• Journal of Power System Engineering
• /
• v.3 no.4
• /
• pp.22-27
• /
• 1999

Single phase heat transfer coefficients were measured for turbulent water flow in a plate & shell heat exchangers by using Wilson plot method. An experiment for counterflow heat exchange between the plate and shell was performed. The shell side heat transfer resistance was varied and the overall heat transfer coefficients were measured. The single-phase heat transfer coefficients in a plate side were obtained by Wilson plot method. Single-phase heat transfer correlations based on projected heat transfer area have been proposed for a plate & shell heat exchanger.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.875-881
• /
• 1998

Microemulsion is prepared by the method of phase inversion emulsification with d-limonene that is environmental friendly substance and nontoxic to human body as dispersed phase. Emulsifier used for preparation of microemulsion is nonionic surfactants, polyoxyethylene nonylphenyl ether. Stability of prepared microemulsion was estimated by the various method of ξ-potential, hydrodynamic diameter and electric conductivity. When d-limonene is emulsified by NP series, microemulsion is most stable and narrowly distributed at HLB value of 12.3(either one emulsifier or mixed emulsifiers). Stability of microemulsion is increased as the amount of emulsifiers is increased at same HLB value of 12.3. In the case of using the same amount of emulsifiers, number of produced micelle are relatively large as hydrodynamic diameter is small. Therefore, the state of microemulsion is stable and the electric conductivity is increased. One can determine that higher electric conductivity value means that microemulsion has more micelles and is more stable.

• The Journal of the Korean bone and joint tumor society
• /
• v.7 no.4
• /
• pp.157-161
• /
• 2001

Nearly a quarter of cases of non-Hodgkin's lymphoma present with extranodal, but rarely involve the soft tissue. The authors experienced one case of non-Hodgkin's lymphoma presenting as voluminous subcutaneous tissue tumors in the left axilla and arm.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.25-30
• /
• 2000

Plate and shell heat exchanger(P&SHE) has been applied to the refrigeration and air conditioning systems as evaporators or condensers fur their high efficiency and compactness. The purpose of this study is to analyze the characteristics of pressure drop in plate and shell heat exchanger. An experiment for single phase (low pressure drop in plate and shell heat exchanger was performed. Also numerical work was conducted using the FLUENT code for $ {\kappa}-{\varepsilon}$ model. The dependence of friction factor on geometrical Parameters was numerically investigated. The study examines the internal flow and the pressure distribution in the channel of plate and shell heat exchanger. The results of CFD analysis compared with experimental data, and the difference of frictor factor in plate side and shell side are 10% and 12%, respectively. Therefore, the CFD analysis model is effectively predict the performance of plate and shell heat exchanger.

• Journal of Sensor Science and Technology
• /
• v.11 no.4
• /
• pp.218-223
• /
• 2002

NASICON sensors that the NASICON electrolytes with various CaO amounts were sintered at low temperature($900^{\circ}C$), were fabricated to improve $CO_2$ sensitivity and stability in sensing behaviors. The manufactured device was shown good sensing characteristics and stability of output electromotive force at $250^{\circ}C$, comparatively low operating temperature.

• Laser Solutions
• /
• v.2 no.2
• /
• pp.34-41
• /
• 1999

A RS840 $CO_2$laser and a powder auto-feeding apparatus have been used to deposit single tracks of Ni-base superalloy on low carbon steel. In this paper, the effects of laser cladding parameters on clad geometry, dilution and microhardness are studied. As a results, the w/h ratio of the clad layer increases with decreasing powder feed rate and increasing laser scan speed. Increase of powder density and decrease of specific energy have little effect on dilution. It was found that the clad layer of the highest hardness has a structure in which fine and leaf like phases are dispersed in ${\gamma}$Ni matrix.

• Journal of the Speleological Society of Korea
• /
• no.90
• /
• pp.9-15
• /
• 2009

The pisolite of the limstone caverns in korea is one of the varieties of speleology. the main component of the pisolite is calcite, butpisolite often contains quartz and ilite too. the mechanism of encrusting is complicated,but the main process is the accretion which is supposed to take place as fast as 2mmper century.

• YAKHAK HOEJI
• /
• v.45 no.6
• /
• pp.677-682
• /
• 2001

investigate action of ethanol on histamine release from rat peritoneal mast cells, we compared the inhibitory effect of ethanol with those of calcium antagonists in mechanism of between ATP and compound 48/80-induced histamine release. Ethanol dose-dependently inhibited 100 ${\mu}{\textrm}{m}$ ATP-induced histamine release, whereas did not inhibit 1 $\mu\textrm{g}$/ml compound 48/80-induced histamine release. Verapamil, TMB-8 and EGTA dose-dependently inhibited ATP-induced histamine release, but did not inhibit compound 48/80-induced histamine release. Such an inhibitory effect of calcium antagonist was similar to that of ethanol. These results suggest that the inhibitory effect of ethanol on histamine release from rat peritoneal mast cells is mediated via disturbance of calcium mobilization..

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.480-484
• /
• 2000

• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.61-67
• /
• 1999

Silicone oil has organic and inorganic properties, and its skeleton is polysiloxane bonding that silicon is bonded hydrogen or organic group. Silicone compounds are very smooth and lubricant properties by low surface tension, low temperature dependence, and nonadhesive properties. Because of these properties, silicone compounds are used as many parts of chemicals, softener, smooth and libricant agents, water-repellent agent, and defoaming agent, etc. Emulsion was prepared with the inversion emulsification method which adopted the agent-in-oil method dissolving the polyoxyethylene(7) tridecyl ether(HLB 12.2) into methoxy terminated poly(dimethyl-co-methyl amino) siloxane and hydroxy terminated poly(dimethyl-co-methyl amino) siloxane in water. At this time, processed emulsion was almost microemulsion. When ratio of emulsifier increases, emulsion is stable bacuause microemulsion is solubilized by emulsion drop size and zeta-potential are decreased. But, when amount of electrolyte is increase, emulsion became unstable because emulsion drop size is increased.