• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.63-74
• /
• 2008

Site response analyses were performed based on equivalent linear technique using the local geologic and dynamic site characteristics, which include soil profiles, shear wave velocity profiles and depth to bedrock for 125 sites collected in Korean Peninsula. From the results of site response analyses, 2-parameters site classification system based on the combination of mean shear wave velocity of soil and depth to bedrock was newly recommended for regions of shallow bedrock depth in Korea. First, as the borders of bedrock depth (H) for site classification were determined as 10m and 20m, the soil sites were divided into 3 classes as $H_1$, $H_2$ and $H_3$ sites. And then, the 3 site classes were subdivided into 7 classes based on the mean shear wave velocity of soil ($V_{s,soil}$). The feasibility of new site classification system was verified and the representative site coefficients ($F_a$ and $F_v$) and design response spectrum were suggested by analyzing uniform trend and dispersion of site coefficients for each site class. The suggested site coefficients and the regression curves present the nonlinear characteristics of soils according to the change of rock outcrop acceleration with uniform trend effectively. From the comparison between the mean values of response spectrum which was acquired from the site response analysis and the suggested design response spectrum, there was a little difference in some of site classes and it was verified to adjust the integration interval to make it more suitable for the site condition in Korea.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.374-384
• /
• 2016

Concern about air pollution is gradually rising up in domestic and foreign, automotive and fuel researchers are trying to reduce vehicle exhaust emissions, through a lot of approaches, which consist of new engine design and innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research is proceeding by two main issues : exhaust emissions and PM particle emissions of gasoline vehicle. Exhaust emissions, non-regulated emissions and PM (particulate matter) particles of automotive are causing many problems which ambient pollution and harmful effects on the human body. The main particulate fraction of automotive exhaust emissions consists of small particles. Because of their small size, inhaled particles can easily penetrate deep into the lungs. The rough surfaces of these particles make it easier for them to combine with other toxins in the environment. Thus, the hazards of particle inhalation are increased. Based on the oxygenated fuel additive types (MTBE, Bio-ETBE, Bio-ethanol, Bio-butanol), this paper discussed the influence of oxygen contents on gasoline vehicle exhaust emissions, non-regulated emissions and nano-particle emissions. Also, this paper assessed exhaust emission characteristics at 2 type test modes. The test modes were FTP-75 and HWFET. All measurement items be verified less than the value of regulated emissions. It could be known difference increase and decrease by each measurement item depending on increase the oxygen contents.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.4
• /
• pp.617-629
• /
• 2020

In order to overcome the limitations of the rule-based intrusion detection system due to changes in Internet computing environments, the emergence of new services, and creativity of attackers, network anomaly detection (NAD) using machine learning and deep learning technologies has received much attention. Most of these existing machine learning and deep learning technologies for NAD use supervised learning methods to learn a set of training data set labeled 'normal' and 'attack'. This paper presents the feasibility of the unsupervised learning AutoEncoder(AE) to NAD from data sets collecting of secured network traffic without labeled responses. To verify the performance of the proposed AE mode, we present the experimental results in terms of accuracy, precision, recall, f1-score, and ROC AUC value on the NSL-KDD training and test data sets. In particular, we model a reference AE through the deep analysis of diverse AEs varying hyper-parameters such as the number of layers as well as considering the regularization and denoising effects. The reference model shows the f1-scores 90.4% and 89% of binary classification on the KDDTest+ and KDDTest-21 test data sets based on the threshold of the 82-th percentile of the AE reconstruction error of the training data set.

• Toxicological Research
• /
• v.20 no.2
• /
• pp.101-108
• /
• 2004

The different social reflections about the benefits and the potential risks of genetically modified (GM) crops have evolved with .different reactions in different countries. Many countries including Korea are working toward setting down new guidelines. Korea requires companies to label all food that contains more than 3% GM ingredients. One of the rapid and convenient detection methods of GM ingredients is amplification of the introduced DNAs by polymerase chain reaction (PCR). Many PCR kits for this purpose are commercially available. The objective of this study was to evaluate performance of commercialized GM crop detection kits. The results showed that 6 out of 15 kits tested did not meet the requirements even purposed by the manufacturers themselves in terms of stability, reproducibility, and detection limits, suggesting a potential quality control problem in their design stage or production line. The evaluation also suggests that, although the duplex and triplex detection kits allowed unambiguous detection in a single PCR reaction, the monoplex detection kits were the most sensitive to the detection of GM ingredients. The detection limits also differ between soybean and corn. Results from this study will be useful in the development of sound qualitative tracking systems of GM ingredients for monitoring throughout the cultivation of GM crops, their trans-boundary movement, and food production using GM grains as well as for complying with government guidelines associated with GM crops.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.160-167
• /
• 2011

Shallot is a foreign crop introduced from France in 1995 as a new overwintering field crop with an aim to develop as an export crop. During the introductory cultivation trials, several problems were raised such as premature growth depression in early summer, sensitivity to summer moisture, and weakened vigor of the seed bulbs following successive propagations. This study was conducted to develop proper cultural methods based on annual productivity and adaptability of growing area to address and suggest solutions to some of these problems. Bulb weight was 18.7 g and bulb yield per 10a was 4,113 kg in 1995. In 1996, bulb weight increased to 25.8 g, while bulbs yield per 10a deceased to 2,013 kg. This trend continued in 1997 so that bulb weight increased, and yield per 10a decreased as compared to those in 1996. However, in 1998, both bulb weight (21.1 kg) and yield per 10a (1,246 kg) decreased significantly as compared to those of the previous years. Plant growth from planting to April in the coastal area was better than in other areas. However, the plant growth thereafter until early July was better in the semi-highland area. As a result, the bulb yield in the semi-highland area was 57% more than that in the lowland areas such as the coastal area.

• Korean Journal of Microbiology
• /
• v.52 no.1
• /
• pp.32-39
• /
• 2016

Coastal plant species Tetragonia tetragonoides (Pall.) Kuntze native to the Dokdo islands was sampled and then 17 endophytic fungi were purely isolated based on morphological differences. The fungal isolates were characterized by their growth properties under NaCl concentration or pH gradient. Culture filtrates of the 17 fungal isolates were treated to Waito-c rice (WR) seedlings for verifying plant growth-promoting activity. As the results, YH103 strain showed the highest plant growth-promoting activity among them. Phylogenetic analysis of the isolates was done by the maximum likelihood method based on partial internal transcribed spacer region (ITS region: contaning ITS1, 5.8S, and ITS2), beta-tubulin (BenA), and calmodulin (CaM) gene sequences. Chromatographic analysis of the strain YH103 culture filtrate showed the existence of gibberellins ($GA_4$, $GA_7$, $GA_8$, and $GA_{19}$). Finally, the strain YH103 was identified as Aspergillus tubingensis by microscopic observation and molecular analysis and, to our knowledge, this is the first report of GAs producing A. tubingensis.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.1
• /
• pp.219-244
• /
• 2014

Agricultural extension service in Ethiopia was started in early 1950s with mandate of transferring local research outputs and technologies to farmers, and importing technologies and improved practices from abroad. Extension service provided in this early time was limited to areas surrounding the experiment stations. Since then, Ethiopian Agricultural extension service has passed through at least five stages: the land grant extension system, the Comprehensive Package Programs, the Minimum Package Projects, the Peasant Agricultural Development Program, and the Participatory Demonstration and Training Extension System (PADETS). The comprehensive package extension program was initially implemented in selected pilot areas and eventually to be scaled up to cover about 90% of the farming community within 15-20 years time. The program used demonstration plots managed by development agents and used to train farmers organized through various field days. However, since all of these programs were operational in only small areas, the vast majority of the country was out of their reach. Through Participatory Demonstration and Training Extension System, the extension service in Ethiopia has come under the spotlight and government debates and external reviews are putting additional scrutiny on the system. Despite this long history, the system is still in its infancy in terms of coverage, communication and institutional pluralism. Currently in Ethiopia the Agricultural extension is provided primarily by the public sector, operating in a decentralized manner through which extension is implemented at the district level. Therefore, the main focus of this paper is to scrutinize the past, the present and the future Agricultural extension system in Ethiopia.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.54-59
• /
• 2009

We have measured the spatiotemporal behavior for the density of excited Xe atoms in the $1s_5$ metastable states by laser absorption spectroscopy in accordance with various shapes of ITO electrode. The maximum density of excited Xe atoms in the Is5 state in a discharge cell for fish-boned, T-shaped and squared ITO electrodes has been measured to be $3.01{\times}10^{13}\;cm^{-3}$, $2.66{\times}10^{13}\;cm^{-3}$ and $2.06{\times}10^{13}\;cm^{-3}$, respectively. Throughout this experiment, we could understand the influence of the shapes of ITO electrode of micro discharge cell on the high efficiency of AC-PDPs.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.248-253
• /
• 2023

Most offshore platforms utilize chain mooring systems for position keeping. However, information regarding related design modification processes is scarce in literature. This study focuses on the floating liquefied natural gas (LNG) bunkering terminal (FLBT) as the target of shore platform and analyzes the corresponding initial mooring design and model tests via numerical simulations. Subsequently, based on the modified design conditions, a new mooring system design is proposed. Adjusting the main direction of the mooring line bundle according to the dominant environmental direction is found to significantly reduce the mooring design load. Even turret-moored offshore platforms are exposed to beam sea conditions, leading to high mooring tension due to motions in beam sea conditions. Collinear environmental conditions cannot be considered as design conditions. Mooring design loads occur under complex conditions of wind, waves, and currents in different environmental directions. Therefore, it is essential appropriately assign the roll damping coefficients during mooring analysis because the roll has a significant effect on mooring tension.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2013

Dynamic Software Update(DSU) is a technique, which updates a new version of the software to a running process without stopping. Many DSU systems that update C application programs are introduced. However, these DSU systems differ in implementation method or in main features. In this paper, we propose a new DSU system that can solve some disadvantages of existing DSU systems. DSU system presented in this paper splits existing program to code, global data and local data and then updates each part of the program considering the characteristics of the respective parts. The proposed system in this paper is implemented and tested on Linux. Also, we compared our DSU system with other DSU systems and we could find some strength of our DSU system. First, the code memory usage of our DSU system can be efficient since our system does not need to maintain code of an old version. Second, the global data memory waste is small because our system does not need to allocate the global data again which is not modified in the new version. Finally, we restore local data of old version in stack area of the new version using stack reconstruction technique. This paper is meaningful since we proposed a new DSU method and we implemented a full DSU system using the method.