• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.1
• /
• pp.3-10
• /
• 2019

The purpose of this paper is to find the fire-protection method for keeping on the bond capacity of Near-Surface-Mounted (NSM) FRP under high temperature. Experiments have been carried out to evaluate the bond capacity of NSM FRP by using CFRP-plates and to confirm the heat transfer to the concrete block when the refractory insulation is attached to the surface of NSM FRP. Bond test of NSM FRP under room temperature was conducted to obtain the maximum bond strength. And then a heating tests were carried out with keeping the bond stress of 30% of the maximum bond strength. As a result, the bond capacity of NSM FRP was disappeared when the temperature at epoxy reached to its glass transition temperature (GTT). In order to secure the bond capacity of the NSM FRP, it is necessary to protect the front as well as side by using insulation materials.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.8
• /
• pp.123-130
• /
• 2019

Recently, it is required to develop a monitoring technology that combines an FBG sensor as a means for continuously monitoring whether reinforcing effect of FRP is maintained on FRP reinforced structural members. However, most existing researches focus on the insertion of FBG sensors into bar-shaped FRPs, and there is insufficient study on the details strip-type FRPs combined with FBG sensors. Therefore, in this paper, it is studied to develop a reinforcement in which a FBG sensor is combined with a FRP strip. Especially, combination of FRP and FBG sensor. For this, a series of experiments were performed to find the adhesive strength of fiber-FRP-epoxy joints, the tensile strength of FBG sensor part with reflection-lattice, and the performance depending on the connection method of FRF and FBG sensor. As a result of the study, it was found that a minimum strength of $216.15N/mm^2$ is required for incorporating FBG sensors in FRP using epoxy. It is considered that the adhesion length of epoxy joints should be more than 50mm. When the FBG sensor is attached to the FRP strip as an epoxy, it is considered appropriate to use the complete attachment and the sensor non-attachment method.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.11
• /
• pp.137-146
• /
• 2019

Recently, the Near-Surface-Mounting method using Fiber reinforced polymer (FRP) has been developed and applied to the reinforcement of many concrete structural members. However, as a part of the fire resistance design, there is a lack of research related to fire insulation for the areas reinforced with FRP. In case of NSM reinforcement, there is a difference in the transferred temperature from the external surface to the groove corresponding to the location of the groove where the FRP is embedded, and the effect of this should be reflected in the fireproof insulation design. Therefore, in this study, after forming grooves for surface embedding in concrete blocks, fireproof insulation reinforcement was performed using Calcium Silicate (CS) fireproof board and an experiment to evaluate the temperature transfer was performed. By observing the temperature at these groove positions, the reduction of temperature transfer according to fireproof insulation detail was studied. As a result, when the NSM-FRP is properly fire-insulated using the CS-based fireproof board, the epoxy inside the groove does not reach its glass transition temperature until the external temperature reaches $800^{\circ}C$.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.2
• /
• pp.145-153
• /
• 2020

The purpose of this study is to investigate the effects of composition of underground structural wall and H-pile in soil cement. The results of previous experimental studies are re-analyzed and the nonlinear cross-sectional analyses of composite basement walls are performed to verify their nonlinear flexural behavior. Based on the study, it is explained how the gap deformation between H-Pile and RC wall should be considered in the design of flexure of composite underground walls. The nonlinear cross-sectional analysis shows that the load-displacement curves of composite basement wall specimens exhibiting flexural behavior exist between the results of the analysis of the complete and non-composite cases. When predicting the behavior of the composite basement wall by nonlinear cross-sectional analysis, the flexural behavior of the composite basement wall could be suitably predicted by considering the reduction of the composite ratio due to tensile stress acting on shear connectors.

• Journal of Korean Public Health Nursing
• /
• v.36 no.2
• /
• pp.212-226
• /
• 2022

Purpose: The purpose of this study was to explore nurses' experience of the role adaptation process and barriers in long-term care (LTC) facilities including nursing homes, daycare centers, and home visit nursing centers. Methods: After in-depth interviews with 13 nurses who were working at the LTC facilities in G province, the data were analyzed using Colaizzi's phenomenological methodology. Results: 17 themes with 6 theme clusters, and 2 categories emerged: nursing role adaptation process in the LTC (role expectation and readiness, role perception and performance, limits of role performance), and barriers to nursing role adaptation in the LTC facility (organizational, situational, and institutional-environmental barriers). Conclusion: The results showed that it is critical to establish the nurses' role in caring for the health of the elderly and maintaining the quality of care in the LTC facilities. In response to the growing demand for quality care in the LTC facilities, more institutional and environmental changes are needed to address the current barriers that prevent nurses from performing their appropriate roles.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.409-416
• /
• 2022

As a food ingredient, the extract has been proven of its antioxidant properties and safe to be consumed. It's increased antioxidant activity was evaluated by comparing its activity to the complex extract of fruits and vegetables, which is known to exhibit both antioxidant and physiological activities. In this experiment, after pre-heat treatment process, the increased antioxidant extract showed 41% of DPPH radical scavenging activity. The remarkable antioxidant activity of the produced extract will become useful in creating cosmetic or health products.

• The Korean Journal of Zoology
• /
• v.21 no.1
• /
• pp.19-27
• /
• 1978

This study has been carried out with the object of researching into the situation of the genetic isolation of a Korean population located near Seoul. The results obtained are summarized as follows: In general, the distribution of P.T.C. threshold values in the population is close to that of the Seoul population. But the nonataster frequency of male in the population is higher than that of female, and this is in agreement with the status of ankyloglossia frequency in male. However the relationship between the two traits has not been clarified. The gene frequencies of rolling and folding of tongue are slightly lower than that of the Seoul population. The gene frequency conditioning the ability to twist the tongue is lower in the male than in the female. The color-blindness is 6.21 percent, and it is slightly higher than that of other Korean population. All considered, the studied population might be regarded to have been kept in genetic isolation.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.5
• /
• pp.548-557
• /
• 2014

The purpose of this study was to understand how vegetarian diets in Taiwanese hospitals are well established and provide suggestion for successful implementation in Korea. Micro-ethnographic case study with in-depth interviews, field observations, and paper reviews were used for this study. Experiences of doctors and nutritionists from Taiwanese hospitals where deliver vegetarian hospital diets were analyzed. This research found out Taiwanese life respect culture has influence on introducing vegetarian diets in hospital, besides most Participants agreed to use vegetarian diets for the medical purpose according to their clinic experiences and research results. Meanwhile there is no restriction to compel patients to keep vegetarian diets. All participants answered food has a large effect on the human body and further study on vegetarian diets' efficacy is required. The hospital chief's decision making is crucial to introduce vegetarian diets in hospitals. For the bigger picture, social supports, organizational supports and national policy supports are all important factors for it. The implications and recommendations for Korean hospitals were discussed. The public awareness for vegetarian diet for medical purpose along with research on its efficacy would be needed. In order to make good use of a vegetarian diet for medical purposes, we first need to build a vegetarian-friendly environment, go deep into the study of a diet's effects using diverse methodologies, and combine the diet with traditional medicine theory. Based on the results of this primary study, more related studies should be carried out in the future.

• Korean Institute of Interior Design Journal
• /
• no.21
• /
• pp.89-93
• /
• 1999

A museum architecture has been developed as important representation of a specific period in architectural history. Modern concept of museum architecture has started by Karl Fredrich van Schinkel(1781-1841) through das Altes Museum(1823-1830) back in early 20th century and it continues to be the model for museum architecture for over 30 years. By middle of the 20th century, the movement of redefining new model for the new era on the subject of museum architecture was developed. This development was lead by the three masters of the modern architecture at the time. F.L. Wright, Corbusier, Mies and they were responsible and very active in creating new concepts. Their works in museum design became the prototype and they tried hard to make sure their new concepts to be the stepping stone for further development. This study is to compare the three different museums designed by those masters of the modern architecture, particularly on the issue of the exhibition spaces. The purpose of the study will be focused on the point of interior architecture such as the matters of layout and design characteristics of the exhibition spaces. And it will reveal the impact made by those masters on the advanced development of the current generations of museum designers as well as to describe the prototype of exhibition space. The analyzation was done on FLW's Guggenheim Museum in New York, Corbusier's the National Museum of Western Art in Tokyo, and Mies' Die Neue National Galerie in Berliv. Comparable materials were collected through site visits and reference documents from various publications. It will be ideal if this study can be used for further development in new museum design in this country.

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.196-202
• /
• 1999

The magnetic properties and the microstructures of the Mn-Ir/Ni-Fe multilayers with various stacking structures and buffer layer materials have been investigated. The (111) texture of Mn-Ir/Ni-Fe was observed in the top structures with Ta, Zr, or Ti buffer materials. However, all Mn-Ir/Ni-Fe multilayers with top structures exhibit high $H_{ex}$, regardless of the (111) preferred orientation of Mn-Ir film. The samples whose high $H_{ex}$ observed grain-to-grain epitaxial tendency and the large grain of Mn-Ir film at the interface. It can be explained that the $H_{ex}$ does not depend on the (111) texture of the Mn-Ir film and the interface roughness, but depends on the grain size of the Mn-Ir film and the morphology of the interface between the Mn-Ir and the Ni-Fe grains, and the $H_c$ depends on the interface roughness between the Mn-Ir and the Ni-Fe films.