• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.81-87
• /
• 2012

This paper focuses on three-dimensional measurement system of micro balls on micro Ball-Grid-Array(BGA) packages in-line. Most of visual inspection system still suffers from sophisticate reflection characteristics of micro balls. For accurate shape measurement of them, a specially designed visual sensor system is proposed under the sensing principle of phase shifting moire interferometry. The system consists of a pattern projection system with four projection subsystems and an imaging system. In the projection system, four subsystems have spatially different projection directions to make target objects experience the pattern illuminations with different incident directions. For the phase shifting, each grating pattern of subsystem is regularly moved by PZT actuator. To remove specular noise and shadow area of BGA balls efficiently, a compact multiple-pattern projection and imaging system is implemented and tested. Especially, a sensor fusion algorithm to integrate four information sets, acquired from multiple projections, into one is proposed with the basis of Bayesian sensor fusion theory. To see how the proposed system works, a series of experiments is performed and the results are analyzed in detail.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.412-412
• /
• 2012

갈륨비소(GaAs)는 수직공진표면방출레이저, 발광다이오드, 태양전지 등과 같은 광전소자에 널리 사용되는 물질이다. 그러나 높은 굴절률을 갖는 갈륨비소는 표면에서 30% 이상의 반사율을 갖기 때문에 광손실로 인해 소자의 성능이 저하된다. 따라서 표면 Fresnel 반사율을 낮출 수 있는 효율적인 반사방지막이 필요하다. 최근, 열적 불일치, 물질 선택, 접착력 저하의 단점을 가지고 있는 기존 다중박막을 대체하는 생체모방 서브파장 나노구조가 활발히 연구되고 있다. 이러한 구조는 공기(air)부터 갈륨비소까지 선형적인 유효굴절률 분포를 갖는 유효 단일박막과도 같기 때문에 소자 표면에서의 광손실을 줄일 수 있다. 더욱이, 자연계의 나방의 각막과 나비의 눈의 구조 형태를 모방한 반도체 생체모방 복합 눈(compound eye)은, 즉 마이크로 렌즈모양과 서브파장 나노격자구조의 복합적 형태, 표면에서 우수한 반사방지 특성을 나타낸다. 본 연구에서는, 포토리소그래피와 유도결합플라즈마 식각법을 이용하여 GaAs 기판 표면에 마이크로 렌즈 모양의 패턴을 형성한 후, 스핀코팅을 이용하여 나노 크기를 갖는 실리카 구를 도포하여 건식 식각함으로써 복합 눈 구조를 갖는 갈륨비소 반사방지막을 제작하였다. 제작된 샘플의 표면 및 식각 형상은 전자현미경(scanning electron microscope)을 사용하여 관찰하였으며, UV-vis-NIR spectrophotometer를 사용하여 반사율을 측정하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.3
• /
• pp.18-23
• /
• 2024

Nanoimprint lithography (NIL) is widely used to form structures ranging from micro to nanoscale due to its advantage of generating high-resolution patterns at a low process cost. However, most NIL processes require the use of imprint resists and external elements such as ultraviolet light or heat, necessitating additional post-processes like etching or metal deposition to pattern the target material. Furthermore, patterning on flexible and/or non-planar films presents significant challenges. This study introduces an extreme pressure imprint lithography (EPIL) process that can form micro-/nano-scale patterns on the surface of a flexible rubber magnet composite (RMC) film at room temperature without an etching process. The EPIL technique can form ultrafine structures over large areas through the plastic deformation of various materials, including metals, polymers, and ceramics. In this study, we demonstrate the process and outcomes of creating a variety of periodic structures with diverse pattern sizes and shapes on the surface of a flexible RMC composed of strontium ferrite and chlorinated polyethylene. The EPIL process, which allows for the precise patterning on the surface of RMC materials, is expected to find broad applications in the production of advanced electromagnetic device components that require fine control and changes in magnetic orientation.

• Tribology and Lubricants
• /
• v.33 no.3
• /
• pp.92-97
• /
• 2017

The understanding of the friction characteristics of micro-textured surface is of great importance to enhance the tribological properties of nano- and micro-devices. We fabricate rectangular patterns with submicron-scale structures on a Si wafer surface with various pitches and heights by using a focused ion beam (FIB). In addition, we fabricate tilted rectangular patterns to identify the influence of the tilt angle ($45^{\circ}$ and $135^{\circ}$) on friction behaviour. We perform the friction test using lateral force microscopy (LFM) employing a colloidal probe. We fabricate the colloidal probe by attaching a $10{\pm}1-{\mu}m$-diameter borosilicate glass sphere to a tipless silicon cantilever by using a ultraviolet cure adhesive. The applied normal loads range between 200 nN and 1100 nN and the sliding speed was set to $12{\mu}m/s$. The test results show that the friction behavior varied depending on the pitch, height, and tilt angle of the microstructure. The friction forces were relatively lower for narrower and deeper pitches. The comparison of friction force between the sub-micro-structured surfaces and the original Si surface indicate an improvement of the friction property at a low load range. The current study provides a better understanding of the influence of pitch, height, and tilt angle of the microstructure on their tribological properties, enabling the design of sub-micro- and micro-structured Si surfaces to improve their mechanical durability.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.170-174
• /
• 2021

As the rising attention to the medical and healthcare issue, Bio-MEMS (Micro electro mechanical systems) platform such as bio sensor, cell culture system, and microfluidics device has been studied extensively. Bio-MEMS platform mostly has high resolution structure made by biocompatible material such as polydimethylsiloxane (PDMS). In addition, three dimension structure has been applied to the bio-MEMS. Lithography can be used to fabricate complex structure by multiple process, however, non-rectangular cross section can be implemented by introducing optical apparatus to lithography technic. X-ray lithography can be used even for sub-micron scale. Here in, we demonstrated lines with round shape cross section using the tilted gold absorber which was deposited on the oblique structure as the X-ray mask. This structure was used as a mold for PDMS. Molded PDMS was applied to the cell culture platform. Moreover, molded PDMS was bonded to flat PDMS to utilize to the sub-micro channel. This work has potential to the large area bio-MEMS.

• Clean Technology
• /
• v.11 no.2
• /
• pp.69-74
• /
• 2005

A metal ion detector with a submicron size electrode was fabricated by field-induced AFM oxidation. The square frame of the mesa pattern was functionalized by APTES for the metal ion detection, and the remaining portion was used as an electrode by the self-assembly of MPTMS for Au metal deposition. The conductance changed with the quantity of adsorbed copper ions, due to electron tunneling between the mobile and surface electrodes. The smaller electrode has a lower limit of detection due to the enhancement in electron tunneling through metal ions that are adsorbed between the conductive-tip (mobile) and the surface (fixed) electrode. This two-electrode system immobilized with different functional groups was successfully used in the selective adsorption and detection of target materials.