• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.4
• /
• pp.1-8
• /
• 2001

In this paper, a hybrid mass damper using AC-servomotor was designed and developed in order to reduce vibration levels of a 5-story test structure under base excitation. Control performances of the HMD under random and earthquakes excitations are compared with those of TMD through experimental test. It is confirmed that the HMD is more effective to reduce the vibration levels of the test structure especially for the earthquake excitation which excites more than 2 vibration modes of the structure simultaneously.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.691-700
• /
• 2017

This paper describes the design and implementation of automatic braille converter based on image processing for a person who is visually impaired. The conversion algorithm based on the image processing converts the input image obtained by the web-cam to binary image, and then calculates the cross-correlation with the stored character pattern image by labeling the character area and converts the character pattern image into the corresponding braille. The computer simulations showed that the proposed algorithm showed 95% and 91% conversion success rates for numerals and alphabets printed on A5 paper. The prototype test implemented by the servo motor using Arduino confirmed 89%, conversion performance. Therefore, we confirmed the feasibility of the automatic braille transducer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.599-606
• /
• 2017

In this paper, the automatic control system of the stroller brake was designed and manufactured to reduce the safety accident of the stroller. The ultrasonic sensors are used to determine whether the handle of the driver's hand is touching or not, and the gyro sensor is designed to detect the current tilt of the baby carriage. If the next driver's hand is not recognized and the tilt exceeds a certain angle, the servo motor is activated and the hydraulic brake is operated to prevent the accident on the downhill road. Finally, in this paper, a smart phone-based application was developed to make the remote control of the brake possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5393-5397
• /
• 2011

The compressing-cutting device is used for manufacturing nano tube. the purpose of this study is to design and manufacture the compressing-cutting device witch has safety and stable performance. The most important core technology, in nano tube manufacturing, is to seam the each end of tube with appropriate pressure and to cut it off into the two part safely not to leak injected medium. Since the compressing pressure and the cutoff speed make the quality of nano tube, they are very important. This study will show the processes of design and manufacturing of compressing-cutting device.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.191-198
• /
• 2019

In this paper, we implemented the prevention of oil mixing accidents caused by stereotypes or novice drivers at gas stations. After the CO gas concentration of the fuel tank is measured using the MQ-9 gas sensor, the gasoline and diesel are distinguished from each other. This is decided by using a servomotor to lock of the fueling nozzle to prevent the mixing of oil. In addition, car washes time display is implemented by using infrared sensor to save the time and to provide convenience for customers who want to wash car after fueling.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.95-102
• /
• 1998

본 연구의 목적은 능동질량 장치를 이용하여 지진하중을 받는 건물모델의 응답을 제어하는 것으로서 실험에 사용된 능동질량 장치는 교류형 서보 모터에 의해 관성력이 건물모델의 응답에 반작용하여 제어를 하게 되는 원리를 이용한 것이다 소형 진동대에 의한 외부하중 묘사 신호처리와 제어력 발생을 위한 장비들이 구축된 실험 모델로써 능동 질량 추진기가 1층 전단형 건물모델 상부에 설치된 해석 모델을 실현하였으며 제어력 산정을 위한 선형 2차 제어 알고리듬은 LabVIEW 프로그램을 사용해서 구현하였다. 건물의 응답과 제어력을 고려해서 제어성능을 검증하였으며 능동 질량 장치를 설치함으러써 공진하중과 지진하중에 대한 건물의 응답이 감소하고 또한 속도피드백 알고리듬이 그 외의 피드백 알고리듬 보다 제어력이 가장 적게 소용되면서 건물의 응답을 감소시키는 것을 실험적으로 파악하였다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1115-1119
• /
• 2007

Five control methods (Speed Control, PID Gain Scheduling, Loop Time Control, Simple PID, Switching Control) have been applied to the control of an Inline Co-axial valve by the simulation of AMESim. The simulation results have shown that the speed control method is the most stable and the fastest way to reach to the set point in the simulation of the flow control. Moreover, It has been found that the five control methods have the almost same characteristics in the power consumption, the counter electromotive force, and the motor angular velocity. According to the analysis results, the fast and stable control characteristics of the speed control method is the most suitable for the flow control using a inline co-axial valve with a DC(BLCD) motor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.988-991
• /
• 2003

In this paper, we try to develop the controller which uses the block diagrams of SIMTool and internal functions CEMTool for planning the global driving controller for high efficiency AGV. We acquire the control efficiency by controlling the motor used each part of AGV driving controller. The block diagram structures provided with SIMTool is easily designed by the controller, and the monitoring and analysis of the results is researched by simulation. We expect to control AGV. robot and various plant using Ziegler-Nichols auto-tuning method and external I/O board

• Journal of Drive and Control
• /
• v.12 no.2
• /
• pp.14-20
• /
• 2015

This paper focuses on the issue of force synchronizing control for the injection servomechanism of injection molding machines. Prior to the controller design, a virtual design model was developed for the injection mechanism with an AC servomotor-ball screw. A synchronizing controller is designed and combined with the PID control to accommodate the mismatches between the real plant and the linear model plant used. Due to the plant uncertainty, the stiffness and the damping of the mechanism were considered. From the tracking control simulations based on the virtual design model, it is shown that a significant reduction in force synchronizing error is achieved through the use of a proposed control scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.44-50
• /
• 2004

The conventional sliding mode control(SMC) technique requires a prior knowledge of the upperbounds of external disturbance to guarantee a robust control performance. This, however, may not be easy to identity in practice. This paper presents a new methodology, sliding mode control with disturbance estimator(SMCDE), which offers a robust control performance without a prior knowledge of the upperbounds. The proposed technique is featured by an integrated average value of the imposed disturbance over a certain period. The proposed technique is applied to the position control of AC servo motor, and experimental results are compared between the conventional and proposed schemes.