed along the stream in the north of Mt. Mudeung. The mountain is formed from the volcanic activity, Gwangju cauldron during the Cretaceous. The top part of Mt. Mudeung is composed of dark gray quartz-andesite and its K-Ar whole rock age is $48.1{\pm}1.7Ma$. The composition of the north area, where the Wonhyosa temple is located, is micrographic granite, whereas the composition of south area is rhyolite mainly. The main ridge of Mt. Mudeung runs from North, starting from the Bukbong, to south, passing Cheonwangbong, Jangbuljae and ending Anyangsan. Geologic feature of the mountain includes volcanic landform, mountaineous landform, and stream landform. The Seosukdae, Ipseokdae, Gyubongam, which are main ridges and formed from volcanic activity, are composed of mainly columnar joint. Saeinbong and Majipbong in the south-west are composed of mainly cliff and dome. The typical erosion landform of the mountain has three different types of the weathering-cave, each of which reflect the property of the original rock. Four different area of wide block stream, they makes the geological feature of spring-water, though its scale is small compared to that of water fall.