• Korean Journal of Medicinal Crop Science
• /
• v.26 no.5
• /
• pp.401-407
• /
• 2018

Background: In Korea, seeds of Panax ginseng C. A. Meyer need to be stored under cold temperature and high humidity condition for months to break physiological dormancy, making storage difficult until spring-sowing. This study was conducted to test the effects of seed storage conditions and seed treatment on the emergence of seedling after spring-sowing in a nursery greenhouse. Methods and Results: After dehiscence, endocarp dried seeds in mild or completely, and wet seeds were stored in $2^{\circ}C$ and $-3.5^{\circ}C$ during winter. Storage at $-3.5^{\circ}C$ resulted in a lower emergence rate (ER) than that at $2^{\circ}C$, and additional cold ($2^{\circ}C$) treatment before or after storage at $-3.5^{\circ}C$ increased the ER. Endocarp dehydration prevented pre-germination at $2^{\circ}C$ storage and increased the ER of seeds stored at $-3.5^{\circ}C$. ER was also dependent on the batch of seeds. However, seed treatments before sowing had only limited effects on ER. Root loss was the main reason for damping-off; prolonged cold storage of seeds increased damping-off, as the detection of pathogens was not high. Conclusions: This study showed that storage conditions such as temperature and moisture content of seeds, affect the ER after spring-sowing and vitality of seedlings, suggesting further attention on seed control for secure seedling stands after spring-sowing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.51-58
• /
• 2014

This paper presents a fire exposure test result to evaluate fire resistance capacity of retrofit method using FRP (Fiber Reinforced Polymer) in reinforcement concrete structure. Especially, this paper focused on near-surface-mounted retrofit method; FRP is mounted into the groove after making a groove in concrete. In the test, main parameters are retrofit method and materials for fire proofing. Spray type of perlite and board type of calcium silicate were considered as external fire proof on surface while particle of calcium silicate and polymer mortar as internal one in groove. By increasing the temperature of inside heating furnace, the transfer of temperature from surface of fire proofing material to groove in specimen was measured. As a result, fire proofing using the board of calcium silicate was more effective to delay the heat transfer from outside than spraying with perlite. It was found that the fire proofing could resist outside temperature of $820^{\circ}C$ at maximum to keep the temperature of epoxy below glass transit temperature (GTT).

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.351-358
• /
• 1995

Oxidation behavior on the surface of Nd-Fe-B ribbon alloy has been studied by X-ray Photoelectron Spectroscopy. In the incipient stage of oxidation on the surface of "as-received" ribbon Nd-oxide film was formed from the fast oxidation of Nd and Fe was metal state in bulk. In process of oxidation time Fe was more abundant in the outmost surface of ribbon from the defused Fe through Nd-oxide film and layer structure of oxidation film was formed.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.341-350
• /
• 1995

$Nd_{14}Fe_{80}B_6$ ribbon alloy was manufactured with using melt-spinning method and analyzed the magnetic properties according to the manufacturing conditions. The microstructure and magnetic properties of melt-spun ribbons are sensitively dependent on the quench rate and annealing conditions. As-quenched $Nd_{14}Fe_{80}B_6$ ribbons with optimum magnetic properties are obtained at wheel speed($v_s$) of about 20m/sec and over quenched ribbons show optimum magnetic properties at $v_s$=22m/see when annealed for 30 minutes at $600^{\circ}C$ under vacuum. The crystallization temperature($T_k$) of $Nd_2Fe_{14}B$ phase is about $595^{\circ}C$ in the DTA analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.213-220
• /
• 2005

Recently, a concern to verify the displacement capacity of shear wall has been arised to produce suitable data for the performance based design. In this paper, a process is presented to evaluate the displacement capacity of shear wall. The displacement of shear wall is expressed as the superposition of shear and flexural deformation. Variable crack angle truss model with a modification and sectional analysis method are used in calculating shear and flexural displacement, respectively. In addition, the effect of axial force and the contribution of vertical and horizontal reinforcements in wall are considered in the analysis. The accuracy of proposed method is evaluated by the comparison calculation results with previous test results. From the comparison, it was shown that the hysteretic behavior of shear wall could be well predicted by using the process. In the case with flange wall, however, the method overestimates the contribution of flange wall for strength and stiffness and underestimates for displacement capacity.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.4
• /
• pp.493-498
• /
• 2001

Lung involvement in systemic sclerosis(SSC) is common but usually occurs late in the course. Skin changes usually occur before the pulmonary findings. In this report, a patient who developed pulmonary interstitial fibrosis without skin changes is presented. A diagnosis of SSC lung involvement was made histologically. The a nti-scl-70 antibody test was positive. Esophageal manometry revealed a lower amplitude in the lower two-third of the esophagus and pressure in the lower esophageal sphincter. Here we report a case of systemic sclerosis sine scleroderma presenting as pulmonary interstitial fibrosis with a review of the relevant literatures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.981-987
• /
• 2009

Recently, the study on wireless body area network for providing ubiquitous healthcare services has been actively done, including the standardization of the IEEE and others. Wireless body area network is usually configured in tree format using multi-hop communication mode due to the power limitation and the characteristics of human body. In this case, differently from existing sensor network, the wireless body area network tends to be disconnected due to the frequent movement of human body. The number of connections which can be supported at each node has some limitations due to the constraint imposed on power consumption. In this paper, we have proposed a heuristic algorithm for optimal selection of parent node with guaranteed QoS for a disconnected node, which considers the priority on packet transmission. Simulation has been performed to evaluate the performance of the proposed algorithm.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.189-196
• /
• 2000

The objective of this paper is to propose an analysis technique to predict the behavior of PC wall structures subjected to cyclic load. While PC wall panel is idealized by finite elements, the joints at which PC walls are connected each other are idealized by nonlinear spring elements. Axial and shear spring elements are developed for simulating shear, compression and tension behaviors of joints. The strength and stiffness of each spring elements we presented from the previous research results and incorporated into the computer program of DRAIN-2DX. The proposed analysis technique is evaluated by analyzing specimens previously tested and comparing with those. On the strength, stiffness, energy dissipation and lateral drift, analytical results show good agreements with test results. This means the proposed technique is effective to predict the response of the PC wall structures.

• Korean Journal of Weed Science
• /
• v.11 no.2
• /
• pp.137-141
• /
• 1991

This study was conducted to determine the response of newly developed chlorophyllous cells against photosynthesis inhibitory herbicides in LS medium. Inhibition of the growth of the selected chlorophyllous cells in the LS medium containing sucrose 1%, NAA $10^{-5}$ M and BA $10^{-6}$ M under light condition increased as the concentrations of paraquat increased from $10^{-6}$ M to $10^{-4}$ M. The calli died in $10^{-4}$ M paraquat treatment and the inhibition of calli growth was greater when $CO_2$ was supplied. In the treatment of herbicide diuron, the inhibition of calli growth also increased as the concentrations of diuron increased from $10^{-6}$ M to $10^{-3}$ M and more inhibition was observed at 1% sucrose than 2% sucrose.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.3
• /
• pp.198-206
• /
• 2016

Background: Electrical conductivity (EC) and pH are important features of nutrient solution, affecting both growth and quality of crops by altering nutrient uptake. Methods and Results: The pH values of nutrient solutions were controlled at 5.0, 5.5, 6.0, 6.5 and EC values were controlled at 0.68, 0.84, 1.23, 1.41 dS/m. Gingesng root weights were higher during the initial growth period when the plants were treated with low pH and low EC nutrient solutions. However, the higher pH and EC levels, the greater the increase in the rate of root weight between the initial and middle growth periods. The highest ginsenoside amount changed during growth period. The total ginsenoside amount was highest in the root, and the lowest in leaves at 45 and 90 days after treatment, respectively, with solution at a pH of 6.0. After 135 days of treatment, the highest total ginsenoside amount was detected in root treated with soluton with EC values of 1.23 dS/m. Conclusions: For the cultivation of ginseng using a nutriculture system, the pH and EC values of nutrient solutions should to be controlled based on the stage of growth and targeted plant organ (root or leaves).