• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.296-301
• /
• 1995

A single-mode erbium-doped fiber laser is constructed by using a intracore fiber Bragg grating and a unidirectional fiber loop mirror. The laser cavity is designed in such a way that the laser beam forms a travelling wave in the gain medium by placing the erbium-doped fiber inside the unidirectional loop and that the wavelength-selective feedback is made from the outside of the loop by a fiber grating with 0.2 nm reflection linewidth. An additional fiber ring resonator is constructed and used as an optical spectrum analyzer to observe the variation of the laser mode spectra. As the result, relatively stable single mode, single polarization output is observed for the most of the time except some mode hoppings in minute scale due to enviommental temperature variations. tions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.110-115
• /
• 2002

This paper proposes the adaptive fuzzy control system using the microprocessesor for high precision control of automation systems which exist non-linearities such as saturation, relays, hysteresis, and dead zones. The proposed system which provides the improvement in terms of the control region in transient and adaptive control, first used the frequence-locked mothed driving a system to generate a output voltage proportional to the frequency diffierence of relnence input signal and feedback signal for fast transient response,, and when the error reaches the preset value, used the adaptive fuzzy logic for precision control. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerable improved performance in the precision control of servo control systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4112-4118
• /
• 2011

Electrical Railroads provide electric power, which can operate vehicles, via feeder wires. And the supplied current returns to the transformer substation through lines and ground net. The return current, related to signal, power and power line, and track circuit systems, is one of the most important component in the electric railway. Therefore, to prevent system faults and breakdown according to unbalance and overcurrent of the return current, various and detailed analyses for the return current are needed. In the paper, we present measurement and analysis manners in real environment and evaluate its safety. For analysis, we utilize the measured values of return currents measured in track circuits in electric railway. we expect that this research plays a key role to the related fields.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.538-542
• /
• 2018

Echo generated in digital hearing aid vent give rise to user's discomfort. For cancelling feedback echo in vent, it is required to estimate vent impulse response exactly. The vent impulse response has time varying and sparse characteristics. The IPNLMS has been known a useful adaptive algorithm to estimate vent impulse response with these characteristics. In this paper, subband sparse adaptive filter which applying IPNLMS to subband hearing aid structure is proposed to cancel echo of vent by estimating sparse vent impulse response. In the propose method, the decomposition of input signal to subband can pre-whiten each subband signal, so adaptive filter convergence speed can be improved. And the poly phase component decomposition of adaptive filter increases sparsity of each components, and the better echo cancellation can be possible without additional computation. To derive coefficients update equation of the adaptive filter, by defining the cost function based weight NLMS is defined, and the coefficient update equation of each subband is derived. For verifying performances of the adaptive filter, convergence speed, and steady state error by white signal input, and echo cancelling results by real speech input are evaluated by comparing conventional adaptive filters.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.369-377
• /
• 1999

Recently, it is gradually raised necessity that thickness of thin film is measured accuracy and managed in industrial circles and medical world. Ultrasonic signal processing method is likely to become a very powerful method for NDE method of detection of microdefects and thickness measurement of thin film below the limit of ultrasonic distance resolution in the opaque materials, provides useful information that cannot be obtained by a conventional measuring system. In the present research. considering a thin film below the limit of ultrasonic distance resolution sandwiched between three substances as acoustical analysis model, demonstrated the usefulness of ultrasonic signal processing technique using information of ultrasonic frequency for NDE of measurements of thin film thickness. Accordingly, for the detection of delamination between the junction condition of boundary microdefect of thin film sandwiched between three substances the results from digital image processing.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.2
• /
• pp.55-59
• /
• 2010

Recently it is tried to use load control model for maneuver moving object. MIN design method proposed to solve control problem of nonlinear system using load concept. The Min design method shows direct method for finding control value on the load control model. In this paper, is shown realization free falling model using nonlinear load control model and analysis of load values acting falling object according to disturbance. And made a trajectory according to acting load values due to disturbance. This paper's result is able to be applied to design algorithm for improvement accuracy of MLRS, GPS air-to-surface missile(ASM) and returning spacecraft with nonlinear model predictive control.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.145-159
• /
• 2004

A mathematical model and its computer solution program were proposed to analyze the motion of contact lenses which are being subject to lid-blinking. The equation was derived by incorporating an acceleration induced lid's force exerting on the contact lens, the viscous damping resistance in the tear layer beneath the lens and the sliding frictional force between the lid and the contact lens surface into the formulation of differential equation describing the vibration. The model predicts the time-dependent displacement from the equilibrium postion during/after the blinking. During the blinking, as the time for the completion of one cycle of blinking decreases the off-the-equilibrium displacement of contact lens increases while the decrease of diameter in the contact cause the opposite effect. It is found that lid pressure exerting on the lens cause an insignificant lens displacement from the equilibrium position. After blinking the frequency of damped oscillation of contact lens decreases as the diameter of lens increases, due to the incresed surface while the reduced blinking time does not cause a significant frequency change. This is because that driving force for the contact lens movement posterior to blinking is the capillary-induced force not the lid force.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.9
• /
• pp.526-532
• /
• 2015

A bioreactor filling with pellets and stones was equipped to the swine manure treatment system, which is expected to emit high concentration of odor in the process of the organic wastewater treatment system, and in comparison with the activated sludge process as the control process, the reactor operation state, treatment water quality and odor emission concentration were measured. The reactor using the bioreactor proved to be much more stable in the bubble condition, treatment water transparency, etc, and BOD removal efficiency was also much better. The removal efficiency of T-N and T-P, however, showed little difference in the two reactors. Odor, as a result of examining $NH_3-N$, $NH_3$ concentratio, and complex odor, was 4 times to 24 times less emitted in the system using bioreactor than in the activated sludge system. $H_2S$, methyl mercaptan, dimethyl sulfide, and dimethyl disulfide were not found or were found in only 5 ppbs in each reactor and showed little difference between the two reactors. In the bioreactor process, Bacillus sp./ Pseudomonas sp. species were mainly found and in the activated sludge process, acterium sp. Chryseobacterium sp. species were mainly found.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.236-246
• /
• 2014

Most countries have been promoted the legislative policy for the legal employment, causing a social conflicts by illegal immigrants in any countries. Despite the efforts to alleviate the illegal aliens, there are not nearly enough successful cases, and encounter a social problem about illegal stay worker. China is no exception. At present, the issue of China's foreign illegal employment is expected to be a social problem in the present and the future. However, the legislative policy against immigration control law and illegal foreign employment in China is very neglectful. There is a lack of adjusting rule of law on illegal foreign workers in China, and the remedy is also insufficient. It is necessary to secure a legal right for the protection of the Rights of illegal foreign workers based on the international norms. For this purpose, the illegal foreign workers related law should be enacted, and based on this, administration should be strengthened. The trend of major countries of illegal aliens is centered around an employer hiring strictly regulated. There is a need to have a strengthen regulation on the employer rather than the foreign workers in China. To this end, employer who hire illegal foreign workers should be required to receive considerable disadvantages such as penalties and fines, prison sentences, as well as various kinds of burdens and repatriation costs. It is necessary to run the voluntary repatriation(Freiwillige $R\ddot{u}ckehr$) program of illegal immigrants, and there is a need to take action for illegal immigrants who voluntary return home within a certain period are exempt from penalty. In conclusion, China must push ahead with a direction of positive policy in related ministries rather than sit on its hands on the wrong choice or a confusion of an employer and foreign workers with a policy on illegal foreign residents in limbo.

• Journal of Popular Narrative
• /
• v.26 no.2
• /
• pp.191-219
• /
• 2020

This paper aims to identify the key features of the novel writing of Korean American immigrants and their meaning as one aspect of movement and contact occuring in the early modern period. The late return of the novels written by Nakcheong THUN in the 1930s is significant in that it restored ideas on the diversity of early modern mobility and confronted the history and culture of immigrants who were excluded from records and memories. Not only are these novels a product of the phenomenon of immigration, but they have also created a crack in the dichotomous perceptions of domination and subordination, center and periphery by envisioning it as a space that creates new history, culture, institutions and values. These novels treat the free love of intellectual, emotional, and ethical figures as a central event, demystifying Western free love, and at the same time, a society divided by various identities including class, race, and gender. The novels by Nakchung THUN visualize the active exchange between the immigrant and the indigenous community through the character of Jack, and imagines the heterotopia as a place where not for the immigrants' utopia, but for everyone's coexists. These novels have declared a kind of memory war on the subordinate and marginalized contact zones. The contact zones of the immigration area had been a place for experiencing extreme conflicts and discords, and at the same time, it has served as a place where various groups and communities are connected. The contact zones were common areas of solidarity and creation before being subject to division and occupation. The contact zones are far from the border or borderlands, so it is not a fixed and immutable deadlock. As a world free from central domination the contact zones have been a space that preoccupied history and culture through various encounters, and have been a community.