• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.177-181
• /
• 2017

Dose response curves using absorbed dose to the biological effect are usually available in case of conventional X beam. However, absorbed dose is not consider in treatment planning for carbon beam such as heavy ions. Because the biological effects also depend on other quantities such as the local variation, which is often characterized by the linear energy transfer (LET). So LQ model cannot explain the entire response of fractionated carbon beam irradiation. The variation in LET with penetration depth leads to substantial differences in biological effect of carbon beam. And it is therefore essential in treatment planning to calculate not only the absorbed dose but also the LET to estimate the biological outcome of the radiation of interest. LET variation plays an important role in the fractionated irradiations. It is suggested that consideration of LET is necessary in biophysical model.

• Journal of the Korean Society of Radiology
• /
• v.9 no.6
• /
• pp.417-420
• /
• 2015

We obtained Surviving Fraction (SF) after irradiation carbon beam to compare the applicability of the Linear-Quadratic model, Incomplete Repair model, Marchese model. Mathematica software(ver 9.0) used to calcurate parameters and compared result. LQ model could not explain the entire response of fractionated carbon beam irradiation. It becomes necessary to construct models that extend the LQ model of conventional radiotherapy for the carbon beam therapy. By combining both Potentially Lethal Damage Repair (PLDR) and Sublethal Damage Repair (SLDR) a new LQ model can develop that aptly modeled the cellular response to fractionated irradiation.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.263-274
• /
• 2014

펩타이드 중합체의 이차 구조는 화학적, 생물학적 기능을 갖는 단백질 삼차 구조를 결정하는 중요한 구성요소이다. 이러한 단백질의 이차구조에 대한 정보는 치매, 광우병과 같은 단백질 응집관련 질병에서 응집유발 단백질의 형성과정 및 안정도와 밀접한 연관이 있다. 본 연구는 폴리알라닌을 모델 펩타이드로 선택하여, 이들의 가능한 7가지 이차구조들에 대한 구조적, 열역학적 특성을 계산화학방법을 통해 비교 분석하였다. 우선 기체상에서 7가지 구조들의 구조최적화를 통해 상대적 안정도를 비교하였고, 나아가 EDISON의 용매화 자유 에너지의 열역학적 계산방법을 통해 수용액상에서의 상대적인 안정도와 그 원인을 비교, 분석하였다. 특히, 기체상에서와 수용액상애서 폴리알라닌 이차구조들의 상대적 안정도가 바뀌는 원인에 대해, 폴리알라닌의 구조적 특징과 수소결합과의 상관관계를 통해 규명하였다. 본 연구에서 밝힌 단백질 이차 구조의 상대적 안정도 및 물과의 상관관계에 미치는 구조적, 열역학적 원인은 응집 유발 단백질에서 제시된 특정 이차 구조의 선택적 안정성에 대한 근거를 제시하며, 그 기작을 이해하는 중요한 단서를 제공한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.39-39
• /
• 2018

최근 플라즈마 의학이 발달하면서 제트, 펜, 니들, 토치 등의 다양한 형태의 플라즈마 발생기가 개발되었으며 내부의 가스라인으로 가스의 종류, 유속, 조성 등을 조절하여 생물학적 효과를 극대화 할 수 있고 안정적으로 플라즈마 방전상태를 유지할 수 있으나 처리 면적이 좁아 실제 생물학적 시스템 (세포, 조직, 그리고 박테리아) 적용에 있어 한계점이 존재한다. 이러한 한계점을 극복하기 위해서 유전체격벽방전 (Dielectric barrier discharge, DBD) 방식을 이용한 플렉서블 활성종 발생기를 제작하고 생물학적 시스템에 적용하기 위한 방전 특성 평가를 진행하였으며, 간단한 in vitro 모델인 한천 젤을 이용하여 플라즈마 처리에 따른 전달물질의 침투거리를 확인하였다. 플라즈마 방전 시 생성되는 수산화기 [OH], 과산화수소 [$H_2O_2$], 초산소음이온 [$O_2{^-}$], 오존 [$O_3$], 그리고 산화질소 [$NO_x$]와 같은 산소 및 질소 활성종 (Reactive oxygen and nitrogen species, RONS)은 세포벽 또는 세포막의 주요 구성성분인 다당류와 인지질의 과산화 반응을 통해 구조를 변화시키고 생물학적 시스템의 표면의 pH를 낮춘다. 이러한 RONS의 작용은 살균, 소독 뿐만 아니라 약물의 침투를 돕는다. 일반적으로 한천 겔은 농도에 따라 생체 내 뇌 조직과 물리적 특성이 유사하고, 미생물학 기질, 방사선학 연구를 위한 조직모델로 사용되기 때문에 본 연구에서는 3%와 5% 농도의 한천 젤을 사용하여 침투거리를 확인하였다. 한천 젤은 $2.5{\times}2.5{\times}2.5cm^3$의 크기로 준비되었고 대조군으로 염료가 포함된 에멀젼을 0.01 g 도포하고, 실온에서 30분간 보존 후 단면을 잘라 현미경으로 침투거리를 확인하였으며, 실험군으로 플라즈마 전처리 후 에멀젼을 도포한 시표와 에멀젼 도포 후 플라즈마 처리한 시료에 대해 에멀젼 침투거리의 변화를 확인하였다. 본 연구의 플렉서블 활성종 발생기는 인체에 부착하여 사용되기 때문에 화상, 홍반을 유발을 방지하기위해 $40^{\circ}C$의 온도에서 실험을 진행하였고 이때에 플라즈마 방전조건은 $0.065W/cm^2$ 수준의 전력을 소모하는 1.7 kV의 전압, 16 kHz의 주파수로 10분간 처리하였다. 그 결과 3%의 한천 젤의 경우 침투거리 0.779 mm에서 0.826 mm, 0.942 mm까지 침투거리가 증가하였고 5%의 한천 젤의 경우 0.859 mm, 0.949 mm로 증가하였다. 이러한 침투거리 증가는 젤 표면의 다당류를 구성하고 있는 단량체가 플라즈마 처리시 화확적 구조가 끊어져 결론적으로 약물 침투가 증가된 것으로 판단된다.

• The KIPS Transactions:PartB
• /
• v.15B no.5
• /
• pp.477-486
• /
• 2008

Facial expression, which changes face geometry, usually has an adverse effect on the performance of a face recognition system. To improve the face recognition rate, we propose a normalization method of facial expression to diminish the difference of facial expression between probe and gallery faces. Two approaches are used to facial expression modeling and normalization from single still images using a generic facial muscle model without the need of large image databases. The first approach estimates the geometry parameters of linear muscle models to obtain a biologically inspired model of the facial expression which may be changed intuitively afterwards. The second approach uses RBF(Radial Basis Function) based interpolation and warping to normalize the facial muscle model as unexpressed face according to the given expression. As a preprocessing stage for face recognition, these approach could achieve significantly higher recognition rates than in the un-normalized case based on the eigenface approach, local binary patterns and a grey-scale correlation measure.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.11a
• /
• pp.81-90
• /
• 1994

리포좀은 1960년대 초 Bangham등에 의해 혈액응고시 인지질의 영향에 관한 연구 중 우연히 발견하게 되었다. 즉 인지질이 물에 분산되어 2 분자막 (Bilayer)을 형성함을 알았고, 이때 생긴 폐쇄소포체를 리포좀이라 하였다. 이러한 리포좀은 원형질 막이나 세포내의 소기관의 막과 유사한 구조를 갖고 있기 때문에 이것을 이용하여 생화학자나 생물리학자들은 생체막의 모델시스템으로 이용하여 생체막의 기능 연구에 널리 이용하여 왔다. 1970년 초반부터 리포좀을 이용한 약물의 생체내 공급(Drug Delivery System, DDS)에 대하여 많은 연구가 이루어져 왔고, 지금까지도 의약품외 전달매체로 이용할려고 많은 시도를 하고 있는 실정이다. 최근에는 리포좀을 이용하여 항원을 전달하는 면역보조제(Adjuvant System)로 이용하려는 시도를 하고 있다. 현재까지 리포좀을 이용한 상품들은 화장품과 임상용 진단시 약, DNA transfection system (Lipopectin)으로 활용되고 있다.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.291-307
• /
• 2001

In today's environmental engineering practice, many technologies such as GIS have been adopted to analyze chemical and biological process in water bodies and pollutants movements on the land surface. However, the linkage between spatially represented land surface pollutants and the in-stream processes has been relatively weak. This lack of continuity needs to develop a method in order to link the spatially-based pollutant source characterization with the water quality modeling. The objective of this thesis was to develop a two-way(forward and backward) link between ArcView GIS software and the USEPA water quality model, WASP5. This thesis includes a literature review, the determination of the point source and non-point source loadings from WASP5 modeling, and the linkage of a GIS with WASP5 model. The GIS and model linkage includes pre-processing of the input data within a GIS to provide necessary information for running a model in the forms of external input files. The model results has been post-processed and stored in the GIS database to be reviewed in a user defined form such as a chart, or a table. The interface developed from this study would provide efficient environment to support the easier decision making form water quality management.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.282-290
• /
• 2013

Biophysical and biochemical processes through which crops interact with the atmosphere have been simulated using land surface models and crop growth models. The Noah Multi Physics (MP) model and the CERES-Rice model, which are a land surface model, and a crop growth model, respectively, were used to simulate and compare rice growth and evapotranspiration (ET) in the areas near Haenam flux tower in Korea. Simulations using these models were performed from 2003 to 2012 during which flux measurements were obtained at the Haenam site. The Noah MP model failed to simulate the pattern of temporal change in leaf area index (LAI) after heading. The simulated aboveground biomass with the Noah MP model was underestimated by about 10% of the actual biomass. The ET simulated with the Noah MP model was as low as 21% of those with the CERES-Rice model. In comparison with actual ET measured at Haenam flux site, the root mean square error (RMSE) of the Noah MP model was 1.8 times larger than that of the CERES-Rice model. The Noah MP model seems to show less reliable simulation of crop growth and ET due to simplified phenology processes and assimilates partitioning compared with the CERES-Rice model. When ET was adjusted by the ratio between leaf biomass simulated using CERES-Rice model and Noah MP model, however, the RMSE of ET was reduced by 30%. This suggests that an improvement of the Noah MP model in representing rice growth in paddy fields would allow more reliable simulation of matter and energy fluxes.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.533-542
• /
• 2006

Lidar point clouds provide three dimensional information of terrain surface and have a great advantage to generate precise digital elevation model (DEM), particularly over forested area where some laser signals are transmitted to vegetation canopy and reflected from the bare ground. This study initially investigates the characteristics of lidar-derived height information as related to vertical structure of forest stands. Then, we propose a new filtering method to separate ground points from Lidar point clouds, which is a prerequisite process both to generate DEM surface and to extract biophysical information of forest stands. Laser points clouds over the forest stands in central Korea show that the vertical distribution of laser points greatly varies by the stand characteristics. Based on the characteristics, the proposed filtering method processes first and last returns simultaneously without setting any threshold value. The ground points separated by the proposed method are used to generate digital elevation model, furthermore, the result provides the possibilities to extract other biophysical characteristics of forest.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.3
• /
• pp.77-86
• /
• 2010

In this study, the model of the indirect wind suction waste sorting machine for characteristics of the screening of waste was studied using computational fluid dynamics and the drag coefficient for the model and the suction wind speed were obtained. The wind separator are developing by installing a cyclone air outlet to the suction blower impeller waste is selective in a way that does not pass the features and characteristics of the inlet pipe of the pressure loss and separation efficiency can have a significant impact on. Using Wind separator for selection of waste in the waste prior research on the aerodynamic properties are essential. For plastic cases, it is reasonable to take the drag coefficient between 0.8 and 1.0, and for cans, compression depending on whether the cans, the drag coefficient is in the range from 0.2 to 0.7. The separation efficiency of waste as change suction speed was the highest efficiency when the suction speed was 25~26 m/s. Shape of the inlet, depending on how the transfer pipe of the duct pressure loss occurs because the inlet velocity changes through the appropriate design standards to allow for continued research is needed.