• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.67-72
• /
• 2004

AC servo system has been implemented to FA system and also depends on its quality. Recently with the development of power switching device and DSP which has peripheral devices to control AC servo system, the servo technology has met a new development opportunity. A DSP based AC servo system with a 3-phase PMSM is proposed. The newly produced DSP TMX320F2812-version C which has the performance of fast speed, 150MIPS, and rich peripheral interface is used. Also space vector pulse width modulation (SVPWM) and the digital PI control are implemented to the servo system

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.833-840
• /
• 2022

The precision of automation equipment and motors in factories is required, and global motor market has increased significantly. However, domestic motor technology lags behind foreign technology. In this thesis, the precision stability and efficiency were compared with a linear algorithm by applying a non-linear algorithm to a PLC servo motor and an Arduino step motor in order to improve the technology of the motor. The nonlinear algorithm was able to shorten the same driving reference time because the maximum speed of the motor was faster than the linear algorithm, and it was confirmed that the precision was improved due to the low curvature.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.19-30
• /
• 1997

In this paper we design the optimal satellite-tracking antenna $H{\infty}$ control system using genetic algorithms. To do this, we give gain and dynamics parameters to the weighting functions and apply genetic algorithms with reference model to the optimal determination of weighting functions and design parameter ${\gamma}$ that are given by Glover-Doyle algorithm which can design $H{\infty}$ controller in the state space. These weighting functions and design parameter ${\gamma}$ are optimized simultaneously in the search domain guaranteeing the robust stability of closed-loop system. The effectiveness of this satellite-tracking antenna $H{\infty}$ control system is verified by computer simulation.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.127-132
• /
• 2023

Authors report the performance indicator of Roll to Roll MC (hereinafter referred to as RTR) through experiment that it is possible to process 2.0G acceleration, which cannot be coped with in the existing FPCB RTR, by reducing the weight of the Dancer roll system and controlling the torque using the servo motor. Proposed dancer roll system provides uniform tension to FPCB by solving problems such as high rotation speed, heat generation, and low torque, which were impossible to achieve with the conventional magnet clutch type RTR. Through the development of a lightweight processing method for rolls using magnesium material and the development of a torque control algorithm for servo motor, torque stability also increased. Due to the enabling technology developed in this study, the reaction speed of the dancer roll was improved and the target speed was achieved as well.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.29-32
• /
• 2018

본 논문에서는 IR-UWB(Impulse-Radio Ultra Wideband) 레이더와 서보 모터를 이용한 실내 환경의 물체 위치(거리, 각도) 탐지 방법을 제안한다. 기존의 카메라나 적외선을 사용한 기술은 비용이 비싸고 장애물이 있을 시 측정이 어려워 정확도가 떨어지는 단점을 가지고 있다. 반면 IR-UWB 레이더는 저 전력, 저 가격, 소형으로 구현이 가능하고 광대역을 사용하여 투과성이 좋다는 장점을 가져 실내 환경의 물체 움직임 탐지에 적합하다. 하지만 IR-UWB 레이더를 이용한 물체 탐지 시 각도 측정 없이 거리만을 측정하기 때문에 물체의 정확한 위치를 탐지할 수 없다. 이러한 점을 보완하고자 레이더를 모터 위에 설치하고 모터를 180 도 회전시키는 방법을 사용함으로써 넓은 측정 범위를 가짐과 동시에 물체의 위치를 보다 정확히 탐지해내는 결과를 보였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.2
• /
• pp.231-239
• /
• 1998

In this paper, we designed a current controlling servo system for speed control of a PMSM. In existing auto-tuning methods for PI controller parameters, the output response is delayed and the overshoot is generated. By solving these existing problems in this paper, a new PI auto-tuning method is applied to the speed controller for fast-response and reduced overshoot. PMSM servo systems offer a great advantage in unmanned factories where a great number of servo motors are employed, because of its easy maintenance characteristics and controllability. The implemented servo system is composed of absolute position detecting circuits of a rotor, a new auto-tuning PI control algorithm, a speed controller by using DSP, and power driving section. The proposed servo system is verified for it's practical availability by considering experimental results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.553-558
• /
• 2012

An effort for motion control of multi-axis in robot have been continued recently. In this paper, we propose implementation method for AC servo driver that can be easily motion control of multi-axis in robot. This proposed method implement EtherCAT communication technologies of bi-directional optical communication based on single optical core method that applied WDM for communication between control stage which is upper and AC servo drive stage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.191-194
• /
• 2011

This paper presents a study on the TMS320F28335 DSP (Digital Signal Processor) Controller and MOSFET inverter driver for the azimuth-elevation 2-axis heavy projectile system using BLDC (Brushless Direct Current) servo motors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.395-398
• /
• 2001

In this paper, we consider to apply of 2-DOF (Degree of Freedom) PID controller at D.C servo motor system. Many control system use I-PD, PID control system but the position control system have difficulty in controling variable load and changing parameter. We propose neural network 2-DOF PID control system haying feature for removal disturbances and tracking function in the target value point. Experiment result for 2-DOF PID controller with neural network are illustrated.

• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.158-161
• /
• 2006

현제 산업용 장비의 운용은 작업자가 장비를 사용되는 현장에 상주하며 관리하는 형태로 되어 있다. 그러나 이러한 거리와 시간의 제약은 실제 자동화의 실현에 큰 장애가 되고 있다. 현제 우리는 컴퓨터 네트워크의 급속한 발달로 인터넷을 통해 거리에 상관없이 세계 어디와도 데이터를 주고 받을 수 있다. 이러한 기술을 산업용 장비에 응용함으로써 거리의 제약을 극복하여 생산 현장의 효율성을 증가시킬수 있다. 본 논문의 목적은 DC 서보모터의 제어기를 자동 동조형 제어기로 설계하고 이를 웹을 이용하여 원격으로 사용자가 제어할수 있도록 하는데 있다. 개발 시스템의 구동 소프트웨어는 자동화 시스템의 다양한 분야에서 사용되는 그래픽 언어형식의 LabVIEW를 사용하였으며, 자동 동조방식은 릴레이 자동 동조법을 사용하였다.