• Proceedings of the Korea Water Resources Association Conference
• /
• 1986.07a
• /
• pp.131-145
• /
• 1986

흐름수역에서 연직상향으로 방류되는 평면부력\ulcorner의 거동이 연속방정식, 운동량방정식 및 추적물수송식의 기본방정식에 의하여 수치적으로 해석된다. 난류확산에는 Prandtld의 혼합거리이론을 도입한 난류수송모형이 이용된다. 수치해 과정은 기본방정식을 유함수(stream function)식, 와도수송(vorticity transport)식으로 변환한 후, \ulcorner방류속도와, 방류구폭 등으로 표현되는 변수와 흐름을 지배하는 무차원 매개변수를 도입하여 무차원 형태로 표현하는 부분과 successive under-relaxation과 Gauss-Seidel반복법으로 수행하는 부분으로 이루어진다. 적절한 relaxation 계수를 선정하므로써 안정되고 수렴성이 좋은 계산이 수행된다. \ulcorner방류 속도와 가로흐름 속도의 비가 속도비(Velocity ratio)로 정의되며 속도비가 8 - 15의 범위에서 부력\ulcorner으로 인한 주변흐름수역의 속도변화 온도상승범위, 흐름상태(유선) 및 와도가 조사되었으며 \ulcorner의 경로에 대하여 속도비와 방류밀도후르드수의 영향이 또한 조사되었다. \ulcorner중심선의 속도와 온도변화, 국부밀도후르드수의 변화가 구해지며 퍼짐율(dispersion ratio), 확산비(spreading rate)가 방류밀도후르드수, 국부밀도후르드수 및 방류구로부터의 경로의 항으로 해석되었다. 또한 속도와 온도 분포에 상사(similarity)가 존재함이 밝혀졌으며 본 연구와 같은 조건의 범위에서는 Gaussian분포를 이용한 적분형해석(intergal type analysis)이 가능한 것으로 사료된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.93-101
• /
• 1986

The behavior of a plane buoyant jet discharged vertically upward into a stagnant uniform environment is analyzed by continuity, momentum transport equation by numerical scheme. The governing equations are solved by finite difference method employing stream function and vorticity transport and Prandtl's turbulent model. Results for centerline velocities and temperatures, temperature distribution and flow pattern in receiving environment due to buoyant jet in the range of discharge densimetric Froude number of 4 to 32 show good agreement with published data. Spreading rate and dispersion ratio, which are required in integral type analysis of whole range of buoyant jet and have not been obtained yet, are derived in terms of discharge densimetric Froude number and vertical distance from source.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.169-178
• /
• 2008

The goals of this study were to provide data of 3 dimensional ground reaction force(GRF) parameters during stair ascent and descent on three different stair runs and to investigate variability and asymmetry index of them. 10 healthy adults participated in this study and performed 7 different types of gait with 10 trials each. After data analysis, following results were found. Firstly, stair run did not affect on the pattern of GRF parameters, coefficient of variation and asymmetry index. Secondly, a significant different GRF pattern was found between level walking and stair walking. Especially, ascending stair walking has only large Fz1 and small Fz3 while level walking and descending stair walking have a "M" shape connected by Fz1, Fz2 and Fz3. Thirdly, only vertical GRF parameters of stair walking revealed acceptable coefficient of variation and asymmetry index.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.7
• /
• pp.151-158
• /
• 2009

In the early 1990s, soil nailing was first introduced as method of reinforcement for the slope stability and ground excavation, and as its application was increased the improved soil nailing was also developed. Most recently used for grout soil nailing greatly improve the methods and techniques for self-improvement techniques are classified as soil nailing. As the representative for the grout pressure method to improve the join method pressure grouting and improved method for the self-drilled soil nailing, removable soil nailing, upward soil nailing combined with horizontal drainage system. This paper is to compare upward soil nailing combined with horizontal drainage system with downward direction of the soil nailing. In order to study the limit equilibrium slope stability analysis and comparison with factor of safage, excavation for the vertical displacement for comparison with continuous analysis. According to this study, safage factor is decreased considerably using limit equilibrium analysis and makes no odds for the horizontal displacement when soil nail was installed upward.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.573-581
• /
• 2006

This paper presents a turbulence modeling of the open-channel flows over smooth-rough bed strips. A Reynolds stress model is used for the turbulence closure. The simulated mean flow and turbulence structures are compared with the previously reported experimental data. Comparisons reveal that the developed Reynolds stress model successfully predicts the mean flow and turbulence structures of open-channel flows over smooth-rough bed strips. The computed flow vectors show cellular secondary currents, of which the upflow occurs over the smooth bed strip and the downflow over the rough bed strip. It is found that the cellular secondary currents affect the mean flow and turbulence structure. A budget analysis of the streamwise vorticity equation is also carried out to investigate the mechanism by which the secondary currents are generated.

• Journal of KIISE:Databases
• /
• v.36 no.4
• /
• pp.280-291
• /
• 2009

Skyline Query processing is important to wireless sensor applications in order to process multi-dimensional data efficiently. Most skyline researches about sensor network focus on minimizing the energy consumption due to the battery powered constraints. In order to reduce energy consumption, Filtering Method is proposed. Most existing researches have assumed a snapshot skyline query processing and do not consider continuous queries and use data generated in ancestor node. In this paper, we propose an energy efficient method called Bottom up filtering tuple selection for continuous skyline query processing. Past skyline data generated in child nodes are stored in each sensor node and is used when choosing filtering tuple. We also extend the algorithms, called Support filtering tuple(SFT) that is used when we choose the additional filtering tuple. There is a temporal correlation between previous sensing data and recent sensing data. Thus, Based on past data, we estimate current data. By considering this point, we reduce the unnecessary communication cost. The experimental results show that our method outperforms the existing methods in terms of both data reduction rate(DRR) and total communication cost.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.477-490
• /
• 2006

Existing index structures need very much update cost because they repeat delete and insert operations in order to update continuously moving objects. In this paper, we propose a new index structure which reduces the update cost of continuously moving objects. The proposed index structure consists of a space partitioning index structure that stores the location of the moving objects and an auxiliary index structure that directly accesses to their current positions. In order to increase the fanout of the node, it stores not the real partitioning area but kd-tree as the information about the child node of the node. In addition, we don't traverse a whole index structure, but access the leaf nodes directly and accomplish a bottom-up update strategy for efficiently updating the positions of moving objects. We show through the various experiments that our index structure outperforms the existing index structures in terms of insertion, update and retrieval.

• Journal of the Korean Society for Railway
• /
• v.17 no.5
• /
• pp.349-354
• /
• 2014

Other foreign countries already apply ETCS LEVEL 2 in signaling systems. It provides added functions to control a train using wireless communication compared with ETCS LEVEL 1. Nowadays, the ETCS LEVEL 2 system is being applied on revenue services more and more frequently. Therefore, it is necessary to develop ETCS LEVEL 2 to apply in this country. The advanced technology of the ETCS LEVEL 2 system provides continuous control for train protection, and ATP function, by comparing discontinuous controls on ETCS LEVEL 1. ETCS LEVEL 2 is a better system model for improving passenger safety. This paper describes the design of an onboard speed profile for the ETCS LEVEL 2 system and it forecasts the future of ETCS.

• Journal of Korea Foundry Society
• /
• v.10 no.1
• /
• pp.57-63
• /
• 1990

Continuous casting of the $Al-CuAl_2$ eutectic composite was carried out by the upward continuous casting process. The morphology of the eutectic growth and the stability of solid-liquid interface were investigated under various growth conditions. It was possible to get the planar solid-liquid interface at the condition of $G_L/R$＝$3.6{\times}10^3^{\circ}Csec/mm^2$. And the colony structures were formed at the conditions of $G_L/R$ < $R=0.33{\times}10^3^{\circ}Csec/mm^2$. The inter-lamellar spacing of $Al-CuAl_2$ eutectic composite was decreased with the increase of pulling speed. The reduction of inter-lamellar spacing & value of $G_L/R$ caused the increase of ultimate tensile strength and Rockwell hardness in $Al-CuAl_2$ eutectic composite.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.49-56
• /
• 2004

본 연구는 1997년 세계문화유산으로 지정된 수원화성의 야간경관조명연출에 따른 조명실태와 효과를 조사 분석하였다. 평가대상은 화성의 경관조명시설이 설치된 33개소 중 측정당시 설치가 완료된 성곽의 내 외부와 서북공심돈을 선정하였다. 평가방법은 야간에 조명현황조사 및 물리량의 측정을 실시하였다. 물리량은 피조면의 휘도, 색온도 및 색도를 측정하였으며, 이를 토대로 경관조명의 연출효과를 분석하였다. 분석결과, 전체적인 조명방식은 건축물 하단부에 설치된 지주등으로 상향조명을 하거나, 외곽 투광기를 이용한 전반조명이 병용되고 있었다. 조명연출실태는 성벽의 경우 연속된 성곽의 이미지를 강조하고, 빛의 콘트라스트를 이용하여 건축시설물을 강조함으로써 리듬감을 연출하였다. 색온도의 경우 성곽의 차가운 이미지를 보완하기 위하여 따뜻한 색온도의 광원을 사용하여 전체적 이미지를 안정적이고 부드럽게 표현하였다. 색도의 경우 전체적으로 황색의 색도가 나타났는데, 우리나라 전통건축에서 강조되어야 할 단청이나 부재를 위해서는 광원의 색채선정에 신중한 고려가 요구된다.