• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.387-389
• /
• 2016

본 연구에서는 국가종합전자조달 시스템(이하, 나라장터)에 대한 생산성과 효과를 업무처리량을 기준으로 실증하였다. 기존의 연구방법은 인력 및 자본의 투입에 따른 부가가치를 생산성으로 산정하고 설문자료 및 지표 등으로 효과를 산정해 왔다. 본 연구에서는 정량적인 요인을 측정하기 위해 실제 정보시스템에 기록되는 문서량을 기준으로 업무모델 및 가설을 선정하였다. 생산성에 영향을 주는 계약건수, 문서처리, 통화시간 등을 행정업무에 소요되는 수기 또는 법적인 소요일수 등을 비교대상으로 하여 생산성을 산정하였다. 마지막으로 결과를 검증하기 위해 요인의 기술통계적 검정과 회귀분석으로 모델을 실증하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.2 s.30
• /
• pp.127-137
• /
• 2006

Productivity is important to evaluate an efficiency of performed work and organization in construction industry. The productivity should be defined as activity level rather than macro level in order to effectively use productivity data and manage a project. The primary objective of this study is to develop a construction productivity management system using data warehouse, OLAP and data mining technologies which enables to easily accumulate the construction productivity data and perform multi layer analysis. Finally, it is anticipated that the effective use of the developed system would be able to measure the result of project and make a plan of the similar project with reliability.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.421-423
• /
• 2005

소프트웨어 산업 사회에서 프로젝트의 품질과 생산성을 높이는 문제에 대한 여러 가지 방안들을 제시하고 있으며, 컴포넌트 기반 개발 프로세스 역시 생산성 향상에 대한 가능성을 제시하고 있다. 하지만 고객 니즈에 맞는 고품질의 프로젝트를 수행하기 위해서는 체계적인 관리 프로세스가 필요하며 더욱이 컴포넌트 호환 및 상호 운용에 대한 문제점을 해결하기 위한 많은 노력이 필요하다. 본 논문에서는 이러한 문제점들을 해결하기 위한 노력들 중의 하나로 Six Sigma와 OMG의 MDA(Model Driven Architecture) 기술을 이용하여 특정 도메인의 모델 변환(Model Transformation) 구조를 구현하고, 최적화된 Six Sigma관리 프로세스를 적용한 실제 사례를 통하여 프로젝트의 품질과 생산성 망상에 대한 결과를 측정하여 그 효과에 대해서 검증하였다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.827-831
• /
• 2007

For applying simulation to the construction process, much effort is needed to collect input data and to build the model including the characteristics of site. This study introduces the methodology to collect operation data of construction equipment and build the simulation model, then verifies the model with the operation data. In addition, this study identifies main factors to determine the cycle time of the muck hauling system and offers reasonable decision making data using the simulation based planning of construction equipment operation.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.608-611
• /
• 2004

Efficiency of the construction process is one of the most important factors to project success. However efficiency is not well defined or measured in construction projects in general. More importantly, efficiency of the construction should be viewed through the life-cycle of the whole production system not in a single phase of the construction process. Therefore, this study defines the concept of efficiency and suggests the efficiency measurement model in construction. As a case study, the suggested model was applied to the curtain wall construction process of the high rise buildings as well.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1289-1298
• /
• 2014

Pavement crack sealing method, which is one of the methods to maintain and repair the road, prevents the extending of cracks by repairing cracks in its early occurrence and has already been applied to many roadworks in advanced foreign country for a long time. But in the conventional crack sealing method, traffic accidents occur frequently during the repair because it's commonly performed on the heavy traffic road or highway. It also has some difficulties in securing the safety of workers from the risk of burns caused by heated sealant. In an effort to solve these problems, automated pavement crack sealing machines such as ARMM, OCCSM, TTLS have been developed in advanced foreign country since early 1990s. Also APCS in 2004 and ACSTM in 2013 were already developed domestically. However, since these automated crack sealers developed from a number of research institutions have different test-bed conditions and productivity measurement models, it's difficult to compare and evaluate them objectively. In this study, the image processing time of the respective machines and the movement time of each motion on the work process were estimated by using fully autonomous mapping and semi-automatic mapping in order to measure the productivity in the same environmental conditions. In addition, the productivity measurement test-bed reflected domestic road characteristics was designed to estimate and compare the productivity of the automated crack sealing machines.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.197-200
• /
• 1997

Each company is more interested in the productivity to achieve cost reduction and profit maximization through productivity improvement. With this trend, we show the method to measure productivity using TPM(Total Productivity Model) which considers all the input factors of the company instead of using partial productivity such as labor and/or capital productivity We also examine the relation of productivity versus output, profit versus output and profit versus productivity of the case company by actually applying the TPM and suggest the optimal level of profit and output for this company.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.155-159
• /
• 2007

S/W 개발 프로젝트의 품질, 비용, 개발 기간을 잘 관리하여 프로젝트를 성공시키기 위해 PM 은 프로젝트의 종료시점과 예산의 초과를 예측할 수 있어야 한다. PMBOK 의 비용관리의 Earned Value Method 는 프로젝트의 진행에 따른 생산성의 변화와 그에 따른 비용과 일정의 증가 추정에 대한 규칙을 제시한다. 그러나 EVM 은 제조공정에서는 그 효과를 증명하였지만, S/W 프로젝트에서는 적용이 힘들어 잘 활용되고 있지 않다. 이는 사람이 주요 자원인 S/W 프로젝트에서는 Actual Cost 의 측정이 쉽지 않기 때문이다. 따라서 본 논문에서는 S/W 프로젝트 관리에서 Earned Value 의 측정이 쉽지 않아 추정되기 힘든 지연된 종료 시점에 대한 예측을 PMBOK 과 CMMI 에서 제시하는 관리 영역과의 연관성을 활용하고, EVM 을 보완하여 지연에 대한 예측모델을 만들어보고자 한다.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.97-108
• /
• 2024

This research delves into the escalating concerns of accidents and fatalities in the construction industry over the recent five-year period, focusing on the development of a Safety Perception Model to augment safety measures. Given the rising percentage of elderly workers and the concurrent drop in productivity within the sector, there is a pronounced need for leveraging Fourth Industrial Revolution technologies to bolster safety protocols. The study comprises an in-depth analysis of statistical data regarding construction-related fatalities, aiming to shed light on prevailing safety challenges. Central to this investigation is the formulation of a Safety Perception Model tailored for small-scale construction projects. This model facilitates the quantification of safety risks by evaluating safety grades across construction sites. Utilizing the DWM1000 module, among an array of wireless communication technologies, the model enables the real-time tracking of worker locations and the assessment of safety levels on-site. Furthermore, the deployment of a safety management system allows for the evaluation of risk levels associated with individual workers. Aggregating these data points, the Safety Climate Index(SCLI) is calculated to depict the daily, weekly, and monthly safety climate of the site, thereby offering insights into the effectiveness of implemented safety measures and identifying areas for continuous improvement. This study is anticipated to significantly contribute to the systematic enhancement of safety and the prevention of accidents on construction sites, fostering an environment of improved productivity and strengthened safety culture through the application of the Safety Perception Model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.499-503
• /
• 1995

VTR은 생산체제에 있었서 대량생산방식을 채택하는 전형적인 제품으로서 그 기구부와 회로부의 설계 및 해석에 관하여 많은 연구가 수행되어왔다. 본 연구에서는 조정공정의 자동화를 위하여 헤드드럼에서의 테이프 변형을 결정하는 요소 p2, p3 포스트의 조정에 관한 연구가 수행되었다. 테이프의 변형을 측정하기 위해서 먼저 테이프 변형의 단순화된 모델이 제안되었으며 영상헤드에 의해 읽혀지는 RF 신호로 부터 테이프의 변형을 측정하는 방법과 테이프 변형으로 부터 p2, p3 포스트의 오조정량을 찾는 신경외로망을 이용한 역모델이 개발되었다.