• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.484-484
• /
• 2017

최근 홍수 시 제방붕괴로 인한 인명 및 재산피해가 증가되고 있어 노후화된 제방 시설물의 안전관리 체계에 대한 필요성으로 국토교통부에서는 국가하천유지보수 종합체계 시스템을 개발하였으나 아직 시범단계로 실무에 적용하여 활용하고 있지 못한 실정이다. 효율적인 국가하천시설에 대한 유지관리를 위한 자료D/B화 및 관리대장, 점검기법, 보수보기법 등을 제시하고 있으나 국가하천에 국한되어 있어 전국단위 하천시설물의 전주기에 대한 통합적인 관리는 반영되어 있지 못하다. 하천시설물 생애주기관리를 위해서는 모든 하천시설물에 대한 이력관리가 필요하나 현재는 시설물의 안전관리에 관한 특별법(시특법) 상의 1, 2종 시설물에 대해서만 시설물정보관리종합시스템(FMS)에서 이력관리를 수행하고 있는 실정이다. 따라서 본 연구에서는 국가하천 및 지방하천에 대한 하천시설물의 생애주기 관리방안을 도출하기 위해 기존의 시스템의 기능 및 구조를 분석하였으며 이를 통해 하천시설물 생애주기 관리방안을 제시하였다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.291-296
• /
• 2008

For the past two decades, 3D/4D CAD research has heel mainly focused on the design and construction phase of a facility life-cycle. However, there has been a general notion that the strength of 3D/4D CAD lends itself to other phases such as planning, operation and maintenance. In this research, a 3D/4D CAD model was generated in a commercial software platform. Then, the traditional 1:fe cycle facility management procedures are reviewed to, see any possible improvement opportunity with the 3D/4D CAD model as an example. A focus group interview, in conjuction with an extensive literature review, produced the list of area where 3D/4D CAD model could significantly benefit the traditional life cycle facility practices. Finally, a questionnaire-based survey was conducted with 155 respondents to statistically verify the feasibility of 3D/4D CAD for life cycle facility management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.13-20
• /
• 2016

The computerized management system for bridges is required due to the increased service life and number of bridges. This paper provides information and communication technology (ICT) - based bridge management system (BMS) to enable life cycle management through a comparative study with the development trend and function of domestic and foreign BMSs. BMS developed as an operation system combined an internet and mobile program, and was based on GIS technology and an object-based information management system. BMS supports the establishment of long-term strategies and short-term plans based on predicting the life-cycle performance profile and the necessary budget by object-based informatization for the whole life-cycle information of bridges. Useful knowledge information for supporting decision making was derived from the life-cycle management strategies establishment for approximately 6,000 existing bridges. BMS was developed to be applicable to all nationwide road bridges. In addition, it can be used practically to maintain the performance based on accurate maintenance result management, reducing cost by reasonable budget management, and enhancing the convenience and reliability of field data collection.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.1023-1032
• /
• 2006

In this paper, a new method for the bridge maintenance is proposed to overcome the limit of the existing methods and to implement the preventive bridge maintenance system. The proposed method can establish the lifetime optimum maintenance strategy of the deteriorating bridges considering the life-cycle performance as well as the life-cycle cost. The lifetime performance of the deteriorating bridges is evaluated by the safety index based on the structural reliability and the condition index detailing the condition state. The life-cycle cost is estimated by considering not only the direct maintenance cost but also the user and failure cost. The genetic algorithm is applied to generate a set of maintenance scenarios which is the multi-objective combinatorial optimization problem related to the life-cycle cost and performance. The study examined the proposed method by establishing a maintenance strategy for the existing bridge and its advantages. The result shows that the proposed method can be effectively applied to deciding the bridge maintenance strategy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.965-976
• /
• 2006

A realistic lifetime seismic-reliability based approach is unavoidable to perform Life-Cycle Cost (LCC)-effective optimum design, maintenance, and retrofitting of structures against seismic risk. So far, though a number of researchers have proposed the LCC-based seismic design and retrofitting methodologies, most researchers have only focused on the methodological point. Accordingly, in most works, they have not been quantitatively considered critical factors such as the effects of seismic retrofit, maintenance, and environmental stressors on lifetime seismic reliability assessment of deteriorating structures. Thus, in this study, a systemic lifetime seismic reliability analysis methodology is proposed and a program HPYER-DRAIN2DX-DS is developed to perform the desired lifetime seismic reliability analysis. To demonstrate the applicability of the program, it is applied to an example bridge with or without seismic retrofit and maintenance strategies. From the numerical investigation, it may be positively stated that HYPER-DRAIN2DX-DS can be utilized as a useful numerical tool for LCC-effective optimum seismic design, maintenance, and retrofitting of bridges.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.26-36
• /
• 2019

Since more than 30 different information systems are collecting and providing construction related information, it is difficult for information users to figure out where and how to acquire the required information. Even if the user find the information, it is hard to meet users demand. Because the current systems accumulate the data just as administrative data and can do not connect the information from the different phases of the lifecycle for the specific facility. The information collected and managed in different information systems should be integrated in terms of lifecycle of the facility to improve money for value of public investment, the quality of life by improving quality of the facility and to provide the foundation for big data utilization in the construction industry. This paper suggested strategic planning for the development of the (assumed name) "The Lifecycle Integrated Construction Information Portal" as a foundation to use the data in construction industry, by investigating prerequisites and suggesting conceptual framework of the system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.376-376
• /
• 2022

전 세계적으로 홍수의 발생빈도가 증가함에 따라, 하천 내 홍수피해를 경감하기 위해 설치하는 하천시설에 대한 중요성이 강조되고 있다. 하천시설은 홍수조절, 이수를 위한 흐름의 제어와 유도, 자연환경의 유지 및 개선 등 중요한 역할을 하고 있으나, 구조적으로 물과의 접촉이 많아 물리적 손상이나 노후화가 매우 빠르게 진행되는 특성이 있다. 시설물의 노후화가 지속될수록 안정성을 보장하기 어려워 자연재난의 규모를 증가시킬 위험성이 있다. 하천시설의 선제적 유지관리를 위해, 본 연구에서는 시설물통합정보관리시스템(Facilty Management System; FMS)의 정밀안전진단 결과를 활용하여 시설물의 사용연수에 따른 성능지표의 변화를 기반으로 회귀식 형태의 성능평가모델을 개발하였다. 기존연구와의 비교를 통해 성능평가모델의 적합성을 확인하였으며, 개발한 성능평가모델은 하천시설의 생애주기를 통합적으로 고려함으로써 정량적인 상태를 예측할 수 있다는 장점이 있다. 본 연구에서 제안된 성능평가모델 결과는 하천시설의 생애주기 관리를 위한 기초자료로 활용 가능할 것으로 기대된다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.357-360
• /
• 2010

본 연구는 효과적 생애주기 지원을 위한 사회기반시설물의 3차원 기반 정보모델의 활용방안에 대해 기술하였다. 3차원 기반 정보모델은 형상 정보뿐만 아니라 각 구성요소의 속성정보도 포함하고 있어야 하며, 의사결정 지원을 위한 엔지니어링 문서정보와도 연계 가능해야 한다. 이를 위하여 본 연구에서는 국제표준 데이터 모델링 도구인 IFC를 도로시설물에 적용하기 위한 확장방안을 제시하였고, XML을 이용한 엔지니어링 문서와의 통합연계 방안을 통해 사회기반시설의 효과적 생애주기 지원 전략을 제시하였다. 또한, 이를 활용한 구조해석 모델의 생성, GIS와의 연계 방안 도출의 실사례 구현을 통해 응용 도메인으로의 활용 가능성을 확인하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.2
• /
• pp.11-24
• /
• 2012

Recently, BIM (Building Information Modeling) technique is being considered as a critical delivery condition for the public projects according to the increase of best practices by practical application of BIM. However, since existing BIM studies are focused on the design and construction phases, those results are not considering the life cycle of a construction project. Therefore, this study suggests an integrated BIM operation process that enables an application of BIM for each phase of a construction project from planning to maintenance phases and develops an integrated BIM system based on the suggested methodologies. This study developed basic BIM functions and its application process by analyzing information systems in each project phase for a bridge construction project. Besides, this study performed case study and survey analysis for construction managers to verify a practical applicability of the developed system. Therefore, it is expected that the integrated BIM system is going to be utilized as a 3D-based integrated information management system considering life cycle of construction projects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.19-25
• /
• 2016

Engineering structures including civil infrastructures require a life-cycle cost and benefit during their service lives. The service life of a structure can be extended through appropriate inspection and maintenance actions. In general, this service life extension requires more life-cycle cost and cumulative benefit. For this reason, structure managers need to make a rational decision regarding the service life management considering both the cost and benefit simultaneously. In this paper, the probabilistic decision tool to determine the optimal service life based on cost-benefit analysis is presented. This decision tool requires an estimation of the time-dependent effective cost-benefit under uncertainty to formulate the optimization problem. The effective cost-benefit is expressed by the difference between the cumulative benefit and life-cycle cost of a deteriorating structure over time. The objective of the optimization problem is maximizing the effective cost-benefit, and the associated solutions are the optimal service life and maintenance interventions. The decision tool presented in this paper can be applied to any deteriorating engineering structure.