• KSBB Journal
• /
• v.18 no.6
• /
• pp.529-535
• /
• 2003

We studied degradation effects of hydrophobic substrate such as kerosene and diesel by adding a biosurfactant originated from Pseudomonas aeruginosa F722 and chemical surfactants (Tween 80 and detergent) with aeration. The surface tensions of the biosurfactant, Tween 80 and detergent were 30mN/m, 39mN/m and 31mN/m, respectively. When the concentration of biosurfactant added in C-medium was 0.01 and 0.15%(w/v), the ratios of hydrocarbon degradation were 94.3％ and 94.2% respectively. It was 6.2%(w/v) higher than when the concentrations of added biosurfactant were 0.05, 0.1 and 0.2％. The degradation ratios of the chemical surfactants (Tween 80 and detergent) were 94.5％ and 93.5％ respectively. The effects of the biosurfactant and chemical surfactants were similar on the degradation ratio in mixtures of kerosene and diesel. However, the population of viable p. aeruginosa F722 at the end of the cultivation period was twice as higher in the biosurfactant than that in the chemical surfactant. We also studied the effect of aeration (0.5vvm) on the degradation ratio. The biosurfactant addition experiment was conducted with 0.5vvm air, 35$^{\circ}C$, 150rpm, pH 8.0, 3days, 1.0% (w/v) substrate. When p. aeruginosa F722 and 0.15%(w/v) biosurfactant were added, the degradation ratio of hydrocarbon was 94.8％. Without p. aeruginosa F722, it was 68%. Thus, with aeration, the degradation ratio of hydrocarbon was increased by 26.8％. In addition, the cultivation time was shortened by 1/3. The degradation ratios of hydrocarbon in shaking culture (cultivation time; 3days) and stationary culture (cultivation time; 10days) were 94.8 and 93.7％ respectively. Thus, the addition of biosurfactant and aeration enhanced the degradation of hydrocarbon originated kerosene and diesel.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.120-123
• /
• 1997

오염토양 복원의 신기술로서 미생물계면활성제를 이용한 생물학적 정화법(Bioremediation)의 표준화된 절차와 현장적용 결과를 제시하였다. 적절한 양분과 수분 그리고 산소를 공급하여 유류 오염물질의 생물학적 제거효율을 극대화시킬 수 있었으며 특히 유류오염물질을 효과적으로 분산시키기 위해 미생물계면활성제를 사용함으로써 오염된 토양을 단기간 내에 복원하는데 상당히 효과적인 기술임을 확인 할 수 있었으며 지속적인 현장적용 기술의 개발을 통하여 국내외적으로 당면하고 있는 토양오염문제를 해결하는데 크게 이바지 할 수 있을 것으로 사료된다.

• Journal of Applied Biological Chemistry
• /
• v.58 no.1
• /
• pp.81-88
• /
• 2015

To characterize the culture medium for the biosurfactant production by Bacillus pumilus IJ-1, the influences of various carbon, nitrogen and mineral sources were assessed. As a result, the highest biosurfactant production was observed after 96 h cultivation containing 0.5% (w/v) tryptone. The strain was able to grow and produce biosurfactant at 0-10% (w/v) NaCl, in the pH range of 5-10, and at $20-45^{\circ}C$. Optimal culture conditions for the biosurfactant production were at $20^{\circ}C$ and pH 9.0 after 72 h incubation and the surface tension of biosurfactant was 27.0 dyne/cm.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.44-54
• /
• 2003

A kinetic model for evaluating effects of surfactant on the biodegradation of HOC(hazardous organic chemicals) in soil-slurry systems was developed. The model includes the partition of HOC and surfactant, the dissolved-, micellar-, and sorbed-phase biodegradation, the enhanced solubilization of HOC by surfactant addition, and the mass transfer of HOC. Phenanthrene as HOC and Trition X-100, Tergitol NP-10, Igepal CA-720, and Brij 30 were used in the model simulations. The biodegradation rate was increased even with a small micellera-phase bioavailability. The biodegradation was not greatly enhanced due to decreased aqueous HOC concentration by increasing surfactant dose in both cases with and without micellar-phase bioavailability. The effect of sorbed-phase biodegradation on total biodegradation rate was not highly important compared to aqueous- and micellar-phase biodegradation. The model can be applied for surfactant screening and optimal design of surfactant-based soil bioremediation process.

• Journal of Applied Biological Chemistry
• /
• v.54 no.3
• /
• pp.153-158
• /
• 2011

Optimal culture conditions were characterized for production of crude biosurfactant of Bacillus subtilis JK-1. During incubation of B. subtilis JK-1, the bacterial growth pattern, changes of the surface tension at variable temperatures, pH and NaCl concentrations in bacterial culture medium were studied. The strain was able to grow and produce biosurfactant at $15-45^{\circ}C$, in the pH range of 6-10, and at 0-10% (w/v) NaCl. In case, culture broth pH was gradually changed to neutral or weak alkaline. Optimal culture conditions for crude biosurfactant production were at $35^{\circ}C$ and pH 7.0 after 48 h incubation and the surface tension of biosurfactant was 24.0 mN/m. Besides, as the concentration of NaCl was increased from 0 to 10% (w/v), the growth was decreased, pH of the culture broth was converted from weak alkaline to acidic, and the surface tension rised.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.260-267
• /
• 2021

In this study, a carboxylate-based anionic surfactant SLEC-3 was prepared from coconut oil and the structure was elucidated by using FT-IR, ¹H-NMR and ¹³C-NMR analysis. Measurements of interfacial properties such as critical micelle concentration, static and dynamic surface tensions, emulsification index, and foam stability have shown that SLEC-3 is better in terms of interfacial activity and more effective in lowering interfacial free energy than those of SLES, which has been widely used as a conventional anionic surfactant in the detergent industry. Biodegradability, acute oral toxicity and dermal irritation tests also revealed that SLEC-3 surfactant possesses excellent mildness and low toxicity, indicating the potential applicability in detergents and cleaner products formulation.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.416-422
• /
• 2011

In this study, the effect of cosurfactant on the phase equilibrium and dynamic behavior was studied in systems containing NP7 nonionic surfactant solutions and nonpolar hydrocarbon oils. All cosurfactants used during this study such as n-pentanol, n-octanol and n-decanol acted as a hydrophobic additive and thus promoted the transition from an oil in water (O/W) microemulsion (${\mu}E$) in equilibrium with an excess oil phase to a three-phase region containing excess water, excess oil, and a middle-phase microemulsion and further to a water in oil (W/O) ${\mu}E$ in equilibrium with the excess water phase. The transition temperature was found to decrease with both increases in the chain length and amount of addition of a cosurfactant. Dynamic behavior studies under O/W ${\mu}E$ conditions showed that an oil drop size decreased with time due to the solubilization into micelles. On the other hand, both the spontaneous emulsification of water into the oil phase and the expansion of oil drop were observed under W/O ${\mu}E$ conditions because of the diffusion of surfactant and water into the oil phase. Under conditions of a three-phase region including a middle-phase ${\mu}E$, both the rapid solubilization and emulsification of the oil into aqueous solutions were found mainly due to the existence of ultra-low interfacial tension. Dynamic interfacial tension measurements have been found to be in a good agreement with dynamic behavior results.

• Applied Chemistry for Engineering
• /
• v.35 no.3
• /
• pp.230-238
• /
• 2024

In the present work, the interaction of lipid-based zwitterionic surfactant CDP-W with the vesicle membrane of phospholipids was investigated. For this purpose, interfacial properties such as critical micelle concentration (CMC) and surface tension were measured for the zwitterionic surfactant CDP-W and lecithin S100-3. The zeta potential of 1 wt% aqueous surfactant solutions was also measured as a function of pH to determine the iso-electric point of CDP-W surfactant, where the characteristic of CDP-W surfactant changes from a cationic surfactant to an anionic surfactant. Based on the iso-electric point measurement of CDP-W surfactant, the effects of pH change and CDP-W addition on the stability of S100-3 liposome systems were studied, such as average particle size, polydispersity index (PDI), and zeta potential. The effect of CDP-W on the fluidity characteristics of liposome membranes such as fluorescence anisotropy ratio, deformability, and melting point was investigated at pH 6 where the most stable liposomes were prepared to understand the effect of the fluidity of the liposome membrane on the encapsulation efficiency of active materials and the stability of liposome systems.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.376-383
• /
• 2011

The CMCs of LA and LA3 nonionic surfactants obtained from the reaction between glycidol and lauryl alcohol were found to be $0.97{\times}10^{-3}mol/L$ and $1.02{\times}10^{-3}mol/L$ respectively and the surface tensions for 1 wt% surfactant were 26.99 and 27.48 mN/m respectively. Dynamic surface tension measurements using a maximum bubble pressure tensiometer showed that the adsorption rate of surfactant molecules at the interface between the air and the surfactant solution was found to be relatively fast in both surfactant systems, presumably due to the high mobility of surfactant molecules. The contact angles of LA and LA3 nonionic surfactants were 27.8 and $20.9^{\circ}$ respectively and the dynamic interfacial tension measurement by a spinning drop tensiometer showed that interfacial tensions at equilibrium condition in both systems were almost the same. Also both surfactant systems reached equilibrium in 2~3 min. Both surfactant solutions showed high stability when evaluated by conductometric method and the LA nonionic surfactant system provided the higher foam stability than the LA3 nonionic surfactant system. The phase behavior experiments showed a lower phase or oil in water (O/W) microemulsion in equilibrium with an excess oil phase at all temperatures studied. No three-phase region was observed including a middle-phase microemulsion or a lamellar liquid crystalline phase.

• KSBB Journal
• /
• v.22 no.1
• /
• pp.43-47
• /
• 2007

The effect of surfactant on the hydrolysis of used newspaper was investigated. The most suitable surfactant for the pretreatment stage was found to be NP-series surfactants among 9 kinds of non ionic surfactants. Process parameters such as surfactant concentration, mixing speed, pretreatment temperature and time were tested to optimize for maximum digestibility and 0.5%, 100rpm, 30$^{\circ}C$, and 1 h were found to be optimum, respectively. In order to maximize digestibility, substrate was pretreated with NP-20 and then the pretreated substrate was hydrolyzed by adding TW-80. The effect of surfactant on the hydrolysis of previously surfactant-pretreated newspaper was marginal. Therefore, the digestibility with the addition order of enzyme and surfactant was investigated by using surfactant only in hydrolysis stage. The results show that digestibility was more lowered as the surfactant addition after adding enzyme to substrate was more delayed.