• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.6
• /
• pp.391-399
• /
• 2020

In this study, the behaviors of a suction cap shaped as an arch were analyzed using finite element models. The fundamental structural behaviors of both flat- and arch-type caps were compared, and the advantages of the arch-shaped cap were explained. Moreover, the effects of geometric parameters and stiffener arrangements on the stress and deformation of the arch-shaped caps were investigated by comparisons of the changes in the behaviors of the caps. Additionally, the effects of boundary condition at the edge of the cap were analyzed to study the interactions between the cap and cofferdam walls; these results were used to derive the fundamental structural design of stiffened arch caps. Unlike flat caps, the results showed that ring stiffeners could improve the structural behaviors of arch caps remarkably, while the contributions of the radial stiffeners to the structural behaviors of the caps are dependent on constraints at the edges of the caps.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.45-45
• /
• 2020

하천 횡단구조물 하류부에서는 고유속 및 ±압력에 의해 하상재료가 유실되는 세굴현상이 발생한다. 이러한 세굴을 방지하기 위해 횡단구조물 하류부에는 석재, 콘크리트 및 콘크리트 블록 등을 설치 및 포설하여 하상보호공을 설치한다. 하상보호공을 설치하면 설치된 부분은 세굴이 방지 되지만, 하상보호공 끝단 이후에는 지반이 노출되어 있어 노출된 지반에서 고유속 흐름 및 압력변화에 의한 세굴이 발생하는 경우가 많다. 이에 본 연구에서는 하상보호공 끝단 즉, 하상이 노출된 지반에서 압력변화에 따라 하상재료가 유실되므로 압력에너지를 감쇄시키기 위한 하상보호장치를 개발하였다. 개발한 하상보호장치는 본래 다수개가 열을 지어 메트릭스 형태로 설치되도록 하여야 하지만 실험 여건상 단일체로 수리실험을 진행하였다. 하상보호장치는 상판과 하판이 조립된 형태이며 상판과 하판 사이에 이격공간이 구비되어있다. 하상보호장치 검증을 위해 상판과 하판에 쓰이는 판은 수로재질과 같은 아크릴로 제작하였으며, 하상재료의 공극률을 반영하여 다공성 판으로 제작하였다. 다공판의 전체 구멍 면적 대비 판 면적은 35 % 로 동일하다. 상판 구멍 지름 15.0 mm, 4.5 mm 2가지로 제작하였으며, 하판 구멍 지름 3.0 mm 으로 동일하다. 압력변화가 큰 곳에서 작은 곳으로 물이 이동하게 되므로 고유속 수리조건에서 상판과 하판 사이에서의 압력변화를 측정하기 위해 판 중간에 압력계를 설치하였다. 하상보호장치 설치지점 앞 0.3 m 부근에 PIV를 설치하여 유속을 측정하였다. 실험결과 상판의 구멍 직경(15.0 mm)이 클 경우 상판부 압력이 하판부로 전달되어 하판에서 측정되는 압력이 증폭 되었으며, 상판의 다공성 구멍 직경(4.5 mm)이 작을 경우 상판부에서 하판부로 전달되는 압력이 감소하여 하판에서 측정되는 압력이 감소하였다. 상판과 하판의 다공성 구멍의 직경을 적절한 사이즈로 조절하면 상판부의 압력이 하판부로 전달되는 것을 막고 압력에 의해 하상에서 흡출되는 유사를 막을 수 있는 것으로 판단되며 추후 상판과 하판의 다공성판 구멍 직경의 상대적 차이에 따른 압력 감소효율에 관한 연구가 필요하다고 판단된다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.487-490
• /
• 2003

국가의 사회간접자본 시설확충 정책에 따라 교량공사의 건수는 계속 증가되어 오고있다. 교량공사는 수상공사, 육상공사로 나뉘고 다시 우물통기초, 교각, 상판공사로 분류될 수 있는데 상판공사 스틸박스거더, 콘크리트 박스거더 위에 설치되므로 물위에서 또는 땅 위에서의 높이가 수십m에 이르게 되어 추락했을 때 특히 위험하고 상판을 FCM공법으로 물위의 수십m 위에서 진행되는 경우가 대부분이다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.7-17
• /
• 2019

With increasing demand for large offshore infrastructures, suction cofferdams have been large, and the lid stiffener arrangement for a suction cofferdam has become a key element in cofferdam design to constrain the flexural deformation effectively. This study analyzed the changes in the structural behavior of a lid for a suction cofferdam due to lid stiffeners to provide insights into effective stiffener arrangements. By investigating conventional suction anchors, several stiffener patterns of a lid for a polygonal suction cofferdam were determined and analyzed. The structural performance of the stiffened lids was estimated by comparing the stress and deformation, and the reaction distributions on the edge of lid were investigated to analyze the effects of the stiffener arrangement on the lid-wall interface. Finite element analysis showed that radial stiffeners contribute dominantly to decreasing the stress and vertical deflection of the lids, but the stiffeners cause an increase in shear forces between the lid and wall; the forces are concentrated on the lid near the areas reinforced with radial stiffeners, which is negative to lid-wall connection design. On the other hand, inner and outer circumferential stiffeners show little reinforcement effects in themselves, while they can help reduce the stress and deformation when arranged with partial radial stiffeners simultaneously.

• Magazine of the Korea Concrete Institute
• /
• v.2 no.1
• /
• pp.101-108
• /
• 1990

An experimental and analytical invest.igation was conducted regarding the behavior of reinforced concrete skew bridge decb with Ontario-type reinforcement. A full-scale model repmsenting the essential behavior of a full skew bridge was built and tested. The test specimen had details similar to those required by the Ontario Highway Bridge Design Code, modified as recommended by the Texas State Highway Dopartment. The skuw bridge deck performed sati:,factorily under the current AASHTO design load le"els as well as the overload conditions(about :3 times the current AASHTO design wheel load). The skew edges failed by shear ; the center by punching shear. The calculated flexural capacity considering arching action always far exceeded the actual failure load (shear or punching shear) at each test location. To check the experimental results a detailed finite element model of the specimen was developed using a general-purpose structural analysis pmgram. Analytical predictions and exper'imental results agreed c1osuly.

• International Journal of Highway Engineering
• /
• v.4 no.1 s.11
• /
• pp.171-181
• /
• 2002

Guss asphalt used in pavement of a steel deck bridge may cause severe stress and displacement on the bridge as it is treated using very high temperatures ranging from 220oC to 260cC. Therefore, it is critical to estimate the thermal effect of Guss asphalt on the steel deck bridge before the width and pattern of the unit portion are decided in order to minimize impact. In this study, we have conducted a series of numerical analysis of the upper road of Youngjong Grand Bridge, verified the feasibility of numerical value analysis by comparing the results with the data measured, and studied the thermal effects of Guss asphalt on the steel deck bridge according to temperature changes.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.1
• /
• pp.27-33
• /
• 2016

A numerical analysis on deck wetness is carried out for a large caisson directly wet-towed by tugs in irregular waves. A constant panel method is used for linear analysis in frequency domain and a statistical post-processing for the deck wetness is presented. Hydrodynamic coefficients obtained from the frequency domain computation are imported for time domain analysis which enables complete modeling for towing equipment, environment, etc. Both frequency and time domain computations over two sea states are performed and comparison is made. In the time domain analysis, towing systems of various arrangements of tugs are investigated from short-term prediction for the largest deck wetness and the number of occurrences of deck wetness.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.593-604
• /
• 2007

Although composite construction has more mechanical advantages compared to noncomposite construction, the design of noncomposite construction for skew bridges with large skew angels has been often checked because composite construction may cause large stresses in the bridge deck. In this study, the analytical model considered dynamic behaviors for noncomposite skew bridges was proposed. Using the proposed analytical model, the validity of the application of noncomposite construction to skew bridges was checked. Also, the effects of interactions between the concrete deck and steel girders such as composite construction, partial composite construction, and noncomposite construction on the dynamic characteristics and dynamic behaviors of simply supported skew bridges were investigated. A series of parametric studies for the total 27 skew bridges was conducted with respect to parameters such as girder spacing, skew angle, and deck aspect ratio. Although the slip at the interfaces between the concrete deck and steel girders results in the reduction of seismic total base shear in the transverse direction due to period elongation, it causes an undesirable behavior of skew bridges by the modification in mode shapes and distributions of stiffness. Shear connectors placed by minimum requirements for partial composite action have an effect on reducing the girder stresses and deck stresses; except case of some skew bridges, the magnitude of the girder stresses and deck stresses obtained from partial composite skew bridges is similar to or slightly more than those acquired from composite skew bridges.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.78-84
• /
• 1998

Refractive index was matched using the inhomogeneous dielectric layers to enhance the optical transmittance of surface discharge type AC PDP. The transmittance of upper panel which had two index-matched inhomogeneous dielectric layers was measured as 85%, and this result is regarded as 15% better transmittance than that of conventional structure, which is about 70%.

• Product Safety
• /
• s.210
• /
• pp.15-15
• /
• 2011

지식경제부 기술표준원은 오는 10월 1일부터 가스레인지와 가스오븐레인지 유리상판의 관리온도 및 재료기준을 강화한다고 밝혔다.