• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.585-593
• /
• 2017

In this paper, we propose a deblocking filter hardware architecture for low-power HEVC (High-Efficiency Video Coding) in-loop for mobile systems. HEVC performs image compression on a block-by-block basis, resulting in blockage of the image due to quantization error. The deblocking filter is used to remove the blocking phenomenon in the image. Currently, UHD video service is supported in various mobile systems, but power consumption is high. The proposed low-power deblocking filter hardware structure minimizes the power consumption by blocking the clock to the internal module when the filter is not applied. It also has four parallel filter structures for high throughput at low operating frequencies and each filter is implemented in a four-stage pipeline. The proposed deblocking filter hardware structure is designed with Verilog HDL and synthesized using TSMC 65nm CMOS standard cell library, resulting in about 52.13K gates. In addition, real-time processing of 8K@84fps video is possible at 110MHz operating frequency, and operation power is 6.7mW.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.103-107
• /
• 2019

As the number of foreign tourists increases worldwide, it provides tourism services with various information and convenience. Most foreign tourists have difficulty using existing methods that require internet connection because internet communication is restrictive. In this paper, we propose a mobile device based digital signage via WPAN that can support multi-lingual for foreign tourists. the proposed method shows a menu by combining a template of mobile client with fundamental contents from digital signage through WPAN. To evaluate the performance of the proposed method, it is compared with a conventional webpage method. The results of the evaluation confirm that the latency decreases compared to the conventional webpage method due to the improved loading time.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.38-48
• /
• 2006

In this paper, we developed a hardware architecture of Reed-Solomon RS(255,239) decoder for the DMB mobile terminals. The DMB provides multimedia broadcasting service to mobile terminals, hence it should have small dimension for low power and short decoding delay for real-time processing. We modified Euclid algorithm to apply it to the key equation solving which is the most complicated part of the RS decoding. We also designed a small finite field divider to avoid the use of large Inverse-ROM table, and it consumed 17 clocks. After synthesis with Synopsis on Samsung STD130 $0.18{\mu}m$ Standard Cell library, the Euclid block had 30,228 gates and consumed 288 clocks, which gave the 25% reduced area compared to other existing designs. The size of the entire RS decoder was about 45,000 gates.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.173-186
• /
• 2000

Real-time embedded systems should accommodate many kinds of hardware platforms and resource management policies that vary depending on their operating environments and purposes. It is not an easy job to adapt a multitasking kernel to new system services and hardware platforms, as the kernel must strictly satisfy constraints on its size and performance. This paper describes the design and implementation of an object-oriented multitasking framework that can be reused for implementing microprocessor-based real-time embedded multitasking kernels, In this kernel framework, those parts that can vary depending on hardware platforms and system resource management policies are separated into the hot spots and encapsulated by abstract classes. Our framework thus can be effectively used to implement microprocessor-based real-time embedded kernels that demand high portability and adaptability.

• Journal of Broadcast Engineering
• /
• v.22 no.3
• /
• pp.366-374
• /
• 2017

Since a display device such as TV or digital signage is getting larger, the types of media is getting changed into wider view one such as UHD, panoramic and jigsaw-like media. Especially, panoramic and jigsaw-like media is realized by stitching video clips, which are captured by different camera or devices. However, a stitching process takes long time, and has difficulties in applying for a real-time process. Thus, this paper suggests to find out 2D Adjacency Matrix, which tells spatial relationships among those video clips in order to decrease a stitching processing time. Using the Discrete Cosine Transform (DCT), we convert the each frame of video source from the spatial domain (2D) into frequency domain. Based on the aforementioned features, 2D Adjacency Matrix of images could be found that we can efficiently make the spatial map of the images by using DCT. This paper proposes a new method of generating 2D adjacency matrix by using DCT for producing a panoramic and jigsaw-like media through various individual video clips.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.932-939
• /
• 1998

In this paper, we analyze the performance of a multicode-CDMA system which have been proposed for the multimedia communications. The performance of a multicode-CDMA system, providing good spectrum efficiency as well as serving various bit rates, is analyzed with multipath, frequency selective, slowly fading Rayleigh channel. Also the proposed scheme adopting RAKE receiver with MRC(Maximal Ratio Combine) is advantageous to multipath channel. For a practical channel modeling, the JTC(Joint Technical Committee) recommended channel model(JTC(AIR) 23-065R6) is applied to simulation. The proposed schemehas serial-to-parallel convertor which splits input data stream of 2 Mits/s into 20 branches o 100 kbits/s. From the result of simulation, the case of RAKE receiver with 3 fingers to reduce the system complexity required the relatively large $E_{b}/N_O$ of 0 dB~1.5 dB, compared to the case of RAKE receiver with the number of path finger to keep the average error rate to be $1{\times}10^{-3}$ in channel A.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.2
• /
• pp.287-295
• /
• 2017

Since Google's AlphaGo defeated a world champion of Go players in 2016, there have been many interests in the deep learning. In the financial sector, a Robo-Advisor using deep learning gains a significant attention, which builds and manages portfolios of financial instruments for investors.In this paper, we have proposed the a deep learning algorithm geared toward identification and forecast of the KOSPI index direction,and we also have compared the accuracy of the prediction.In an application of forecasting the financial market index direction, we have shown that the Robo-Advisor using deep learning has a significant effect on finance industry. The Robo-Advisor collects a massive data such as earnings statements, news reports and regulatory filings, analyzes those and recommends investors how to view market trends and identify the best time to purchase financial assets. On the other hand, the Robo-Advisor allows businesses to learn more about their customers, develop better marketing strategies, increase sales and decrease costs.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.363-376
• /
• 1997

In this paper, we present a hardware architecture and a sofrware architecture for cimputer based teleconferencing systems.And also we analyse stream adtivation mechanisms for them form the viewpoint of delay. MuX that is a multimedia I/O server provides various processing elements for data I/O, synchronization, interleaving and mixing.We describe methods to build teleconferencing systems with the elements and compares the technique using master click with the techniquie using self clock.In the plase of dta input.the technique using self click is berrer than the technique using master clock.When we generate interleved stream from audio and video stream and activate channel objects by periodic audio stream as activation clock, dealy from imput audio stream to imterleved stream is reduced but delay for video stream is not reduced as much as in the case of audio stream.

• The Journal of Bigdata
• /
• v.5 no.1
• /
• pp.209-225
• /
• 2020

This study tried to establish a base level for the form of ginseng in order to prevent fraud in which novice consumers, who have no information on ginseng and mountain ginseng, regard ginseng as mountain ginseng. To that end, researchers designed a service design in which when a consumer takes a picture of ginseng with an APP dedicated to a smartphone, the photo is sent remotely and the determined results are sent to the consumer based on machine learning data. In order to minimize the difference between the data set in the research process and the background color, location, size, illumination, and color temperature of the mountain ginseng when consumers took pictures through their smartphones, the filming box exclusively for consumers was designed. Accordingly, the collection of mountain ginseng samples was made under the same controlled environment and setting as the designed box. This resulted in a 100% predicted probability from the CNN(VGG16) model using a sample that was about one-tenth less than widley required in machine learning.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1038-1044
• /
• 2011

In this paper, the multichannel intermediate frequency transceiver for broadband multimedia system is designed and the experimental results are analyzed. Basic elements of the transceiver such as frequency synthesizer, amplifier, mixer, automatic gain control amplifier are introduced. The analysis technique described here applies not only to amplifier but also to any other nonlinear components such as mixers and frequency doubler. Through the investigation of the power spectrum density of the transmitted signal, the phase noise of the local oscillator is evaluated below 70 dBc/kHz. The frequency characteristics of the modulated signal is flat within the system bandwidth. Also the effects of adjacent channel interference and supurious emission are analyzed. And the function of automatic gain control amplifier is well operated.