• Journal of the Korean GEO-environmental Society
• /
• v.10 no.5
• /
• pp.69-73
• /
• 2009

In this study, three dimensional numerical analyses were performed with variation of pile spacing (S=3D, 4D, 5D) to compare the behaviour of single pile and pile group with cap in granite soil. In order to compare and analyze the lateral resistance of single pile and pile group by changing pile spacing, the pile group with array of $1{\times}3$ was employed. To reduce the computation time the symmetric boundary condition was used. And Druker-Prager model and elasticity model were used for granite soil and for concrete pile and cap, respectively. Using the analyses results of pile group in granite soil under lateral loading, p-y curve for pile group and single pile with changing pile spacing was drawn. With p-y curve p-multiplier was evaluated. As a result of analysis, the value of p-multiplier was increased with increasing pile spacing under 1.0 due to pile shadow effects.

• Computational Structural Engineering
• /
• v.4 no.1
• /
• pp.20-27
• /
• 1991

본 논문에서는 유체-구조 상호작용해석의 일종의 3차원 접수구조물의 진동해석을 효과적으로 수행하기 위한 해석방법을 제시하기 위하여 동적재해석기법을 검토하였다. 접수구조물의 유한구조 상호작용해석 결과는 구조진동의 관심 주파수역에서는 3차원 연성 부가수질량으로 표현되는 관성력으로 나타난다. 따라서 구조질량행렬에 부가수질량 행렬이 더해져서 전체 관성력으로 표현된다. 이 부가수질량을 추가질량으로 보고 재해석기법을 응용하는 방법을 수치실험을 통해 검증하였다. 이 때 재해석기법이 갖추어야 할 조건은 원구조의 질량과 거의 같은 정도의 질량이 추가되고 또한 완전 연성질량이 추가된 경우에도 정확한 해를 주어야 한다는 것이다. 이를 검증하기 위해 직접재해석기법과 섭동법을 이용한 재해석기법으로 4질량 스프링지지구조에 대한 해석을 수행한 결과 직접재해석기법의 응용이 적합함을 쉽게 입증할 수 있었다. 접수구조물의 예로는 3차원 잠수주상체에 대해 접수진동해석을 수행하였으며 그 결과 선체진동해석에 전통적으로 이용되고 있는 2차원 부가수질량과 3차원 수정계수를 사용한 기준차수법에서는 수지모드와 수평-비틔 연성모드와 같이 서로 독립적인 모드에 대해서는 따로 진동해석을 수행해 주어야 하는 단점이 발견되었다. 이 단점을 보완한 각 모드의 3차원 수정계수행렬을 이용한 재해석기법을 도입하여 모드에 상관없이 동시에 해를 구할 수 있었다. 그러나, 이 방법은 3차원 수정계수가 구해져 있는 경우에 한해서만 적용가능하며 실제 선체진동의 경우에는 10Hz 미만의 저차 주선체 진동에 한해서만 적용가능한 방법이다. 고차의 진도옴드에는 3차원 수정계수를 구할 수 없기 때문에 유체-구조 상호작용 해석결과로부터 얻은 3차원 연성 부가수질량을 이용하게 되며 이 때 이 행렬이 접수구조 표면의 전 자유도와 연성되어 있기 때문에 방대한 방정식을 푸어야 하지만 직접재해석기법을 적용함으로써 정확한 해를 구할 수 있었다. 또한 3차원 부가수질량을 이용한 직접재해석기법은 종래의 2차원 부가수질량과 3차원 수정계수를 이용한 방법에 비해 해석시간 면에서도 전혀 불리한 점이 없는 경제적 방법임이 밝혀졌다. 앞으로 Slamming 혹은 수중폭파 등의 충격하중에 의한 천이 구조응답 해석을 위한 효과적인 방법에 대해서도 연구결과를 발표할 계획이다.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.3
• /
• pp.17-22
• /
• 2010

This paper analyzed the characteristics of p-multiplier and the load distribution of H-pile group installed in weathered soil under horizontal loading. The results of this study conducted in pile arrangement ($2{\times}3$, $3{\times}3$), the pile center to center spacing (2D, 4D, 6D), and soil density (relative density: 40%, 80%) were drawn as follows. As to the average horizontal loading applied to each pile in pile groups, the fewer number of piles was, the larger average horizontal resistance became. As the result of analysis on p-y curves of single piles and pile groups according to the pile distance and the soil density, as the pile spacing was increased from 2D to 6D, the interaction coefficients of pile group showed 0.85~0.94 (piles in the front row), 0.57~0.79 (piles in the middle row), and 0.60~0.71 (piles in the rear row) in the loose ground and showed 0.76~0.82 (piles in the front row), 0.58~0.73 (piles in the middle row), and 0.53~0.70 (piles in the rear row) in the dense ground. As above, the wider pile distance was, the larger interaction coefficient value was shown among piles. In addition, piles in the front row showed bigger interaction coefficients than that of piles in the middle and back row.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.525-540
• /
• 2012

The purpose of the present study is to examine the causal relationship and invest the difference among isolation, interaction, content satisfaction, achievement and persistence in cyber university education by employment status. For this study, 104 students at A cyber university in Korea completed surveys in the fall semester of 2011. The result of this study indicated that there was a meaningful effect of interaction on isolation. Secondly, there was a meaningful effect of interaction on content satisfaction. Thirdly there was a meaningful effect of interaction on achievement. Lastly there were meaningful effects of isolation and interaction on persistence. In addition, according to multi-group analysis, there were no significant differences of structural path coefficients between two groups. Based on these results, this study suggests instructional design methods and management strategies to improve the quality of learning in cyber universities.

• Journal of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.325-330
• /
• 1990

The solubilities of caffeine in supercritical ammonia were measured at various temperatures and pressures to represent the relationship between the solubility and the density of ammonia at desired temperature and pressure by means of a simple equation. Using the equation, the interaction virial coefficient between ammonia and caffeine has been determined to give the parameters of Lennard-Jones potential function for the system. Furthermore, there are comparisons and discussions of the interaction virial coefficients and Lennard-Jones potential functions determined by the same techniques from the solubility data of naphthalene in supercritical ammonia and of caffeine and naphthalene in supercritical carbon dioxide from existing data sources others.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.585-589
• /
• 2015

본 연구에서는 이중압축램프의 초음속 유동에서 발생하는 충격파 경계층 상호작용을 EDISON_CFD로 해석하기로 한다. 이중압축램프에선 역압력 구배로 인하여 경계층이 박리가 일어나게 되고 박리된 경계층이 다시 이중압축램프에 부착되어 생겨난 박리영역을 관찰할 수 있다. 박리영역의 앞뒤로 유동의 방향이 바뀌게 되면서 압축 팬(compression fan)과 재부착 팬(reattachment fan)이 충격파를 발생시키고 이중압축램프전방의 충격파와 만나서 복잡한 유동 구조를 가지게 됨을 확인하였다. 이와 같은 층류에서 난류, 박리와 재부착의 영역에서의 해석하기 위해선 해석자의 난류모델이 중요하다. $15^{\circ}-30^{\circ}$, $15^{\circ}-45^{\circ}$의 두 종류의 이중압축램프를 $k-{\omega}$ SST 난류 모델과 ${\gamma}-Re_{\theta}$ 천이 모델로 계산을 EDISON_CFD로 수행하였다. 난류 모델의 차이를 표면마찰계수, 압력계수, 마하수로 비교하여 차이점을 분석하였다.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.485-498
• /
• 2014

In this paper, vehicle-bridge interaction analysis under a series of moving vehicles to simulate a lane load was performed to estimate impact factor of the main cable, hanger and girder for the selected suspension bridges with 404m and 1545m main span. Korea Bridge Design Code(Limit State Design) was selected for the live model in which KL-510 truck was modeled 6-d.o.f. vehicle and a lane load was simulated by a series of single-axle vehicles. For the 404m main span bridge, hinge-type and floating-type girders at the tower were considered to examine the impact factor according to the connection and supporting type of the girders. The parameters considered herein are the types of live load-a truck only and a truck plus lane load, eccentricity of moving vehicles, road surface roughness and vehicle speed. The road surface roughness was randomly generated based on ISO 8608 and it was applied to the truck only. The impact factors were also evaluated by using the influence line method that is commonly used in cable-supported bridges and compared with those from vehicle-bridge interaction analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.243-243
• /
• 2003

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.284-288
• /
• 2009

With explosively growing PPI databases, the computational approach for a prediction and configuration of PPI network has been a big stream in the bioinformatics area. Recent researches gradually consider physicochemical properties of proteins and support high resolution results with integration of experimental results. With regard to current research trend, it is very close future to complete a PPI network configuration of each organism. However, direct applying the PPI network to real field is complicated problem because PPI network is only a set of co-expressive proteins or gene products, and its network link means simple physical binding rather than in-depth knowledge of biological process. In this paper, we suggest a protein functional flow model which is a directed network based on a protein functions' relation of signaling transduction pathway. The vertex of the suggested model is a molecular function annotated by gene ontology, and the relations among the vertex are considered as edges. Thus, it is easy to trace a specific function's transition, and it can be a constraint to extract a meaningful sub-path from whole PPI network. To evaluate the model, 11 functional flow models of Homo sapiens were built from KEGG, and Cronbach's alpha values were measured (alpha=0.67). Among 1023 functional flows, 765 functional flows showed 0.6 or higher alpha values.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.718-725
• /
• 1999

In order to investigate the interaction characteristics of poly(dimethylsiloxane) (PDMS) with various solvents such as water, ethanol, and iso-propanol, Inverse Gas Chromatography(IGC) at finite concentration, which is a very fast, accurate, and thus promising technique in thermodynamic study of polymer systems, is employed. By measuring the specific retention volumes of the probes, the interaction parameters are calculated by means of the Flory-Huggins equation. From the results, the interaction parameters of the probes are, as expected due to the hydrophobicity of the polymer, found to be of large positive values (2$2.0{\times}10^{-3}mol/g$. For the linear PDMS, interpretation of the space distribution of molecules is performed by the Kirkwood-Buff-Zimm(KBZ) integrals, which give intuitive information about physical properties. From the KBZ integrals, water does not show the tendency of preferential solvation with the PDMS but formed self-cluster. The larger solvent molecules show a stronger tendency to distribute more randomly in the mixture.