• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.85-85
• /
• 2019

가는잎향유[Elsholtzia angustifolia (Loes.) Kitag.]는 꽃이 원줄기와 가지 끝에 조밀하고 아름답게 달리며, 전초에 함유된 정유성분의 향이 우수하여 관상 및 약용으로 이용되고 있다. 이에 본 연구는 관상소재로 이용가능한 가는잎향유의 분화 재배기술을 확립하기 위해 2018년 7월 2일에 유묘(4월 3일~5월 31일 육묘)를 포트에 정식하여 10월 15일까지 수행하였다. 대조구는 플라스틱 화분 10호에 원예상토를 충진한 다음 200구 트레이에 셀당 4립 파종하여 생산된 유묘를 정식하여 이용하였다. 기비처리는 싱싱코트를 0, 10 및 20알로 처리하였고, 추비처리는 정식 후 4주 간격으로 hyponex (4-6-6)를 0, 1000 및 $2000mg{\cdot}L-1$로 3회 엽면시비 하였다. 차광정도 실험은 0, 55 및 75%로 광량을 달리하여 수행하였다. 왜화제는 diniconazole과 daminozide를 각 0, 1000 및 $2000mg{\cdot}L-1$로 정식 후 4주차에 처리하였다. 연구의 결과, 기비와 추비 처리는 무처리와 비교하여 생육에 큰 차이가 없었으나, 절간장은 처리량이 증가할수록 억제되었으며, 처리시 무처리에 비해 유의적으로 감소하였다. 측지수 및 엽수는 기비 처리에 따른 큰 차이가 없었으며, 추비는 측지수와 엽수가 많아지는 경향이었다. 한편, 기비와 추비 처리는 개화율을 비교적 감소시키는 결과를 보였다. 차광정도가 증가할수록 초장, 절간장, 경직경, 화서수, 화서장이 감소하는 경향이 나타났으며, 무차광과 차광처리 간 측지수와 엽수는 유의적인 차이가 나타나지 않았다. 왜화제 처리는 무처리와 비교하여 절간장을 감소시켰다. Daminozide 처리시 측지수와 엽수는 무처리에 비해 증가하였으나 유의적인 차이는 없었고, 지상부의 생체중은 엽수와 측지수에 비례하여 무거워지는 결과를 보였다. 또한, $2000mg{\cdot}L-1$ 농도 처리시 개화율이 100%에 도달하였다. Diniconazole 처리는 무처리와 비교하여 큰 차이가 없었다. 따라서, 가는잎향유를 분화재배를 하기 위해서는 기비와 추비는 처리하지 않고, 무차광 조건에서 재배하는 것이 좋다. 또한, 왜화제는 daminozide $2000mg{\cdot}L-1$로 처리하는 것이 측지수, 엽수 및 개화율이 우수한 결과를 보여 분화 재배에 적합할 것으로 판단된다.

• Journal of Rhinology
• /
• v.25 no.2
• /
• pp.86-90
• /
• 2018

Background and Objectives: Although polyvinyl acetate ($Merocel^{(R)}$) has been widely used as a packing material after septoplasty, removable nasal packing can increase patient discomfort, local pain, and pressure. Furthermore, the removal of nasal packing has been described as the most uncomfortable and distressing feature associated with septoplasty. The purpose of this study was to investigate the efficacy of polyvinyl acetate with carboxymethyl cellulose sheet ($Rhinocel^{(R)}$) nasal packing on patient subjective symptoms, degree of bleeding, hemostasis, and wound healing following septoplasty. Subjects and Method: Forty patients with nasal septum deviation requiring septoplasty were included. Following surgery, one nasal cavity was packed with $Rhinocel^{(R)}$ and the other one with $Merocel^{(R)}$. Patient subjective symptoms while the packing was in situ, hemostatic properties, pain on removal, degree of bleeding on removal, duration of hemostasis after removal, postoperative wound healing, and the cost of the pack were evaluated. Results: Although the two types of packing materials were equally effective in controlling postoperative bleeding after septoplasty, $Rhinocel^{(R)}$ was significantly more comfortable while in situ and less painful on removal than $Merocel^{(R)}$, which was associated with significantly more bleeding on removal and so more time was needed to control hemorrhage. There was no significant difference in postoperative wound healing or pack cost. Conclusion: The use of $Rhinocel^{(R)}$ after septoplasty has less discomfort, greater patient satisfaction, and less bleeding on removal with no adverse reactions compared to $Merocel^{(R)}$ packing. Therefore, $Rhinocel^{(R)}$ may be a useful packing material after septoplasty.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.139-145
• /
• 2021

Plant-derived exosome-like nanovesicles (PELNs) are known to include various biological activities and possess high biocompatibility. Because PELNs can influence immune responses, cell differentiation, and proliferation regulation, they can be applied in multiple industries. However, the studies on the skin physiological of exosome-like nanovesicles derived from plant callus are insignificant compared to nanovesicles derived from mammalian cells. In this study, callus was induced from apple fruit (Malus domestica), and exosome-like nanovesicles (ACELNs) were isolated for improving skin barrier and anti-aging. The yield of ACELNs was 6.42 × 10⁹ particles/mL, and the particle size was ranged from 100 to 200 nm. HDF cells and HaCaT cells were concentration-dependent, increased in cell, and decreased in cytotoxicity. The cornified envelope formation was significantly increased compared to the control group. The COL1A1 expression and the FBN1 expression in HDF cells were increased. In addition, the ACELNs promoted collagen biosynthesis in UVA-irradiated HDF cells. These results might be considered as potential materials that could improve skin barrier and prevent skin aging.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.502-510
• /
• 2021

The objective of this study was to develop a novel ticagrelor-loaded self-nanoemulsifying drug delivery system with an enhanced solubility and dissolution rate. Numerous oils and surfactants were screened, then medium chain triglyceride (MCT) oil and the surfactants polyoxyethylene sorbitan monooleate (Tween 80) and Labrafil M1944CS were selected for the preparation of the ticagrelor-loaded self-nanoemulsifying drug delivery system. A pseudo-ternary phase diagram was constructed to detect the nanoemulsion region. Of the various formulations tested, the liquid SNEDDS, composed of MCT (oil), Tween 80 (surfactant), and Labrafil M1944CS (cosurfactant) at a weight ratio of 20/70/10 produced the smallest emulsion droplet size (around 20.56±0.70 nm). Then, particle size, polydispersity, and zeta potential were measured using drugs containing liquid SNEDDS. The selected ticagrelor-loaded liquid SNEDDS was spray-dried to convert it into a ticagrelor-loaded solid SNEDDS with a suitable inert carrier, such as silicon dioxide, calcium silicate, or magnesium aluminometasilicate. The solid SNEDDS was characterized by scanning electron microscopy, transmission electron microscopy, and in vitro dissolution studies. SEM, PXRD, and DSC results suggested that amorphous ticagrelor was present in the solid SNEDDS. Also, the solid SNEDDS significantly increased the dissolution rate of ticagrelor. In particular, the emulsion particle size and the polydispersity index of the solid SNEDDS using silicon dioxide (SS1) as a carrier was the smallest among the evaluated solid SNEDDS, and the flowability and compressibility result of the SS1 was the most suitable for the manufacturing of solid dosage forms. Therefore, solid SNEDDS using silicon dioxide (SS1) could be a potential nano-sized drug delivery system for the poorly water-soluble drug ticagrelor.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.179-184
• /
• 2021

Stratum corneum known as a skin barrier, which maintains water in skin, is the outer layer of the skin. Natural moisturizing factors (NMF) are one of the constituents in stratum corneum and amino acids are the highest components among NMF. In this study, we designed stearic acid-based solid lipid nanoparticles (SLNs) for improved skin penetration of serine (Ser). Ser-capsulated SLN was manufactured by double-melting emulsification method. The mean particle size and zeta potential of SLNs were 256.30 ~ 416.93 nm and -17.60 ~ -35.27 mV, respectively. The higher the degree of hydrophobicity or hydrophilicity of emulsifiers, the smaller the particle size and the higher the stability and capsulation rate. In addition, skin penetration was conducted using SkinEthic^TM RHE which is one of the reconstructed human epidermis models. The results of Ser penetration demonstrated that all SLNs enhanced than serine solution. The amount of enhanced Ser penetration from SLNs were approximately 4.1 ~ 6.2 times higher than that from Ser solution. Therefore, Ser-loaded SLN might be a promising drug delivery system for moisturizing formulation in cosmeceutical.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.67-78
• /
• 2022

Interest in bio-signal monitoring of wearable devices is increasing significantly as the next generation needs to develop new devices to dominate the global market of the information and communication technology industry. Accordingly, this research developed a resistive textile strain sensor through a wetting process in a single-wall carbon nanotube dispersion solution using an E-Band with low hysteresis. To measure the resistance signal in the E-Band to which electrical conductivity is applied, a universal material tester, an Arduino, and LCR meters that are microcontroller units were used to measure the resistance change according to the tensile change. To effectively handle various noises generated due to the characteristics of the fabric textile strain sensor, the filter performance of the sensor was evaluated using the moving average filter, Savitsky-Golay filter, and intermediate filters of signal processing. As a result, the reliability of the filtering result of the moving average filter was at least 89.82% with a maximum of 97.87%, and moving average filtering was suitable as the noise filtering method of the textile strain sensor.

• Applied Chemistry for Engineering
• /
• v.33 no.3
• /
• pp.309-314
• /
• 2022

Carbon dots (CDs) are few nanometer-sized carbon-based nanoparticles and emerging candidate materials in various fields such as biosensors and bioimaging due to their excellent optical properties and high biocompatibility. However, most CDs, emitting blue light, have limited their application in biomedical fields due to the low penetration of short-wavelength lights into the biological system. Therefore, there has been enormous need to develop long-wavelength emitting CDs. In this study, red-emitting CDs were successfully synthesized through the hydrothermal reaction of p-phenylenediamine with hydrochloric acid. In addition, the effect of the amount of hydrochloric acid on the formation of carbon dots, resulting in the variation of the chemical structures of CDs, were investigated, which was confirmed with the intensive structural analyses using infrared and X-ray photoelectron spectroscopy. It was found that the chemical structure of CDs governed their optical properties and quantum yield. Therefore, this study provides an insight into the role of acid in forming red-emitting CDs as the optimal probe for biomedical application.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.83-89
• /
• 2022

Since the pandemic of COVID-19, active investigation to develop immunity to infectious disease by delivering nucleic acids has been proceeded. Particularly, many studies have been conducted on non-viral vector as several vital side-effects which were found on nucleic acid delivery system using viral vectors. In this study, we have developed plasmid DNA (pDNA) loaded-hyaluronic acid derivative (HA) coated-polyethyleneimine (PEI) based polyplex for enhanced nucleic acid delivery efficiency. We have optimized the ratio of pDNA : PEI : HA by measuring size and protein transcription efficiency. The final product, polyplex-HA, was characterized through measuring size, zeta-potential and TEM image. Intracellular uptake and protein transcription efficiency were compared to commercially available transfection reagent, lipofectamine, through fluorescence image and flow cytometry. In conclusion, polyplex-HA presents a novel gene delivery system for efficient and stable protein transcription since it is available for delivering various genetic materials and has less immunoreactivity.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.386-391
• /
• 2022

This study is about a technique for obtaining collagen by extracting fat by treating collagen-containing liposuction effluent in the presence of supercritical fluid. Using a supercritical solvent, a collagen extract could be obtained from animal-derived fat in a short time (about 6 hours), and about 2-3% of collagen by mass compared to the raw material could be obtained. The presence of collagen in the extract obtained by supercritical extraction was confirmed by SDS-PAGE, and it was confirmed that it was type 1 collagen having a relatively large molecular weight. In addition, the growth factors of IGF-1, bFGF, VEGF and NGF were analyzed to find out which growth factors were present in the collagen obtained by supercritical extraction, and it was found that these growth factors were contained in the extract. There was no significant difference in DNA content per mg of sample before and after supercritical treatment. Further in-depth studies are likely to be needed on decellularization technology using the supercritical process. In conclusion, the extracellular matrix obtained through the solvent extraction process using a supercritical fluid contains growth factors above a certain amount even after decellularization and removal of fat, so that it was found that not only biocompatibility is greatly increased, but also tissue regeneration can be rapidly induced.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.188-193
• /
• 2022

The Korean mint (Agastache rugosa Kuntze) is used as a leaf vegetable. Therefore, it is important to improve the quality and quantity of leaves by maintaining vegetative growth. When the development of a plant is switched from vegetative to reproductive growth, leaf development may be lowered, leading to a decrease in marketability. Therefore, this study was conducted to investigate the effect of the photoperiod on the flowering characteristics and inflorescence development of the Korean mint to select an appropriate photoperiod for leaf production. The seeds were sown in 105-cell trays on 29 November 2021, and planted in each pot on 27 December 2021, when four main leaves appeared. After planting, the light/dark period was adjusted to 10/14hrs, 12/12hrs, 14/10hrs, 16/8hrs. After 19 days of planting, the first flowering occurred in 10/14hrs, which had a short photoperiod, and the 12/12hrs had 20 days for flowering, and other treatments had 21 days. In addition, it was confirmed that the Korean mint has the characteristics of facultative quantitative short-day plant, through the increase in the development of inflorescences as the light period is shorter than the dark period. As for the growth of Korean mint, the longer the photoperiod, the higher values were shown with leaf length, number of leaves, fresh weight, dry weight, and leaf area of the shoot. Therefore, it is considered that 14 h or more light period is suitable for increasing the productivity of Korean mint as a leafy vegetable.