• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.40-47
• /
• 2007

This paper described recycling of the bottom ash, sourced from the local incinerators as a fine sand for concrete. 10% bottom ash was substituted for the ordinary beach sand in the mortar(on a weigh basis), in conjunction with the pozzolznic diatomite. The specimens were tested according to KS L 5105 and analysed by TCLP(Toxic Chemical Leaching Procedure). The results showed that the hazardous heavy metals in the bottom ash are within the maximum permissible limit of TCLP. The compressive strength of the mortar with 10% bottom ash was highly improved, compared to the control mortar when the pozzolanic diatomite was used. It revealed that the hazardous heavy metals of the mortar with 10% bottom ash were leached within the maximum permissible limit of TCLP. It was concluded that the bottom ash can be reused as a fine sand for concrete when the pozzolanic diatomite was used as a stabilizer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.301-307
• /
• 2011

Turbo blowers are mainly used in refuse collection systems. We discuss blower performance in relation to the angle of the inlet vane installed at the upstream of the blower. The flow characteristics of the components are analyzed by three-dimensional Navier-Stokes analysis and compared to experimental results. A two-stage serially connected turbo blower is introduced to analyze the performance experimentally. Throughout the experimental measurements and the numerical simulation, the distorted inlet velocity generated in the small vane angle reduces the performance of the blower, because of the local leading-edge separation and the resulting non-uniform blade loading. We also perform a detailed flow analysis using the results obtained in the numerical simulation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.8
• /
• pp.992-1003
• /
• 2003

This study analyzes the actual state of the working uniforms worn by burning waste workers to protect their body from the hazardous environment. Directions for improvement of the clothing fabrics is also suggested. We visited and interviewed those persons who worked in the burning waste plant in Seoul and in Gyunggi Province. 245 workers were surveyed by questionnaires, and 211 workers out of 245 were statistically analyzed. Frequencies and percentages were calculated and $\chi$$^2$ test, ANOVA and Scheffe Post hoc comparison methods were utilized to test some hypothesis. The working uniforms were classified as four general types: separate type, disposable-coverall. overall, and winter clothes. At present, the working uniforms are not suitable for the conditions which they are used. There is a lack of ventilation and an inability to absorb perspiration limited elasticity, and the uniforms are prone to static shock. The degree of satisfaction varied significantly, based on the worker's educational background and main work. However, only a small percentage of workers interviewed were satisfied with the appearance and the fit of the present working uniforms. The working duration had a negative impact on the satisfaction of the worker. This results suggest that materials, colors, design and size of working clothes must be improved. The suggestions are as follows: Firstly. to use disposable non-woven fabrics finished to increase moisture regain. Secondly. to use the bad air permeability fabrics to protect the skin from absorbtion of harmful gases, flying dust, heavy metals, etc.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.1 s.55
• /
• pp.1-11
• /
• 2005

This research was performed to investigate the generation and physico-chemical characteristics of municipal solid wastes in the east coast of gangwon. The results were as follows: i) The generation rate of G city and Y gun were 0.187-0.384 $\cal{kg/cap/d}$ and 0.136-0.259 $\cal{kg/cap/d}$. Apparent density of G city and Y gun were 137.9-191.9 g/L and 157.3-238.3 g/L, respectively. ii) The wastes consisted of $76.1-97.5\%$ of combustibles and $2.5-23.9\%$ of incombustibles in G city. And the wastes consisted of $73.7-98.6\%$ of combustibles and $1.4-26.3\%$ of incombustibles in Y gun. Most of municipal solid wastes are composed of food, paper, and vinyl-plastics waste. Water content of commercial area, agricultural resident, detached resident, apartment area, school zone were 42.5-45.9, 37.6-43.4, 32.4-38.4, 29.3-32.3, $6.8-26.9\%$, respectively. iii) The low heating value of G city and Y gun were 1,125.5-2,540.7 $\cal{kcal/kg}$, 1,104.4-2,062.3 $\cal{kcal/kg}$, and school and apartment area were higher than commercial area.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.10
• /
• pp.574-579
• /
• 2016

This study assessed feasibility of making granular fertilizer with fly ash from a sewage sludge incinerator in Korea. Composition, characteristics, strength, and heavy metal contents of the granular fertilizers were investigated. Due to its high contents of phosphorus, fly ash from a sewage sludge incinerator could be used to make fertilizers. Granulation rates (2-4 mm granules) over 80% could be achieved as the fly ash contents were 15% or less of the fertilizer. Leaching tests of the fertilizers, based upon the Korean Standard Methods for Solid Wastes, showed the concentrations of heavy metals less than the risk limits. However, contents analysis of the fertilizers, based upon the Korean Standard Methods for Soils, experienced higher levels of heavy metals than the risk limits as the fly ash content exceeded 7% of the fertilizer. Thus, the fly ash needs to be added less than 7% of the fertilizer if there is no pretreatment to remove heavy metals.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.1
• /
• pp.69-78
• /
• 1987

Human wastes are rich in organic matter and therefore affect the dissolved oxygen when they are discharged into the sea. The breakdown of this organic matter liberates nutrients. The purpose of this study is to evaluate the self-purification capacity in the southern waters of the East Sea during the three cruises in June, July and August, 1986. Streeter and Phelps' model has been used in this study. Factors in this model, deoxygenation constant and reaeration coefficient, have been determined by applying oxygen consumption method and a closed system model. Deoxygenation constant and reaeretion coefficient are 0.177-0.313/day and 0.025-0.364/day respectively. The self-purification capacity to the DO value of 5mg/l is found to be $42.29\~434.25g\;BOD/m^2$, and to a great extent depends on the vertical mixing.

• Journal of Adhesion and Interface
• /
• v.6 no.2
• /
• pp.6-12
• /
• 2005

The plasma generally, ionized gas state, is the 4th material state composed the universe. Generating the plasma artificially has been studied by spending energy and it has a lot of applications in human's life. There are several merits to modify the surface of polymer using plasma. Above all, plasma maintains the property of polymer because of it changes the property of surface only. Also, it doesn't use a organic solvent and it is the environment friendship because of there are no waste under processing. Furthemore, in case of high-pressure plasma, it is possible that automated-processing continuously. In this study, we tried the reforming of surface to rise the adhesive strength between the material of polymer, experimented the rising of adhesive strength through a experiment of peel strength by virtue of processing time and using gas, confirmed the change of polymer's surface through measuring the surface contact angle analyzer and scanning electron microscopy (SEM).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.1
• /
• pp.68-74
• /
• 2002

This study was performed to examine the availability of electrolysis for removal of remaining biologically refractoty humus and residual color of leachate which is biologically pretreated in domestic waste matter sanitary landfill by recycling to landfill. The obtained results were as follows; 1) The electrolysis of leachate through covered bed represented that the removal efficiency of CODcr and color range from 70~80%, in color removal the only electrolysis for a treatment of leachate meet the critia of effluent. 2) The highest removal efficiency was represented in pH 7~8. 3) At anode used Al, Fe, Stainless the removal efficiency of CODcr and color was high in order of Fe, Al, stainless, in considering the settled ability of reaction product in economic or after electro coagulation the removal efficiency was highest when anode was the Fe electrode. 4) In this study conditions for removed both CODcr and Color ar the same time represented thar anode was used Fe, electrode-distance was 2cm and reaction time was 40min in 8volts.

• Korean Journal of Environmental Biology
• /
• v.22 no.1
• /
• pp.43-56
• /
• 2004

The seasonal distribution pattern of zooplankton were studied on the basis of the zooplankton samples collected from 9 stations in Jinhae Bay in May, August, November and February, 2001 to 2002. A total of 31 species in 37 taxa was occurred in Jinhae Bay. Copepods were pyedominant through fall to spring and cladecerans in summer. There aye high spatio-temporal fluctuations in the zooplankton abundance in a range of 27 to 28,221 indiv. $m^{-3}$. Of these, an neritic species, Acartia omorri and Oentropages abdominals were predominent in february; Palaealanus parvus s. 1 in November; Penilia avirostris in August. Species diversity was low in the northwestern regims where anoxia layer is occurred in summer, while in the other seasons there was no a great difference between stations. It indicates that the distribution pattern of zooplankton may be seasonally strongly affected by a mechanism of hypoxia formation in Jinhae Bay.

• Journal of Environmental Impact Assessment
• /
• v.27 no.4
• /
• pp.394-401
• /
• 2018

Tendency in ratio of biotope area of environmental impact assessment (EIA) according to population, location, project type, and total project area was analyzed by type of the projects. According to EIA, biotope area ratio is the ratio of the weighted biotope areas and total project area. biotope area is important to resident's health and quality of their life. Ministry of Environment recommends to meet the biotope area ratio standard presented by each project type. The analysis is based on 4 types of project, urban development, industrial comlpex deveopment, tourism development, and waste and sewerage treatment facility, and 55 data extracted from them. It is needed that new standard that the population is reflected, adjustment that region and frequency are considered, and regulation strengthening according to achievement of 'the minimum achievable goals' to improve biotope area policy. The research includes more data and improvements of specific system are needed as a further research.