• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.152-159
• /
• 2007

This paper describes the design, fabrication, and measurement of ROIC(ReadOut Integrated Circuit) for $320{\times}256$ IRFPA(InfraRed Focal Plane Array). A ROIC plays an important role that transfer photocurrent generated in a detector device to thermal image system. Recently, the high performance and low power ROIC adding various functions is being required. According to this requirement, the design of ROIC focuses on 7MHz or more pixel rate, low power dissipation, anti-blooming, multi-channel output mode, image reversal, various windowing, and frame CDS(Correlated Double Sampling). The designed ROIC was fabricated using $0.6{\mu}m$ double-poly triple-metal Si CMOS process. ROIC function factors work normally, and the power dissipation of ROIC is 33mW and 90.5mW at 7.5MHz pixel rate in the 1-channel and 4-channel operation, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.3009-3015
• /
• 2013

Next-generation sequencing (NGS) has enabled whole genome and transcriptome single nucleotide variant (SNV) discovery in cancer and method of the most fundamental being determining an individual's genotype from multiple aligned short read sequences at a position. Bayesian algorithm estimate parameter using posterior genotype probabilities and other method, EM algorithm, estimate parameter using maximum likelihood estimate method in observed data. Here, we propose a novel genotype-calling system and compare and analyze the effect of sample size(S = 50, 100 and 500) on posterior estimate of sequencing error rate, somatic mutation status and genotype probability. The result is that estimate applying Bayesian algorithm even for 50 of small sample size approached real parameter than estimate applying EM algorithm in small sample more accurately.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.656-659
• /
• 2012

In general, images captured by the color filter array are compressed after applying demosaicking process. Since this process introduces data redundancy which can reduce coding efficiency, several methods have been proposed to address this problem. While some conventional approachs convert color format to GBR or YUV 4:2:2 format, we propose to use the YCoCg 4:2:2 format to carry out compression. The proposed method shows an average bits reduction of 3.91% and PSNR increase of 0.04dB compared with H.264 YUV 4:2:0 intra-profile prediction method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.38-44
• /
• 2011

Because of the complexity of the underwater environment, the communication has difficulties that can differ significantly from those in air, The signal is degraded by many random noises. Furthermore, the limit of the bandwidth is a big issue in underwater communication. Therefore, the array signal processing can be adapted to improve the signal-to-noise ratio. In this paper, we propose a potential method for underwater communication based upon source tracking techniques. Also, a new tracking model by using a multi-array sonar and detail of the multi-array sonar configuration are shown in this paper. The experiment results demonstrated the receiver configuration is very potential to solve communication problems, especially in the underwater environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.1
• /
• pp.59-63
• /
• 2017

We present a multi-sample array device based on a pneumatic system. Solenoid valves were used to control a micro valve in a pneumatic system. The use of a compressor together with a vacuum pump ensured that one outlet could supply both compression and vacuum pressure. The multi-sample array device was fabricated using conventional photolithography and PDMS casting. The device was composed of a multiplexer, sample array, and rinsing. The multiplexer could control four sample solutions injecting into the sample array chamber. Sample solution not arrayed was removed by DI-water from the rinsing inlet. To prevent trapping of microbubbles in the channel during injection of sample solution into the device, surfactant was added in PDMS solution to serve as a hydrophilic surface treatment. As a result, the device could be used as a sample array for 64 cases, using four samples and three columns of three chambers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1223-1232
• /
• 2008

In this paper, an analytic method is proposed to extract the reference slot admittance required for the design of a non-resonant waveguide edge slot array. A slot and two neighboring transmission line sections of the numerous alternately inclined slots with the identical inclination angle are modelled as a uniform lossy transmission line, and thus, the total ABCD matrix is easily calculated and compared with the simulated or measured one. From this procedure, the complex characteristic impedance and the complex propagation constant of the lossy transmission line are calculated and the normalized slot admittance is analytically obtained. In order to validate the proposed method, the admittance value of a reference slotted waveguide fabricated for designing the X-band edge slot array is extracted and it is compared with the one obtained by the other conventional method.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.262-271
• /
• 2002

This study presents a practical procedure for the Bayesian inversion of geophysical data. We have applied geostatistical techniques for the acquisition of prior model information, then the Markov Chain Monte Carlo (MCMC) method was adopted to infer the characteristics of the marginal distributions of model parameters. For the Bayesian inversion of dipole-dipole array resistivity data, we have used the indicator kriging and simulation techniques to generate cumulative density functions from Schlumberger array resistivity data and well logging data, and obtained prior information by cokriging and simulations from covariogram models. The indicator approach makes it possible to incorporate non-parametric information into the probabilistic density function. We have also adopted the MCMC approach, based on Gibbs sampling, to examine the characteristics of a posteriori probability density function and the marginal distribution of each parameter.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.32-39
• /
• 2015

최근 펩티드를 포함한 다양한 물질들의 자기조립 (self-assembly) 나노구조체에 대한 연구들이 많이 진행되고 있다. 이는 이러한 분자들로 구성된 구조체들이 환경친화적이며, 생체 나노구조체를 묘사함을 통해 세포소기관의 기능 역시 모방할 수 있다고 기대되기 때문이다. 만약 분자 수준에서 자기조립을 형성하는 단위체를 살펴본다면 자기조립 나노 구조를 개발하는 방법에 대한 통찰을 얻을 수 있을 것이다. 본 연구에서는 최근에 Wen Li 그룹에서 개발한 쉽게 합성할 수 있는 자기조립 펩티드의 적합성을 분자 수준에서 규명하였다. 이를 위해 복제계-맞바꿈 분자 동역학 시뮬레이션 (replica exchange molecular dynamics simulation)을 통해 구조를 샘플링 (sampling)하였고, 얻어진 구조들을 평균 제곱근 편차 (root mean square deviation, RMSD)를 기준으로 클러스터링하였다. 그 결과로 매우 우세한 상대빈도를 보이는 하나의 구조를 얻었으며, 그 구조가 탄소 골격과 잔기의 배열의 측면에서 자기조립 펩티드로 사용되기에 적합함을 규명하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.939-940
• /
• 2007

다수본의 Bi-2223테이프로 구성되는 초전도전력케이블에서 발생되는 교류손실은 케이블의 효율을 저하시킬 뿐만 아니라 냉동기비용 증가로 인한 기존 케이블과의 가격경쟁에서 경제성을 저하시키는 주된 요인으로 작용하기 때문에 이의 상용화에 앞서 교류손실에 대한 정확한 규명이 되어야 한다. 그러나 다수본으로 구성되는 고온초전도전력케이블의 교류손실을 올바르게 평가하는 것은 테이프의 상이한 임계전류, 전압리드의 배열, 전류분포의 불균일성 및 인접한 테이프에 흐르는 전류위상 상이 등 복잡한 영향인자 때문에 매우 난해하다. 이와 같은 교류손실 평가와 관련된 복잡한 문제들을 규명하기 위해 다수본의 고온초전도도체 샘플을 제작하였으며 그 손실 특성을 실험적으로 조사 및 검토 하였다. 그 결과 다수본 고온초전도도체의 측정된 교류손실은 Monoblock모델 이론값 및 다각형모델에 근거한 수치해석 결과와도 상이함을 알 수 있다.

• Journal of the Korean Geographical Society
• /
• v.44 no.2
• /
• pp.176-186
• /
• 2009

Transportation policy to facilitate the public mode use is of the foremost importance to the local governments of Metropolitan Seoul, regarding the economic and environmental consequences of the increasing use of car. Understanding the travel behaviour is essential to the establishment of proper policy to guide more people to the use of public modes instead of private. The paper reports a result of sequential analysis of individual travel behaviour in Metropolitan Seoul, using a multi-dimensional motif search technique applied to Smart Card data that integrates individuals' different public mode uses. Groups of travel patterns with similar sequential information identified distinctive travel behaviour between Seoul north and south and between metro and bus uses. Travel patterns are more bounded within north Seoul and south Seoul respectively than crossing Han River between north and south. Within north and south, travel patterns visiting northern CBD and southern CBD, respectively, as well as their local neighbour in north and south, often use metro and metro-local bus combination, while travel patterns visiting only the north and south locals without CBDs more use only the local bus line and even only the areal bus line.