• The KIPS Transactions:PartB
• /
• v.18B no.2
• /
• pp.51-56
• /
• 2011

Algorithms for intrinsic images reduce color differences in RGB images caused by the temperature of black-body radiators. Based on the reference light and detecting single invariant direction, these algorithms are weak in real images which can have multiple invariant directions when the scene illuminant is a colored illuminant. To solve these problems, this paper proposes a method of acquiring an intrinsic image by omnidirectional projection of an ROI and a translation of white patch in the ${\chi}$-chromaticity space. Because it is not easy to analyze an image in the three-dimensional RGB space, the ${\chi}$-chromaticity is also employed without the brightness factor in this paper. After the effect of the colored illuminant is decreased by a translation of white patch, an invariant direction is detected by omnidirectional projection of an ROI in this chromaticity space. In case the RGB image has multiple invariant directions, only one ROI is selected with the bin, which has the highest frequency in 3D histogram. And then the two operations, projection and inverse transformation, make intrinsic image acquired. In the experiments, test images were four datasets presented by Ebner and evaluation methods was the follows: standard deviation of the invariant direction, the constancy measure, the color space measure and the color constancy measure. The experimental results showed that the proposed method had lower standard deviation than the entropy, that its performance was two times higher than the compared algorithm.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.3
• /
• pp.193-198
• /
• 2010

Melanin is synthesized by the melanocytes in basal layer of epidermis and distributed over all the layers of skin including corneocytes in stratum corneum, outermost layer of the epidermis. Melanin of corneocytes was stained using Fontana-Masson method and quantified by image analysis. The correlation between melanin contents and skin color value was estimated in the skin of 71 Korean women. Melanin covering area (MCA) showed good correlation with $L^*$ value and $ITA^{\circ}$ (Individual Typology Angle) (r = 0.6049, 0.6651, respectively). MCA can be used as new parameter for skin color study and has potential application for evaluating the efficacy of the skin whitening cosmetics.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.491-500
• /
• 2016

Fog is atmospheric in which tiny drops of water vapor are suspended in the air near the ground. Its form, occurrence, etc., change according to the temperature, relative humidity, wind and geographical features of the space around it. In particular, fog tends to occur near a source of water because of temperature and relative humidity difference. These days, climate change is increasingly affecting the occurrence of fog. Therefore the purpose of this study was to investigate how fog affects materials that are part of our cultural properties through outdoor exposure tests and artificial degradation. The degradation evaluation of materials as a function of fog occurrence frequency, showed that the color of metals changed noticeably, whereas dyed silk and Dancheong showed degradation on the surface and color differences but no particular tendencies. Therefore, damage prediction by color differences as a function of fog occurrence frequency was based on metal samples, which showed constant color differences. Through a comparison of the predictive value and color difference by outdoor exposure, the accuracy and applicability of the damage prediction formula was confirmed. If a more complex damage prediction formula is created, it is expected that prediction of the degree of material damage in the field would be possible.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.141-148
• /
• 2012

This study investigated the structural coloration and fabric hand of the caustic reduced fabrics for emotional garment using structural color yarns, which was spun by 37 alternating nylon and polyester layers capable of producing basic colors using biomimetic technology. The colorations of the three kinds of structural color yarns were confirmed using multi angle spectro-photometer, and their triangular cross sections composed with 37 alternating nylon and polyester layers were measured using SEM and were discussed with layer length in relation with coloration and spinning conditions were also set up. The apparent color difference and reflectance of the three kinds of fabrics with different density and weave pattern were analysed as ranging from 400nm to 700nm. The optimum fabric structural design which is made by warp and weft densities(194ends/in ${\times}$ 105picks/in) and caustic reduction condition by $100^{\circ}C$ temperature and 60minutes with NaOH, 20g/l solution were decided through analysis of the mechanical properties and fabric hands of these three kinds of fabrics treated with 3 kinds of the caustic reduction conditions. And it was shown that the rate of caustic reduction was increased from 13% to 23% with increasing temperature and time of caustic reduction. The extensibility, bending rigidity and shear modulus of caustic reduction treated fabrics were decreased by treatment of caustic reduction, on the other hand fabric compressibility was increased. And it was shown that the hand value of specimen number one which was treated with temperature $100^{\circ}C$ and time 60minute was the best and the hand of this fabric was better than that of Morpho $fabric^{(R)}$ made by Teijin co. Japan.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.2
• /
• pp.67-73
• /
• 2010

Whole process of textile printing is made by computer and it remarkably improves environment problem. This digital textile printing is becoming next step environment friendly textile printing method. But, still now range of textile possible for digital textile printing is limited, and also color analysis according to fiber types is not completed. The ink printed on the fabrics through DTP printer can be absorbed and fixed into textile without any blots by pre-treatment using suitable media solution for fabrics types. The chemical formulation of media solution used in the pre-treatment process varies according to the types of textiles and inks for DTP products. First, I studied reference books or articles about color analysis of digital textile printing. Second, I recorded pre-process, printing, post-process and coloring of silk, wool, nylon at same condition. After that, I analyzed $L^*\;a^*\;b^*$, Total K/S, ${\Delta}E$ and studied color intensity and coloring. According to this study, I suggested particular textile special for coloring and manual for affective coloring control. It showed that the performance of the digital printing on the Silk, Wool and Nylon blend fabrics treated by the media solution developed in this study was better than the one treated by the previous media solution for each single inks.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.1
• /
• pp.44-48
• /
• 2005

We prepared nickel silicide layers from p-Si(l00)/SiO₂(2000 Å)/poly-Si(700 Å)/Ni(400 Å) structures, feasible for gates in MOSFETs, by annealing them from 500℃～900℃ for 30 minutes. We measured the color coordination in visible range, cross sectional micro-structure, and surface topology with annealing temperature by an UV-VIS-IR spectrometer, field effect scanning electron microscope(FE-SEM), and scanning probe micro-scope respectively. We conclude that we may identify the nickel silicide by color difference of 0.90 and predict the silicide process reliability by color coordination measurement. The nickel silicide layers showed similar thickness while the columnar grains size and surface roughness increased as annealing temperature increased.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.83-83
• /
• 2012

면섬유는 강우량, 일조량, 온습도, 영양분 등의 성장환경조건과 유전인자 및 추수방법에 따라서 섬유길이, 단면구조, 꼬임, 성숙도 등이 다양하게 변화한다. 면섬유에는 pectin, cotton wax, 지방질, 단백질계 물질, 자연색소 및 무기질 등의 불순물을 약 5% 함유하고 있다. 이러한 물순물을 제거하여 처리액의 침투성 향상을 돕고, 백도를 증진시키기 위해 전처리를 한다. 본 연구에서는 산지별로 생산되는 원면의 특성을 알아보기 위해 중국, 인도, 인도네시아, 파키스탄에서 원면을 각각 수입한 후 동일한 조건으로 편직하였다. 4개국 원면의 꼬임과 단면형태를 관찰하고, 불순물의 함량을 알아보았으며, 정련과 표백처리를 농도별로 진행하여 전처리조건이 염색성에 미치는 영향을 알아보았다. 정련 및 표백조건을 20% 씩 증가시켜가며 전처리를 하였고 농도별로 전처리된 시료를 Yellow 색상의 반응성 염료 0.005% (owf)로 염색한 후 자동컬러측색장치(CCM)를 사용하여 색차, Yellow Index(Y.I.), White Index(W.I.)를 비교분석하였다. 결과를 보면 인도산 원면이 다른 원면에 비해 Y.I.와 W.I.에서 다소 차이를 보였고, 염색현장과 조제업체에서 제시한 표준 전처리조건을 참고로 하였을 때, 표준 전처리조건 대비 0 ~ 40% 농도까지는 색상차이가 크게 나타나지만 60% 농도 이상에서는 색상차이가 크지 않았다. 이 결과로부터 산지별 원면의 전처리시 최소한의 조제투입량으로 최적의 전처리효과를 볼 수 있는 전처리공정조건을 설정할 수 있었고, 이로써 원가절감 및 오폐수감소 등의 효과를 기대할 수 있다.

• The Research Journal of the Costume Culture
• /
• v.6 no.1
• /
• pp.58-70
• /
• 1998

The color difference value of fabrics dyed with browning extracts from mushroom were as follows. 1. Two hours of dyeing depending on pH at 95℃ exhibited colors of YR and Y. The color of wool and nylon was darkest brown at pH 4, but light brown or yellow as pH increased. The color of silk was darkest brown at pH 5 and pH changes resulted in the same tendency as in wool. 2. In wool the color was changed to darker brown as time prolonged, however, there was no further color change after 9hr and value and chroma of wool declined. 3. At pH 4, the increase in temperature turned colors of sil, wool and nylon into dark brown from light yellow. 4. As the result of repetitive dyeing, colors of silk, wool and nylon gradually turned into darker brown. The repetitive dyeing was more effective in dark color and high colorfastness compared to a prolonged dyeing. 5. The amount of mordant resulted in color changes between light yellow and dark brown without various color changed. 6. In color change according to methods of mordant, post-mordant with CuSO₄·5H₂O and with SnCl·2H₂O showed colors of green and light yellow, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.1
• /
• pp.94-103
• /
• 1996

기능성 해조음료를 개발하기 위하여 미역, 톳 및 다시마를 저온하에서 마쇄, 원심분리, 한회여과를 거쳐 생해조 세포액을 얻었으며, 각 해조 생세포액의 성분 분석과 색차 측정 및 관능검사를 통하여 품질평한 결과 다음과 같았다. 원심분리 후 한외 여과에 의한 생세포액의 수율은 생해조에 대하여 6.8~56.5% 였으며, 톳과 미역의 수율은 높았으나 다시마는 수율이 낮았다. 해조액을 한회여과한 다음 동결건조한 시료의 회분 합량은 28~60%였으며, 조단백 함량은 12.7%~6.7%정도 였는데 미역과 톳은 다시마 보다 각 성분의 함량이 많았다. 알긴산과 chlrophyll 및 carotenoid 은 한회여과막에 의하여 대부분 제거되었으나 톳의 polyphenol은 30K 한외여과막에 의해서도 효과적으로 제거되지 않았다. 다시마와 톳 생세포액의 주요 아미노산은 glutamic acid와 aspartic acid 였으며, 미역의 경우는 alanine, aspartic acid, valine이었다. 해조 생세포액중의 무기 질은 칼륨의 함량이 특히 높았으며 양이온의 경우 나트륨, 마그네슘, 칼슘, 철, 아연, 망간, 구리순으로 함유 되어있었다. 음이온으로는 $Cl^{-}$,$SO_{4}^{2-}$,$HPO_{4}^{2-}$,$NO_{3}^{-}$의 함량이 높았으며, I와 Br의 함량은 다시마가 톳과 미역에 비하여 높았다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.139-144
• /
• 2001

In order to analyze of the color perception Farnsworth Test Panel D-15 in the CIELab color space coordinates, it was measured by the reflectance spectrum of the 380~780nm wavelength regions. The Test Panel D-15 was situated in the near origin point of higher the saturation in CIELab coordinates (a, b). Normal person perceived to the similar color for the color of small color difference, and color deficiency person depended on the confusing color line and the neutral point unconcerned with the color difference. In case of Ptotanopia, Deutrnopia, r-g defect, y-b defect with the color deficiency, the neutral points position (a,b) were each (2.12,1.02), (4.25,2.05), (2.51,0.25), (1.20,-1.10).