• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.484-492
• /
• 2012

The present study aimed to investigate the effect of static magnetic field (SMF) on the growth and physiological characteristics of common indoor plant species. Five foliage plant species, Spathiphyllum spp., Ardisia pusilla DC., Syngonium podophyllum, Peperomia pereskiifolia, and Pilea cadierei were potted into plastic pot equipped with round type anisotropic sintered NdFeB permanent magnet inside the pot. The surface magnetic flux density of each magnet was 3,500 G. After 6 months of growth period, the biomass accumulations of Spathiphyllum, A. pusilla, and P. cadierei under SMF were statistically higher than those of controls. Tissue water content also increased under the influence of SMF in most species. The photosynthetic rate of Spathiphyllum under SMF significantly increased but other species showed no significant difference compared with control. Although there was no significant increase in the photosynthetic rates of A. pusilla, and P. cadierei, they showed remarkable increase in total fresh weight under SMF. This suggests that the demand of assimilates for normal metabolism could be decreased under magnetic influence and thereby biomass accumulation could be more favored. But this is not always true for all plant species because P. pereskiifolia in this experiment, showed no changes in both photosynthetic rate and biomass accumulation. Leaf nitrogen and chlorophyll contents were enhanced significantly in most plant species under influence of SMF. Chlorophyll a/b ratio also increased by SMF. Although there might be a limitation depending on plant species, these results suggest that long-term exposure to SMF might allow plant to have an enhanced acclimation capacity against environmental fluctuations and optimal application of SMF could increase the practical use of indoor plants such as an attempt to improve indoor air quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.4
• /
• pp.275-283
• /
• 2010

This experiment was conducted to construct process models to estimate grain weight (GW) and grain nitrogen content (GN) in rice. A model was developed to describe the dynamic pattern of GW and GN during grain-filling period considering their relationships with temperature, solar radiation and growth traits such as LAI, shoot dry-weight, shoot nitrogen content, grain number during grain filling. Firstly, maximum grain weight (GWmax) and maximum grain nitrogen content (GNmax) equation was formulated in relation to Accumulated effective temperature (AET) ${\times}$ Accumulated radiation (AR) using boundary line analysis. Secondly, GW and GN equation were created by relating the difference between GW and GWmax and the difference between GN and GNmax, respectively, with growth traits. Considering the statistics such as coefficient of determination and relative root mean square of error and number of predictor variables, appropriate models for GW and GN were selected. Model for GW includes GWmax determined by AET ${\times}$ AR, shoot dry weight and grain number per unit land area as predictor variables while model for GN includes GNmax determined by AET ${\times}$ AR, shoot N content and grain number per unit land area. These models could explain the variations of GW and GN caused not only by variations of temperature and solar radiation but also by variations of growth traits due to different sowing date, nitrogen fertilization amount and row spacing with relatively high accuracy.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.2
• /
• pp.47-61
• /
• 2000

Agroclimatic zoning was done for paddy rice culture in North Korea based on a simulation experiment. Daily weather data for the experiment were generated by 3 steps consisting of spatial interpolation based on topoclimatological relationships, zonal summarization of grid cell values, and conversion of monthly climate data to daily weather data. Regression models for monthly climatological temperature estimation were derived from a statistical procedure using monthly averages of 51 standard weather stations in South and North Korea (1981-1994) and their spatial variables such as latitude, altitude, distance from the coast, sloping angle, and aspect-dependent field of view (openness). Selected models (0.4 to 1.6$^{\circ}C$ RMSE) were applied to the generation of monthly temperature surface over the entire North Korean territory on 1 km$\times$l km grid spacing. Monthly precipitation data were prepared by a procedure described in Yun (2000). Solar radiation data for 27 North Korean stations were reproduced by applying a relationship found in South Korea ([Solar Radiation, MJ m$^{-2}$ day$^{-1}$ ] =0.344 + 0.4756 [Extraterrestrial Solar Irradiance) + 0.0299 [Openness toward south, 0 - 255) - 1.307 [Cloud amount, 0 - 10) - 0.01 [Relative humidity, %), $r^2$=0.92, RMSE = 0.95 ). Monthly solar irradiance data of 27 points calculated from the reproduced data set were converted to 1 km$\times$1 km grid data by inverse distance weighted interpolation. The grid cell values of monthly temperature, solar radiation, and precipitation were summed up to represent corresponding county, which will serve as a land unit for the growth simulation. Finally, we randomly generated daily maximum and minimum temperature, solar irradiance and precipitation data for 30 years from the monthly climatic data for each county based on a statistical method suggested by Pickering et a1. (1994). CERES-rice, a rice growth simulation model, was tuned to accommodate agronomic characteristics of major North Korean cultivars based on observed phenological and yield data at two sites in South Korea during 1995~1998. Daily weather data were fed into the model to simulate the crop status at 183 counties in North Korea for 30 years. Results were analyzed with respect to spatial and temporal variation in yield and maturity, and used to score the suitability of the county for paddy rice culture.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.3
• /
• pp.170-178
• /
• 2016

It is not clear how to apply the climate scenario to assess the impact of climate change in the agricultural sector. Even if you apply the same scenario, the result can vary depending on the temporal-spatial downscaling, the post-treatment to adjust the bias of a model, and the prediction model selection (used for an impact assessment). The end user, who uses the scenario climate data, should select climate factors, a spatial extend, and a temporal range appropriate for the objectives of an analysis. It is important to draw the impact assessment results with minimum uncertainty by evaluating the suitability of the data including the reproducibility of the past climate and calculating the optimum future climate change scenario. This study introduced data processing methods for reducing the uncertainties in the process of applying the future climate change scenario to users in the agricultural sector and tried to provide basic information for appropriately using the scenario data in accordance with the study objectives.

• Applied Biological Chemistry
• /
• v.27 no.2
• /
• pp.129-134
• /
• 1984

Change of protein component in soybean sprout grown at four temperatures was investigated by polyacrylamide gel electrophoresis. Main bands were identified using purified seed globulins. Electrophoretogram showed 5 main bands (a. b, c, d, and p) and 10 minor bands in seed and maximum number (19) of bands (8 main band including 0 and 11 minor) at 4th day after germination in cotyledon. All bands appeared in axis protein but resolution was poor. In cotyledon, a component (most rapidly) and b+c+d component decreased while o+p component and other minor components were increased at 6th day and decreased thereafter. In axis all components increased rapidly, especially in minor components and b+c+d component. High growing temperature accelerated decrease in cotyledon and increase in axis of protein, especially for 11S. The a component was identified as 7S, b+c+d as 11S and o+p as 2S globulin.

• Microbiology and Biotechnology Letters
• /
• v.10 no.2
• /
• pp.109-115
• /
• 1982

A Corynebacterium sp. capable of utilizing diaminododecane (DAD) were isolated from the soil by enrichment culture. Among 9 different kinds of substituted alkanes containing CN, NH$_2$, Cl, and SH groups (monoteminally or diterminally substituted) tested as carbon source, the isolate, designated as DAD 2-2. utilized DAD, putrescine dihydrochloride, dodecanethiol, dodecane and lautylamine. Thioanisole, decanedithiol, dicyanooctane, laurylcyanide, and dichlorodecane were not utilized. When emulgen 950 was added to the medium, the growth of DAD 2-2 was greatly accelerated. Isolated DAD 2-2 grown in the medium with DAD as carbon source formed ethyl $\alpha$-ketoglutarate. Metabolic product of DAD 2-2 grown in a medium without nitrogen source was different from that of grown in a medium with NH$_4$NO$_3$. When glucose, putrescine, n-dodecane and other alkane derivatives were tested in place of DAD, isolate DAD 2-2 yielded products different from those they formed with DAD suggesting specificity of DAD as a carbon source.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.284-289
• /
• 2010

Spectral irradiance of greenhouse covering films that three resins (red, blue, red plus blue) were added to get higher utilization efficiency of sunlight were compared to the normal film in this study. Growth and yield of tomato and pepper grown under the films were also investigated. Transmittance of PAR (photosynthetically active radiation, 400~700 nm) and sunlight (300~1,100 nm) of red or blue resin-added films increased by 5 to 6% and 0.5 to 1.0%, respectively. As compared to the normal film, fruit yield and soluble solid content of tomato and pepper grown under red plus blue resin-added film increased by 15 to 20% and by $0.5^{\circ}Bx$.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.65-70
• /
• 2014

The aim of this study was to identify the chronological growth characteristics of Gaeryangmeoru grapes, by observation of the developmental process of the axillary bud, fruit quality, and anatomical structure of the pericarp. No necrosis of axillary buds was observed, irrespective of node position of the shoot, from shoot occurrence to leaf fall. Berry weight, cluster weight, soluble solid content and titratable acidity were analyzed to be 1.2 g, 128.8 g, $16.9^{\circ}Brix$, and 1.57%, respectively, at maturity. The sugar was composed of fructose and glucose, with a ratio of 1:1 (fructose: glucose) at maturity. Malic acid was predominant among the organic acids, and conformed to the changes of chronological titratable acidity. Sugar and organic acid content changed dramatically starting a week before veraison. The degraded ovules were observed before and after fertilization, and the pericarp was composed of one epidermis, and seven to ten hypodermis layers at maturity.

• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.135-139
• /
• 1997

A new Sikbangpoong(Peucedanum japonicum Thunberg) variety, 'Sikbangpoog 1', was developed through a pure line selection at the Kyougpuk Provincial RDA during the period of 1990 to 1995. The variety was characterized to have higher stem height, leaf number and seed production, and larger root diameter compared with the check variety of Bonghwa Sikbangpoong but plant height of 'Siknagpoong 1' was similar to that of the check variety and it was also more tolerant to water and heat stress. Root color of 'Sikbangpoong 1' was yellowish brown and root shape of the variety was straight and conical. The root yields of Sikbangpoong 1 in yield trial, regional adaptation trial and farmer's field trial were always 10-28% higher than those of the check variety.

• Korean Journal of Plant Resources
• /
• v.24 no.1
• /
• pp.89-97
• /
• 2011

Shallot is a foreign crop introduced from France in 1995 as a new overwintering field crop with an aim to develop as an export crop. This study was conducted to investigate the effect of nitrogen fertilization level and time of supplementary nitrogen fertilization on growth and development of shallot, and to suggest to several problems raised during introductory trial cultivations. Optimum amount of nitrogen fertilization for bulb yield was 24 kg per 10 a. The best time of supplementary fertilization was February and March, with an equal amount in each month. The inorganic element composition of the harvested bulbs was not significantly affected by N fertilization level or by time of supplementary nitrogen fertilization.