• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.121-131
• /
• 2006

Since "Act on Private Participation in Infrastructure" were changed in January 2005, BTL(Build-Transfer-Lease) projects of Private Participation In Infrastructure was introduced in the domestic construction market for the purpose of providing public facilities with the public. Selecting the most qualified Promoter should be considered discreetly in BTL projects because BTL projects is for projects with approximately thirty year project life cycle, plan, construction, operating, maintenance and obviously the success of the project totally depends on the capability and role of concessionaire. However, score for cost is likely to influence designating concessionaire to take the project. Accordingly, low bid contract with too much competition could decrease the quality of the construction plan and operating plan. Thus, this study did preliminary research and documents on problems of evaluation criteria for designating concessionaire in BTL projects, and proposed improvement program by doing questionnaire over specialists of each field.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.153-163
• /
• 2008

Almost literature has so far proposed the modifications to IEEE 802.11 DCF MAC protocol to improve system throughput and average delay. Jitter(variance in packet delays) is, however, considered as an important QoS parameter for real-time streaming service which is popularized increasingly. Unfortunately, legacy access protocol for WLAN can't support the jitter. This paper proposes two schemes modifying the DCF MAC protocol to reduce the average value of jitter for multimedia frames arrived at received nodes. The one scheme, referred to as DCW-DCF(Decreasing Contention Window-DCF), reduces CW(Contention Window) size by half whenever a transmitted frame collided against other frames and back-off happens. Also, it increase initial CW size according as the link utilization and the collision probability increase. The other scheme, referred to as D-DIFS(Differential-DIFS), assigns different values to DIFS. That is, the DIFS interval is deceased as the number of back-off for a frame increases. In this paper, the two schemes are evaluated through simulation using ns2 and simulation results show that the proposed schemes are effective for improving the jitter property of standard WLAN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1004-1014
• /
• 1999

MAC protocols in wireless ATM has to increase and maintain the system throughput performance. To achieve these purposes, this paper proposes a dynamic control algorithm called DSPA (Dynamic Signalling Period Allocation) for wireless ATM MAC protocol. The proposed DSPA algorithm consists of the following three algorithms. First, a control slot generation algorithm which generates the control slots by utilizing static and dynamic parameters from the terminals, is proposed. Second, a dynamic signalling period allocation algorithm is proposed for a base station to dynamically determine each signalling period according to current terminal states, and thus allocates the optimal signalling periods. Finally, a dynamic slot allocation algorithm is proposed to dynamically determine priorities of the terminals whenever a slot is allocated. Simulation results indicates that DSPA algorithm decreases average packet delay of the terminals by dynamic allocation of signal periods based on the system utilization, and thus increases the limitation of allowable loads that quarantee quality of services. Also the proposed algorithm is shown to maintain stable throughput even in the case of traffic variations.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.53-60
• /
• 2011

In-Home Display (IHD) is one of the most popular ways to induce voluntary customer participation in energy savings. Various communication technologies are used for recent IHD implementations, but most IHD systems are designed for each house because of their limitations such as communication coverage area and operation complexity. In this study, 400MHz RF communication is used for economical large-scale deployment of IHDs especially for apartment complexes that represent typical residentioal environment in Korea. Since it is essential to use internal batteries to increase the usability of IHD, the frequent changes of them should be avoided. By dividing communication data into 3 types such as common data, long term data, and short term data depending on their update periods, energy efficient communication protocol is designed and proposed. In result, the quantity of data and the battery consumption of IHD are reduced to 23.4% and 31.5% each without harming service quality.

• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.538-548
• /
• 2008

In the Internet Engineering Task Force(IETF), Next Step in Signaling(NSIS) working group, proposed a mechanism to discover the Crossover Node(CRN), when the route is changed by Mobile Node(MN) handover. The CRN is divergence or convergence node on old and new path for reserving resources. Trough the CRN discovery mechanism, it possible to reduce a signaling delay and avoid the redundant reservation on the common path between old and new path. However, the QoS(Quality of Service) can be guaranteed continuously while the MN is performing handover, it is needed to pre-reserve the resource on the new path before completion of the handover. When the nodes on the new path try to make a pre-resource reservation before the handover, it is difficult to pre-reserve the resource with the existing CRN discovery mechanism. Therefore, we proposed a Passive CRN(PCRN) discovery scheme and pre-resource reservation mechanism. The PCRN which means an initial common point between the current reserved and the new paths, where the handover can take place.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.538-545
• /
• 2014

This paper proposes a coordinated multi-point (CoMP) based dynamic transmission scheme in a downlink multi-ship network, where a central ship selects a ship in order to maximize the utility function. The proposed scheduling scheme dynamically decides to the usage of the coordinated multi transmissions and selects a user to be served for every frame, in order to the utility function on the basis of the throughput and fairness. In particular, the proposed utilify function based scheduling scheme aims to increase the quality of service of ships at the edge of cells. Under the proportional fair scheduling, the simulation results show that the proposed utility function-based scheduling improves the throughput of the ships at the cell edge with the little sacrifice of the system capacity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.80-86
• /
• 2013

The 3-Dimensional(3D) localization system based on beacon expansion and coordinate-space disassembly for the design of the 3D localization system in indoor environment is proposed and the performance of the proposed system is analyzed in this paper. The localization ratio of the 3D localization system adapts the proposed algorithm is analyzed by the calculation of errors occurred in the coordinates that the mobile node locates. It is indicated that the average error distance of the 3D localization system adapts the proposed algorithm is less than that of the 3D localization system not adapts the proposed algorithm as 0.47m. The localization average distance error in 12 coordinates is indicated that the 1.5m case is less than 2.5m case as 0.38m by some experimentations under the condition that the distances between the ceiling and the mobile node are 1.5m and 2.5m measured from the ceiling respectively. It is seen that the 3D localization system based on beacon expansion and coordinate-space disassembly can improved the degradation of the quality of service that is caused by some conditions and performance differences in sensors.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.295-300
• /
• 2007

The Linux-based embedded systems such as mobile telephones. PDAs and MP3 players are widely in use. USB(Universal Serial Bus) is the interface for data communication between the computers and these peripheral devices. Some embedded systems like intelligent home networking and multimedia streaming require guaranteed QoS(Quality of Service), which is needed for real time transmission of UDP/IP messages through USB. Although USB Ethernet driver is supported by USB Gadget API in Linux, it is unable to provide the desirable QoS required by each type or small embedded systems due to the unpredictability or TCP/IP Stack in Linux. This paper proposes IP-Over-USB to improve QoS of UDP/IP message transmission in the embedded systems using USB in Linux system.

• Journal of KIISE:Software and Applications
• /
• v.31 no.8
• /
• pp.980-990
• /
• 2004

The component-based development methodology aims at the high state of abstraction and the reusability with components larger than classes. It is indispensible to measure the component so as to improve the quality of the component-based system and the individual component. And, the quality of the component should be improved through putting the results into the process of the development. So, it is necessary to study the component metric which can be applied in the stage of the component analysis and design. Hence, in this paper, we propose component cohesion, coupling, independence metrics reflecting the information extracted in the step of component analysis and design. The proposed component metric bases on the similarity information about behavior patterns of operations to offer the component's service. Also, we propose the redesigning process for the improvement of component design. That process uses the techniques of clustering and is for the thing that makes the component as the independent functional unit having the low complexity and easy maintenance. And, we examine that the component design model can be improved by the component metrics and the component redesigning process.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.2
• /
• pp.45-73
• /
• 2008

Quality has long been considered as an important factor in creating competitive advantage, and researches on quality have not been limited to off-line products but actively extended to e-services and information goods. However, given the nature of multi-dimensional aspect of quality, the systematic study on the quality of online service is still in its early stage. Especially, studies on the quality of ASP services have been rare in academic and professional journals despite the growth of ASP industry in its size and the rapid expansion in the range of application. In this paper we clarified the multi-dimensional quality aspects of the ASP service using a Garvin's framework (1984) which encompasses the service aspects of Products, and developed a measurement model for ASP service qualify. Then we empirically tested the effects of ASP service quality on user satisfaction and perceived firm performance using the data from 240 Korean small firms with less than 50 employees that had experienced the ASP service. Our results show that there are positive relationships among ASP service quality and personal performance, user satisfaction and perceived firm performance, and that product and service-related aspects of ASP service exert differential effects on performance measures so that the product-related aspects of the ASP service such as performance, features, reliability and conformance are considered to be more important in evaluating benefits from ASP services. Contrary to the approaches In literature where only the quality of online services is evaluated, our results emphasize the importance of differentiating Product and service-related aspects of ASP service and provide a basis for more comprehensive evaluation of ASP service quality.