• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.237-246
• /
• 2000

A broadband access network in B-ISDN subscriber network, plays a role of concentration or multiplexing of various subscribers into a service node. For call and connection control functions, DSS2 and B-ISUP signalling protocols are standardized for each of a subscriber side and a network node. B-BCC and B-ANCC protocol were proposed for VB5.2 interface. This interface allows dynamic control of ATM connections at the broadband access network. To establish an end-to-end ATM connection, interworking functions between VB5.2 interface's connection control protocol and the signalling protocol, are performed at the service node. A sequential interworking model and a parallel interworking model were proposed for these interworking functions. The sequential interworking model recommended by ITU-T causes an overall connection setup delay by introducing the access network, because this model proceeds the signalling protocol of network node after the response of VB5.2 interface protocol. On the other hand, the parallel interworking model proceeds the signalling protocol and the VB5.2 interface protocol simultaneously. The simultaneity of the parallel interworking model minimizes the overall connection setup delay. In this paper, we analyze and simulate above two interworking models with B-BCC or B-ANCC protocol in terms of a connection setup delay and completion ratio.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1126-1132
• /
• 2009

We carried out this study to reduce the gaps between medical institutes and between medical personnels and help to improve medical service quality, by classifying diagnoses and related intervention through the development of standard nursing intervention and by computerizing protocols. We considered two processes: one is the development process of home nursing standard intervention, and the other is the process of computerizing its related protocols. For the former, research covered analysis of home health care practices, development of client assessment protocol, of patients diagnosis protocols, and of patients intervention protocol. For the latter, strategies for home health care information systems should be set up and it constituted four research contents of analysis, design, management and evaluation of the systems. We also trained and educated home nurses who work at home health service center, by making them use the manual of home health care information systems at a certain city of P. In this study, therefore, we developed elements of standard home health care mediation so that they could be included in the forms of home health information note, home health progress note, and home health progress summary, home health discharge summary. Because standard home health care intervention has been developed, it became easier to exchange information between different home heath service center offices, can prevent from missing or redundant information, and contribute to standardization of hospital terminologies when EMR and HMR are developed.

• Quality Improvement in Health Care
• /
• v.15 no.1
• /
• pp.73-78
• /
• 2009

문제: 오늘날 간호사는 과거와 달리 현대적 보건의료 요구를 해결할 수 있는 체계적인 이론과 기술을 습득하도록 훈련된 고급 전문 인력이고, 간호행위를 생산하기 위해서는 서비스의 생산원가 뿐만 아니라 전문 인력으로서의 훈련 및 유지비용 등도 투입되어야만 가능하게 함으로서 2008년 7월부터 시행한 중환자실 간호등급에 따른 간호수가 책정으로 인해 중환자실 내에서 이루어지고 있는 많은 간호행위 중 수가를 받을 수 있는 부분이 생기게 되었고 간호행위의 중요성과 더불어 간호를 시행 후 받을 수 있는 수가에 대한 간호사들의 입력에 대한 의무도 늘어나게 되었다. 이에 빈번히 누락되고 있는 간호수가 관리를 통한 경제적 손실을 방지해야 할 필요성을 느껴 개선활동을 하고자 한다. 목적: 2008년 7월부터 시행한 중환자실 간호등급에 따른 간호수가 책정으로 인해 중환자실내에서 이루어지고 있는 간호 행위의 중요성을 인식하고 구체적인 문제 분석과 간호 현장에서의 개선안을 도출함으로써 경제적 손실을 방지할 수 있는 간호수가 누락률을 감소시키고자 함이다. 의료기관: 대구파티마병원 내과 중환자실. 질 향상 활동: 업무개선의 방법으로 환자 개인별 간호수가 입력 누락 방지 체크 리스트 사용 및 처방 전달 시스템의 간호수가 재입력 화면을 이용하여 입력의 용이성 도모하였고 입력된 간호수가를 처방 전달 시스템 간호수가 조회 프로그램을 이용해 익일 누락여부를 매일 모니터링 하였다. 교육 및 홍보활동으로는 간호수가 입력누락 방지를 위한 간호수가 입력 지침을 제작하여 전체간호사는 년 2회, 신규간호사는 개별 교육을 실시하였으며, 월별 간호수가 누락통계를 실명 공고 하여 간호수가 다 빈도 누락 간호사는 추가 개별교육을 실시하였다. 개선효과: 간호수가 입력 프로세스 개선을 통해 간호수가 평균 누락률이 개선 전 6.5%, 개선 후 1.2%로 5.3%의 누락 감소율을 보였으며 역치 5%를 달성하였고 간호수가 누락금액은 개선 전 2,992,752원, 개선 후 590,787원으로 2,401,965원의 누락 효과 비용을 구할 수 있었다. 본 QA활동으로 중환자실 간호수가 전산입력에 대한 체계적인 교육부재와 신규간호사들의 잦은 전산누락이 있어왔으나 표준화 된 체크리스트 지침과 입력확인 작업으로 전산입력 누락률이 감소하는 효과를 가져왔다. 추후 심평원 청구 작업을 하는 부서와 연계되어 실제 청구 누락률에 대한 비교와 간호사 근무연수와 간호수가 입력 누락률에 대한 상관관계 조사를 제언 해 본다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.2119-2122
• /
• 2002

기업의 비즈니스 프로세스가 복잡, 다양해짐에 따라, 현재 운영 시스템에 대한 급격한 기술적 변화를 수용하고 이를 조직적 측면의 기업 프로세스로 적용하기 위해 레가시 시스템의 현대화가 요구된다. 따라서, 현재의 기업들은 다양한 사용자들이 각자 그들의 관점에서 필요한 비즈니스 요구들을 웹 상에서 처리시킬 수 있도록 J2EE, .NET 등으로 대표되는 컴포넌트 및 웹 서비스 기술을 적용한 새로운 e-business 환경을 수용해야만 한다. 하지만, 기업 조직의 중요한 지식과 프로세스들을 처리하는 시스템들은 대부분 과거(Legacy)의 기술에 의해 개발되어졌으며, 이러한 시스템들을 새로운 비즈니스 환경에 적용하기에는 웹 환경을 위한 분산 아키텍쳐의 결여와 개방성과 표준화 미흡으로 시스템의 유지보수에 많은 어려움을 가진다. 또한, 방법론 차원에서 재공학의 절차와 기법을 체계적으로 정의하고 지원하기 위한 노력이 매우 부족한 실정이다. 본 논문에서는 레거시 시스템을 새로운 시스템 환경으로의 변환 및 통합을 위한 재공학 방법론 개발을 목적으로 프로그램 분석 활동을 설명한다. 본 논문에서 개발하고자 하는 방법론은 다양한 추상화 수준에서 역공학 정보를 복구하고, 컴포넌트화 단계를 통해 새로운 시스템으로 진화할 수 있는 절차 및 기법들을 제공한다. 레거시 시스템 컴포넌트화 방법론은 변환계획 단계, 역공학 단계, 컴포넌트화 단계, 인도 단계의 4 단계로 구성되어 있으며, 본 논문에서는 전체 단계 중 가장 기초가 되고 중요한 단계인 역공학 단계에 초점을 두고 프로그램 분석을 위한 절차 및 과정의 주요 지침들을 제시한다.0보다 유의적으로 우수하였으며, 맛, 다즙성 및 전체적인 기호도는 TMR-0 및 TMR-1 사이에 유의성이 없었다(p<0.05).能性)을 알아보고자 본(本) 실험(實驗)을 실시(實施)한 결과(結果), 유의성(有意性) 있는 결과(結果)를 얻었기에 보고(報告)하는 바이다.또한 이들 상피세포(上皮細胞)들을 투과전자현미경적(透過電子顯微鏡的)으로 관찰(觀察)하였을 때 초미세구조(超微細構造)가 잘 보존(保存)되었으나 Langer-hans cell내(內)의 Birbeck granule은 유리전(遊離前) 피부상피조직내(皮膚上皮組織內)의 Langerhans cell내(內)의 Birbeck granule에 비(比)해 수적(數的)으로 현저히 감소(減少)되어 있었다. 그러나 Thy-1 양성(陽性) dendritic cell에서 볼 수 있는 dense-core 과립(顆粒)은 별변화(別變化)없이 쉽게 관찰(觀察)될 수 있었다. 조직배양(組織培養)을 한 견(犬)의 keratinocyte에 대(對)해 사람 pemphigus vulgaris의 항체(抗體)로 반응(反應)시킨 후 protein-A gold(15 nm)로 표식(標識)시킨 바 제일 바깥 상층(上層)의 keratinocyte에 있어서 세포막표면(細胞膜表面)을 따라 표식(標識)되어 세포막항원(細胞膜抗元)을 나타내었으며, 이와 같은 소견(所見)으로 미루어 정상피부(正常皮膚) 중층편평상피세포(重層扁平上皮細胞)에서도 동일(同一)한 소견(所見)을 관찰(觀察)할 수 있다고 본다.al remnants, Resorption of fetus로 관찰된 것이다. Fetal death는 수정후

• International Commerce and Information Review
• /
• v.16 no.1
• /
• pp.3-24
• /
• 2014

When the Korean Wave was sweeping over China, Asia, Other Countries, Some people worried that the ambiguity of the copyright act would obstruct export of the entertainment contents. To solve this problem, the copyright authentication was introduced in the copyright act, enforcement for its, etc. There are two authentication systems at copyright. One is right authentication protected by copyright, Other one is licence authentication received from the owner. This study is meant to seeking the problem of insufficient regulation related to copyright authentication. According to analysis of FGI in this study, the existing system does not support a proper and specific way how to suggest a long term perspective in the transaction of Korean Contents between Korea and China. The key to success of copyright authentication system between Korea and China depends upon the implementation of the system of copyright mutual authentication. To do so, In reality, laws, institutions, technologies, policies, and operations, etc. should be Inter-operability. Also we should realize that this system gives mutual benefits at transaction between the two countries. Thus, it is important for two countries to effort trade cooperation continuously.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.11-20
• /
• 2014

For Web-based applications in IoT environment, IETF CoRE WG has standardizing the CoAP. One of limitations of CoAP is that CoAP standard does not consider the mobility management of the CoAP sensor node. In this paper, we propose the mobility management protocol of CoAP sensor node by considering the characteristics of the constrained network. The proposed mobility management protocol supports for Web client to be transmitted the sensing data from CoAP node reliably while the CoAP sensor moves into different wireless networks. To do this, we designed the architecture with the separate IP address management of CoAP sensor node and presented the mobility management protocol, which includes the holding and binding mode, in order to provide the reliable transmission. Finally, the numerical analysis and simulation with NS2 tool have been done for the performance evaluation in terms of the handover latency and packet loss with comparing the proposed mobility management protocol with other the existing mobility management protocols. The performance result shows that the proposed mobility management can provide the transmission of sensing data without the packet loss comparing with the existing mobility management protocol reliably.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.15-25
• /
• 2017

In recent years, polar research has been focused on climate change, natural resources, and development of a new North Pole Route. Since 2010, the Korea Polar Research Institute has been collecting various in situ data from the Arctic/Antarctic oceans using ARAON, which is the first effort of Korea toward leading global polar research. As a part of these activities, a web-based GIS service was developed to collect in situ data and to standardize data formats. Visualizations of in situ measurements and thematic maps were also developed to improve both the quantitative and qualitative quality of polar ocean research, and to increase accessibility of polar oceanographic data. This system will ultimately share all of the data acquired from the Arctic/Antarctic oceans with international research groups.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.12-28
• /
• 2017

The core of the transportation service, so-called Mobility 4.0 is the flexibility of the entire mobility and its implementation. By doing so, the most essential element is to build a platform to link a supply and a demand simultaneously. In other word, a comprehensive analytical framework is to be set with a data repository which can be periodically updated. With such circumstances, the entire trip chain including pedestrian movements is required to be thoroughly investigated and constructed at the viewpoint of the intermodal transit station. A few studies, however, have been attempted. In this study, the comprehensive analytical framework with the integrated mobility at intermodal transit station was proposed, which consisted of the three modules; 1) Data Repository Extracting from Smart Card DB, 2) Framework of Analyzing Integrated Mobility, and 3) Interpretation of the Integrated Mobility with GIS information and the other factors. A case study with the seven railway stations (Sadang, Sindorom, Samseong, Gwanghwanoon, Gangnam, Jamsil, Seoul Nat'l Univ. of Education) was conducted. The stations of the case study were clustered by the three groups with the statistical ground, and it is most likely to understand the effect of a variety of factors and a comprehensive data-driven analyses with the entire trip stages.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.937-950
• /
• 2004

With growing population of internet and web applications, distributed environment is considered to be the standard architecture of application. A network management systems(NMS) is necessary to control and monitor the complex network resources for providing and sharing the heft quality service. We recognize the NMS as a standard infrastructure for supporting efficient networking and a separate commercial applications. We believe every resource including software, hardware and environment for the network management should be separated from special protocols, vendors and applications. Therefore, We need a standard network management system that is efficient and consistent because of the heterogeous network features. In regards to software development, software reuse through assembling and extending the reusable elements such as patterns and components assures to realize the best productivity and quality The component based development(CBD) methodology that can assemble black box though well defined interfaces makes it possible to develop easer and quicker applications and is proved as the best software development solution involved in construction, selection and assembly of components. In this thesis, we describe the architecture for the network management and identify, define and design the components through analysis and design in the network management domain and Identified components mapped to the component architecture. We also specify the component development and design and implement the component for developing the network management. Implemented components apply to the component repository system that register, retrieve and understand the components. We analyze, design and implement the entire network management system based on configuration, connection, performance and fault management through the pre-developed components.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.17-27
• /
• 2007

The enhanced distributed channel access (EDCA) of IEEE 802.11e has been standardized for supporting Quality of Service (QoS) in wireless LANs. In the EDCA, support of QoS can be achieved statistically by reducing the probability of medium access for lower priority traffics. In other words, it provides statistical channel access rather than deterministically prioritized access to high priority traffic. Therefore, lower priority traffics affect the performance of higher priority traffics. Consequently, at the high loads, the EDCA does not guarantee the QoS of multimedia applications such as voice and video even though it provides higher priority. In this paper, we propose a simple and effective scheme, called deterministic priority channel access (DPCA), for improving the QoS performance of the EDCA mechanism. In order to provide guaranteed priority channel access to multimedia applications, the proposed scheme uses a busy tone for limiting the transmissions of lower priority traffics when higher priority traffic has data packets to send. Performance of the proposed scheme is investigated by numerical analysis and simulation. Our results show that the proposed scheme outperforms the EDCA in terms of throughput, delay, jitter, and drop under a wide range of contention levels.