• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.89-96
• /
• 2020

Water management agencies under the Ministry of Environment produce and accumulate qualified basic data for major rivers. However, the integrated management of the river water has been weak since the artificial water circulation process, such as the intaking and drainage of agricultural water, has not been examined in the basin, which includes many agricultural land. In this study, a study was conducted on how the power usage method (operating time method) based on the running time can be applied and improved among indirect flow rate measurement methods used to investigate flow rates collected by the riverside for agricultural water purposes, and thus the resultant data of high reliability can be obtained at low cost. The operation time method is suitable for small-scale water pumping stations where it is difficult to secure real-time power supply data. The reliability of the data was verified through the correlation analysis with the actual flow rate, and it was found that the flow rate calculated by the operation time method reflecting the level of the stream to which the inlet of the pumping station is connected can be reasonably matched with the actual flow rate. In addition, it was confirmed that the investment cost at the time of initial installation of the facility was highly efficient by generating qualified flow data at low cost through comparison with direct flow rate measurement methods. If flow data is secured by applying the operation time method to large and small water farms located along the riverside, it is expected that more quantitative and integrated stream water management will be possible.

• International Commerce and Information Review
• /
• v.2 no.1
• /
• pp.129-148
• /
• 2000

지적재산권은 기술개발의욕 자극을 위해 새로이 물건이나 사상 등의 창작자에게 일종의 배타적 독점권을 부여한 것으로서 1980년대 이후 국제적 관심이 고조되기 시작하였는데, 두 차례의 석유파동 이후 기술이 국제 경쟁력의 주요 결정요인으로 등장하던 시기에 한국을 비롯한 개도국들이 선진국의 기술을 모방하여 첨단기술제품 분야에서 경쟁적 우위를 확보하자 자신들의 경쟁력 확보를 위해 선진국들이 자신들의 통상교섭력을 바탕으로 GATT/UR 등 국제적 협상을 통해 지적재산권 보호문제를 통상문제로 확대시킨 것이다. 이러한 지적재산권에 대한 통상문제와 관련하여 가장 문제가 되는 국가는 역시 미국인데, 미국은 통상법 301조 중 지적재산권 보호에 적용되는 Special 301조를 이용하여 지적재산권 보호에 대한 실효성을 확보하였으며, 당초 제품수입상의 불공정거래행위에 적용하던 관세법 337조를 지적재산권을 침해하는 수입 판매행위에도 적용할 수 있도록 개정함으로써 그 보호수단을 더욱 강화하였는데, 이에 따라 우리도 적절한 대응방안의 모색이 요구되고 있다. 우선 정부의 입장에서는 대내적으로 원천기술 및 개량기술 개발을 통한 기술의 해외의존도 축소, 인센티브 도입 등 직무발명제도 활성화, 해외특허권 취득확대를 위한 중소기업의 해외출원비용 지원, 심사관의 전문화롤 통한 심사의 처리속도 및 질 향상, 특허기술정보 이용체제 개선을 위한 특허청의 정보전산화 및 산업기술정보원 톡허정보센타와의 유기적인 협조체제 구축, 기업의 특허분쟁대응능력 향상을 위한 전담부서 마련 및 국제특허분쟁 전문변리사 양성 등의 대안을 마련할 필요가 있으며, 대외적으로는 PLT협약 등 차후에 있을 국제협약에의 적극적인 참여를 통한 우리나라의 이익도모, 남북 가교역할의 강화 및 한 미 양국간의 법제적 차이에 대한 오해불식, 해당 산업에 영향을 줄 수 있는 로비 활동의 활성화 등의 대안이 필요하다. 또한 기업의 입장에서는 사전적으로 과감한 연구개발투자를 통한 산업재산권 확보, 기술 법률 언어능력을 고루 갖춘 특허전문가의 확보, 국제특허분쟁에 대한 대응체계 구축, 특허권 분쟁발생 방지를 위한 책임소재의 명확화 등의 근본적인 대책과 국제특허분쟁 차단을 위한 철저한 선행기술 조사, 해외기술의 개량 및 이용 촉진을 위한 크로스-라이센스의 활성화, 부실특허권에 대한 적극적인 무효심판청구, 제소정보에 대한 조기 입수, 설계변경이나 특허무효자료조사 등 침해회피 방법의 준비, 위험특허에 대한 철저한 예비조사 등의 부수적인 대책을 마련할 필요가 있으며, 일단 특허분쟁이 발생한 경우에는 당해 분쟁의 자사 생산 제품과의 관련여부 검토, 사건에 필요한 광범위한 정보 수집을 위한 전담팀 구성, 제소인의 특허권에 대한 면밀한 법률적 검토, 제소자에 대한 정확한 정보파악 및 최종 대응방안에 대한 신속한 결정, 자사의 특허를 이용한 제소자에 대한 역제소 등의 대응방안을 강구할 필요가 있는 것이다.

• Journal of Korea Port Economic Association
• /
• v.36 no.2
• /
• pp.87-108
• /
• 2020

The Korean logistics industry has grown with the development of domestic industries. The industry plays an important role in national and regional economic growth, and the government has continued policy efforts to foster the industry. This study analyzes the competitiveness of the regional logistics industry and its contribution to the regional economy. Location coefficients are used to analyze local specialization in each logistics industry. The value-added rate, GDP contribution, value-added induction coefficient, and net value-added income of regional logistics industries are analyzed using a regional input-output table. As a result, the logistics industry is found to have net value-added income and competitiveness in some regions, and there is no relationship between the location coefficient and the value-added contribution of the regional logistics industry. Seoul, Incheon, Gyeonggi, Busan, and Jeju have the competitiveness of each logistics industry. In addition, we identified the regions where the logistics infrastructure is well developed and those in which it needs to be supported. The regions where the logistics industry has developed require policies for making high value-added by logistics activity, and regions with insufficient growth need to support the development of the logistics industry by investing human resources and capital that can meet the local demand.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.31-43
• /
• 2017

This study was aimed at analyzing the operational efficiency of DPAs(the delivery and pickup agents), which serve as sub-terminals in parcel delivery services, using CCR/BCC models in DEA. The input variables included the number of employees, and the amount of equipment and the operating expenses. The output variable was revenue value. The efficiency for the period from 2014 to 2016 was analyzed. The results revealed that the operational efficiency improved in 2016, compared with 2014, in both CCR and BCC models. According to the benchmarking analysis, DMU 1 and DMU 7 showed higher efficiency in 2016. The inefficiency analysis based on the BCC model showed increased efficiency of all factors in 2016 when compared with 2014. The Malmquist productivity index (MPI) dropped slightly as a result of technical changes and indicated a declining technical efficiency in all DMUs. This study suggests the need for government-led systematic improvement and support for DPAs by providing current insight into the parcel delivery industry and analyzing DPAs' operational efficiency in Korea for the first time. This research performed efficiency analysis of DPAs located in new town of paju and gimpo cities. In future research, comparative study on efficiency analysis including new town, old town area, and other cities are needed.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.15-19
• /
• 2015

We demonstrated an inspection system for detecting discoloration of PCB Cu ball pad with an OSP surface finish. Though the OSP surface finish has many advantages such as eco-friendly and low cost, however, it often shows a discoloration phenomenon due to a heating process. In this study, the discoloration was analyzed with device-independent CIELAB color space. First of all, the PCB samples were inspected with standard lamps and CCD camera. The measured data was processed with Labview program for detecting discoloration of Cu ball pad. From the original PCB sample image, the localized Cu ball pad image was selected to reduce the image size by the binarization and edge detection processes and it was also converted to device-independent CIELAB color space using $3{\times}3$ conversion matrix. Both acquisition time and false acceptance rate were significantly reduced with this proposed inspection system. In addition, $L^*$ and $b^*$ values of CIELAB color space were suitable for inspection of discoloration of Cu ball pad.

• Clean Technology
• /
• v.17 no.2
• /
• pp.85-96
• /
• 2011

Self-healing materials are a class of smart materials that have the structurally incorporated ability to repair damage caused by mechanical usage over time. A material (polymers, ceramics, metals, etc.) that can intrinsically correct damage caused by normal usage could lower production costs of a number of different industrial processes through longer part lifetime, reduction of inefficiency over time caused by degradation, as well as prevent costs incurred by material failure. The recent announcement from Nissan on the commercial release of scratch healing paints for use on car bodies has gained public interest on such a wonderful property of materials. This article is a second part of healing materials dealing with inorganic engineering materials such as metals, ceramics, and concrete. The healing mechanisms developed for the inorganic materials are to be discussed with the future prospect.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.4
• /
• pp.149-159
• /
• 1996

Recent advances in material technology has accelerated the development of higher strength concretes using lightweight manufactured aggregates.Concretes with these chnractcristics are designable since the reductiun of dead loads and the increase in load capacity can oflix substantial cost reductions. Alt,hough thesc rharackristics are very desirable, very little information is availablc to the structural rivic;~~,cher about the properties of highstrength lightweight concrete. In general, shear strength of reinforced concrete beams is dependent on the compressive strength of concrete. the longitudinal steel ratio, the shear span to the depth ratio and shear reinforcement. In this study. eight single reinforced high strength lightweight concrete beams were tested to investigate their behavior and to determine their ultimate shear strengths.The variables studied in this investigation are shear span to effective depth ratio a/d = 1.5. 2.5, 3.5 and 4.5 : vertical shear reinforcement ratio ${\rho}_8= 0%$ and 1.136%. Test results were analyzed and compared with strengths predicted by ACI code equation. Zsutty's equation. As the results, ACI Eq.(ll-3) and ACI Eq.(ll-6) are conservative for high strength lightweight concrete beam. Also Zsuttyrs Eq. is conservative for beams except short beams. (a/d= 1.5)

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.324-332
• /
• 2012

The purpose of this study was to evaluate the effects of container types on seedling growth of Betula costata, Liriodendron tulipifera, Fraxinus rhynchophylla, Fraxinus mandshurica, Zelkova serrata, and Ulmus parvifolia in the container nursery system. We used three container types [20 cavities (150 seedlings/$m^2$-400 mL), 24 cavities (200 seedlings/$m^2$-320 mL), and 35 cavities (260 seedlings/$m^2$-240 mL)] and measured root collar diameter (RCD), height, biomass, seedling quality index (SQI), and root density. The root collar diameter, height, biomass, SQI, and root density of seedlings were the highest at 20 cavities/tray in all six species because this container type has the largest volume and lowest seedling density. However, F. rhynchophylla growth at both 20 and 24 cavities/tray, Z. serrata growth at both 24 and 35 cavities/tray and B. costata growth at all sizes were not significantly different. As expected, container volume was positively correlated with RCD, height, and biomass of five species except for Z. serrata, but seedling density negatively did. Based on these results, 20 cavities/tray are optimal for L. tulipifera, F. mandshurica, and U. parvifolia, 20 or 24 cavities/tray for F. rhynchophylla, 24 or 35 cavities/tray for Z. serrata, and 35 cavities/tray for B. costata, respectively. Usage of optimal container will make us get good quality seedlings as well as reduction of production costs in the container nursery.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.3-12
• /
• 2011

Technology based civilization has made a sustained advancement, resulting in economic growth and material prosperity. The outcome was the beginning of environmental destruction. Especially, in regard to construction, it has been recognized as a key culprit for pollution. As such, the construction industry has recently shown interest in the environment, as it has been applying environment friendly method of construction and reducing wastes. As the number of old common housing increases in our country, reconstruction and remodeling are implemented as a means of improvement. However, it can be said that remodeling is the inevitable option because of cost and environmental problems associated with reconstruction. As part of its feature, remodeling work is preceded by removal work. And, removal work inevitably creates construction wastes. Treatment of wastes that takes into consideration environmental aspects is important and for this, removal work that is based on environment friendly remodeling to ensure selective separation must be implemented. Yet, a removal work based on environment friendly remodeling has a lower level of output compared to existing methods. Because remodeling work by its nature has a post construction work which proceeds after it, securing work efficiency is important as the removal work is a critical path activity. Thus, the present study improves the work process of a removal work that is based on environment friendly remodeling so that it becomes a work process that includes work efficiency. For this, as a case study, old common housing has been selected, and a TACT process has been developed which is based on data acquired from environment friendly removal work. And, this study develops an optimal TACT process which is based on environment friendly remodeling by conducting a simulation for a 15 floor apartment.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.45-53
• /
• 2010

When increasing quantity of construction wastes, how to deal with construction wastes and environmental problems relating to disposal of construction wastes are discussed as social issues, treatment of construction waste and subsidiary issues are raised as important problems. The demolition work produce construction wastes most in construction industry. Various researches on eco-friendly treatment of construction wastes, recycling rates and recycled materials were conducted aspect of sustainability in developed countries, however, domestic remodeling projects were performed demolition work with first-demolition and second-classification method which emphasize productivity focused on efficiency. It caused not only environmental problems, but also economical problems such as increasing disposal cost of construction wastes. Solving these problems, the previous study, suggested the process model of eco-friendly demolition work to recycle materials. This paper applied eco-friendly remodeling process to practical projects and economic feasibility on eco-friendly remodeling process. Moreover these results expect to contribute the revitalization of eco-friendly demolition work in remodeling projects.