• 대한건축학회논문집:구조계
• /
• 제35권1호
• /
• pp.3-10
• /
• 2019

The purpose of this paper is to find the fire-protection method for keeping on the bond capacity of Near-Surface-Mounted (NSM) FRP under high temperature. Experiments have been carried out to evaluate the bond capacity of NSM FRP by using CFRP-plates and to confirm the heat transfer to the concrete block when the refractory insulation is attached to the surface of NSM FRP. Bond test of NSM FRP under room temperature was conducted to obtain the maximum bond strength. And then a heating tests were carried out with keeping the bond stress of 30% of the maximum bond strength. As a result, the bond capacity of NSM FRP was disappeared when the temperature at epoxy reached to its glass transition temperature (GTT). In order to secure the bond capacity of the NSM FRP, it is necessary to protect the front as well as side by using insulation materials.

• 대한건축학회논문집:구조계
• /
• 제35권8호
• /
• pp.123-130
• /
• 2019

Recently, it is required to develop a monitoring technology that combines an FBG sensor as a means for continuously monitoring whether reinforcing effect of FRP is maintained on FRP reinforced structural members. However, most existing researches focus on the insertion of FBG sensors into bar-shaped FRPs, and there is insufficient study on the details strip-type FRPs combined with FBG sensors. Therefore, in this paper, it is studied to develop a reinforcement in which a FBG sensor is combined with a FRP strip. Especially, combination of FRP and FBG sensor. For this, a series of experiments were performed to find the adhesive strength of fiber-FRP-epoxy joints, the tensile strength of FBG sensor part with reflection-lattice, and the performance depending on the connection method of FRF and FBG sensor. As a result of the study, it was found that a minimum strength of $216.15N/mm^2$ is required for incorporating FBG sensors in FRP using epoxy. It is considered that the adhesion length of epoxy joints should be more than 50mm. When the FBG sensor is attached to the FRP strip as an epoxy, it is considered appropriate to use the complete attachment and the sensor non-attachment method.

• 대한건축학회논문집:구조계
• /
• 제35권11호
• /
• pp.137-146
• /
• 2019

Recently, the Near-Surface-Mounting method using Fiber reinforced polymer (FRP) has been developed and applied to the reinforcement of many concrete structural members. However, as a part of the fire resistance design, there is a lack of research related to fire insulation for the areas reinforced with FRP. In case of NSM reinforcement, there is a difference in the transferred temperature from the external surface to the groove corresponding to the location of the groove where the FRP is embedded, and the effect of this should be reflected in the fireproof insulation design. Therefore, in this study, after forming grooves for surface embedding in concrete blocks, fireproof insulation reinforcement was performed using Calcium Silicate (CS) fireproof board and an experiment to evaluate the temperature transfer was performed. By observing the temperature at these groove positions, the reduction of temperature transfer according to fireproof insulation detail was studied. As a result, when the NSM-FRP is properly fire-insulated using the CS-based fireproof board, the epoxy inside the groove does not reach its glass transition temperature until the external temperature reaches $800^{\circ}C$.

• 대한건축학회논문집:구조계
• /
• 제36권2호
• /
• pp.145-153
• /
• 2020

The purpose of this study is to investigate the effects of composition of underground structural wall and H-pile in soil cement. The results of previous experimental studies are re-analyzed and the nonlinear cross-sectional analyses of composite basement walls are performed to verify their nonlinear flexural behavior. Based on the study, it is explained how the gap deformation between H-Pile and RC wall should be considered in the design of flexure of composite underground walls. The nonlinear cross-sectional analysis shows that the load-displacement curves of composite basement wall specimens exhibiting flexural behavior exist between the results of the analysis of the complete and non-composite cases. When predicting the behavior of the composite basement wall by nonlinear cross-sectional analysis, the flexural behavior of the composite basement wall could be suitably predicted by considering the reduction of the composite ratio due to tensile stress acting on shear connectors.

• 한국보건간호학회지
• /
• 제36권2호
• /
• pp.212-226
• /
• 2022

Purpose: The purpose of this study was to explore nurses' experience of the role adaptation process and barriers in long-term care (LTC) facilities including nursing homes, daycare centers, and home visit nursing centers. Methods: After in-depth interviews with 13 nurses who were working at the LTC facilities in G province, the data were analyzed using Colaizzi's phenomenological methodology. Results: 17 themes with 6 theme clusters, and 2 categories emerged: nursing role adaptation process in the LTC (role expectation and readiness, role perception and performance, limits of role performance), and barriers to nursing role adaptation in the LTC facility (organizational, situational, and institutional-environmental barriers). Conclusion: The results showed that it is critical to establish the nurses' role in caring for the health of the elderly and maintaining the quality of care in the LTC facilities. In response to the growing demand for quality care in the LTC facilities, more institutional and environmental changes are needed to address the current barriers that prevent nurses from performing their appropriate roles.

• 문화기술의 융합
• /
• 제8권2호
• /
• pp.409-416
• /
• 2022

식재료로서 안전성이 확립되고 항산화성이 입증되어 있으며, 유익한 생리활성을 나타내는 성분을 동시에 섭취할 수 있는 과일 및 야채의 복합 추출물을 항산화 활성이 더욱 증가하도록 가공한 항산화성 복합 추출물의 항산화 활성을 평가하였다. 실험 결과에 의하면 항산화성 복합 추출물은, 사전 열처리 과정을 추가하는 것에 의해 DPPH 라디컬 소거능으로 측정되는 항산화능이 41% 증가하여 항산화성이 현저하므로, 항산화능을 이용한 약학 조성물, 화장료 조성물 또는 식품 조성물에 유용하게 사용될 수 있다는 결과를 얻었다.

• 한국동물학회지
• /
• 제21권1호
• /
• pp.19-27
• /
• 1978

서울, 강남구 서수동 일대가 격리된 集團이기 때문에 ankyloglossia가 높은 빈도로 나타났는지를 간접적으로 究明하고저 실시한 연구에서 다음과 같은 결과를 얻었다. 이 集團의 PTC 味覺　値에 관한 分布相은 他集團과 대개 일치하였다. 그러나 味盲者의 빈도는 남자가 여자보다 有意하게 높았으며 ankyloglossia가 남자에서 많이 발생한 현상과 비슷하였다. 그러나 味盲과 anakyloglossia가 어떤 상호관계가 있는지는 알 수 없었다. 舌運動의 rolling과 folding과 되는 경우는 서울의 他集團과 비교할 때 그頻度가 낮은 편이었다. twisting이 되는 경우는 남녀에 따라 차이가 심하였다. 色感異常의 頻度는 6.21%로 다른 集團보다 약간 높았다. 이와같은 결과로 보아 이 集團은 遺傳的으로 격리된 集團으로 추측되며, 舌動的, PTC 味覺 및 ankyloglossia 사이의 관계와 ankyloglosia의 遺傳樣式등은 앞으로 더 追究해야 할 문제로 생각된다.

• 동의생리병리학회지
• /
• 제28권5호
• /
• pp.548-557
• /
• 2014

The purpose of this study was to understand how vegetarian diets in Taiwanese hospitals are well established and provide suggestion for successful implementation in Korea. Micro-ethnographic case study with in-depth interviews, field observations, and paper reviews were used for this study. Experiences of doctors and nutritionists from Taiwanese hospitals where deliver vegetarian hospital diets were analyzed. This research found out Taiwanese life respect culture has influence on introducing vegetarian diets in hospital, besides most Participants agreed to use vegetarian diets for the medical purpose according to their clinic experiences and research results. Meanwhile there is no restriction to compel patients to keep vegetarian diets. All participants answered food has a large effect on the human body and further study on vegetarian diets' efficacy is required. The hospital chief's decision making is crucial to introduce vegetarian diets in hospitals. For the bigger picture, social supports, organizational supports and national policy supports are all important factors for it. The implications and recommendations for Korean hospitals were discussed. The public awareness for vegetarian diet for medical purpose along with research on its efficacy would be needed. In order to make good use of a vegetarian diet for medical purposes, we first need to build a vegetarian-friendly environment, go deep into the study of a diet's effects using diverse methodologies, and combine the diet with traditional medicine theory. Based on the results of this primary study, more related studies should be carried out in the future.

• 한국실내디자인학회논문집
• /
• 제21호
• /
• pp.89-93
• /
• 1999

A museum architecture has been developed as important representation of a specific period in architectural history. Modern concept of museum architecture has started by Karl Fredrich van Schinkel(1781-1841) through das Altes Museum(1823-1830) back in early 20th century and it continues to be the model for museum architecture for over 30 years. By middle of the 20th century, the movement of redefining new model for the new era on the subject of museum architecture was developed. This development was lead by the three masters of the modern architecture at the time. F.L. Wright, Corbusier, Mies and they were responsible and very active in creating new concepts. Their works in museum design became the prototype and they tried hard to make sure their new concepts to be the stepping stone for further development. This study is to compare the three different museums designed by those masters of the modern architecture, particularly on the issue of the exhibition spaces. The purpose of the study will be focused on the point of interior architecture such as the matters of layout and design characteristics of the exhibition spaces. And it will reveal the impact made by those masters on the advanced development of the current generations of museum designers as well as to describe the prototype of exhibition space. The analyzation was done on FLW's Guggenheim Museum in New York, Corbusier's the National Museum of Western Art in Tokyo, and Mies' Die Neue National Galerie in Berliv. Comparable materials were collected through site visits and reference documents from various publications. It will be ideal if this study can be used for further development in new museum design in this country.

• 한국자기학회지
• /
• 제9권4호
• /
• pp.196-202
• /
• 1999

본 연구에서는 마그네트론 스퍼터링 법으로 제작한 Mn-Ir/Ni-Fe/Buffer/Si 다층막에서 다양한 하지층과 적층구조에 따른 교환이방성과 미세구조에 대하여 고찰하였다. Ni-Fe 위에 Mn-Ir을 증착한 Top 구조의 경우에서는 (111) 우선방위에 상관없이 165 Oe 이상의 높은 Hex 값을 얻을수 있었다. 또한 Mn-Ir/Ni-Fe 계면에서 grain-to-grain epitaxy가 발생함을 알 수 있었다. 따라서 Mn-Ir/Ni-Fe 다층박막의 Hex는 Mn-Ir/Ni-Fe 계면에서의 Mn-Ir의 결정립 크기와 grain-to-grain epitaxy에 의존하며 Hc는 Mn-Ir/Ni-Fe의 계면거칠기에 의존한다는 것을 알 수 있었다.