Journal of Korean Society of Archives and Records Management
/
v.4
no.2
/
pp.1-22
/
2004
This study is about the paper of Mulberry(桑紙). The paper which was usually applied to the ancient bookpaper and documents. But there is a rare record about it today. So the paper was made from the Mulberry(뽕나무) bast fiber using traditional handcraft method. and Paper Mulberry(닥나무) by traditional method. And tested by physical and optical methods in comparisons with Paper Mulberry(닥나무). The ratio of length/width of Mulberry fiber was 475, and its lignin content was lower than the Paper Mulberry. The Mulberry paper had similar forming properties and physical strength to the Paper Mulberry fiber. Therefore, the Mulberry fiber seem to be a good paper fiber for traditional paper. For the aging test, in the thermal acceleration treatment for 72 hours and 144 hours at the temperature of $105^{\circ}C$ incubator, the Mulberry paper was more deteriorative than the Paper Mulberry. In the ultraviolet acceleration treatment for 100 hours and 200 hours the Mulberry paper was less interior to the Paper Mullberry, in the increase of treatment time. And the Mulberry paper was approved to be a good traditional paper in appearance. Furthumore, in considing the sample of bred Mulberry species grown today, its paper is thought to be superio to the paper of Paper Mulberry in symptom of senility in natural ultraviolet light.
Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
2001.04a
/
pp.159-159
/
2001
용수 다소비 산업인 제지산업은 날로 심해지는 환경규제에 대처하기 위해 청수사용 량을 줄이고 백수의 재활용을 극대화하며, 궁극적으로는 폐수를 배출시키지 않는 무방류화 공정의 실현을 위해 많은 연구와 노력을 경주하고 있다. 제지공정의 폐쇄화가 성공적으로 이루어지기 위해서는 폐수의 처리를 통한 수질 개선 및 처리수의 재활용을 제고하는 방안을 채용할 수 있으나, 제지공정의 막대한 용수 사용량을 생각할 때 방출되는 공정수를 이와 같 은 방법으로 완전히 정화, 재사용한다는 것은 경제적으로 비현실적이라 할 수 있다. 따라서 공정수의 정화 및 정화된 처리수의 재활용율 제고를 통하여 제지공정의 무방류화를 실현하 더라도 공정수의 수질 악화는 필연적으로 발생하게 되며 따라서 이에 대한 다각적인 대처 가 요청된다. 제지공정의 무방류화에 따른 수질의 악화는 용수 내 미세분 및 이온성 물질의 누적 을 통해 이루어지며, 이로 인해 펠트 플러깅, 첨가제의 성능저하, 슬라임 및 악취 발생, 제품 의 품질저하 등 여러 가지 문제들이 발생하게 된다. 본 연구에서는 백상지 공정의 폐쇄화를 실험실적으로 재현하여 용수 내 미세분 및 각종 이온성 물질의 누적이 종이의 불성에 미치는 영향을 평가하고자 하였다. 백상지 공정 수 내에는 도공파지의 유입과 다량의 충전제 사용에 의하여 상당량의 회분성분이 미세분으 로 포함되어 있다. 이에 백상지 공정의 폐쇄화 단계에 따라 용수 내 누적되는 회분의 특성 변화를 파악하고, 이것이 종이 물성에 대한 영향을 살펴보았다. 또 백수의 재활용에 따른 각 종 이온성 물질의 누적이 종이의 물성에 미치는 영향도 평가하였다. 이러한 이온성 물질의 대상은 칼습 경도 및 전기전도도에 영향하는 무기 이온성 물질과 COD 및 BOD에 영향하는 유기 이온성 물질로 구분하여 평가하였다. 이후 계내에 존재하는 각 이온성 물질의 농도 증 가에 따라 종이를 제조하여 물성의 변화를 파악하였다.
Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
2001.04a
/
pp.201-205
/
2001
본 연구에서는 한지가공공정의 하나인 도침공정을 현대의 칼렌다링 공정과 비교 분석을 실시한다. 도침은 커다란 나무뭉치를 사용하여 반복적으로 여러 장이 겹쳐 진 한지를 두두림으로서 한지 표면을 평활하게 하며, 광택도를 높이는 효과를 볼 수 있다. 나무뭉치는 밑면이 평활해야만 할 것이다. 보통 한지 제조업자들은 경험 을 토대로 얼마만큼의 도침이 필요한지 결정하고 실시하곤 한다. 이러한 도침공정 에서 현대의 칼렌다링이 할 수 없는 중요한 공정이 존재한다면, 현대의 초지기에도 이러한 원리를 적용함으로써 효과적인 종이의 품질개선을 이룰 수 있는 여지가 충 분히 있다고 판단된다. 한지에 있어서 도침의 역할이 무었인지, 도침은 칼렌다링으 로 대치할 수 있는 지 둥을 비교 검토하였다. 도침공정 연구를 위하여 라이너지 한 종류, 백상지 한종류, 최근에 제조된 전통 한지 세 종류를 사용하였다. 라이너지와 백상지는 일반 제지공장에서 제조되는 방 식을 그대로 사용하여 기계 칼렌다를 통과한 샘플을 얻었으며 칼렌다를 통과하지 않은 라이너지와 백상지를 특별히 같은 지종에서 얻어서 실험을 실시하였다. 기계 칼렌다링을 하지않은 라이너지와 백상지 세 종류의 전통한지는 실험실 칼렌다를 통과시켰고, 또 각각에 도침을 실시하였다. 샘플들의 기본 물성과 처리조건을 표 1 에 정리하였다. 도침 공정에서 사용한 나무 뭉치의 무게는 약 64Kg 이며, 최대 높이 41cm 로 들어올려져 자유낙하에 의한 충격을 종이에 가하였고, 분당 충격횟수는 63회 였다. 라이너지는 도침 및 칼렌다에 의해 밀도가 서서히 증대되는 것을 볼 수 있었다 (그림 1). 도침은 칼렌다에 비해 밀도 증대에 효과적이지는 못하였다. 반면 백상 지에서는 도침이 기계 칼렌다나 실험실 칼렌다보다 현저히 크게 밀도를 증대시킴을 볼 수 있었다 (그림 2). 칼렌다는 종이를 높은 전단력과 압축력으로 변형시키는데 비해 도침은 단순히 압축 압력만을 종이에 가하는 것이 다르다고 볼 수 있는데, 라 이너지와 백상지가 같은 조건하에서 왜 이러한 큰 차이를 보이는 이유를 아직 알수 없다.
Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
2001.11a
/
pp.45-45
/
2001
종이 표변에 전분 사이징을 하는 목적은 종이가 액체에 대하여 침투저항성을 부여하 여 종이의 인쇄적성을 향상시키며 아울랴 종이의 표면적성과 종이강도 등의 물리적 특 성을 향상시키기 위해서 사용된다. 표면 사이징은 기본적으로 종이 표면에 전분을 이용 한 필름을 형성하여 종이 표면의 공극크기를 줄여 인쇄잉크 등과 같은 액체의 침투속 도를 늦여준다. 현재 국내에서 널리 사용되는 표면 사이징용 전분으로는 산화전분과 자 가변성용 일반전분이 있다. 자가변성용 전분은 효소나 APS로 전분의 chain 길이를 적 당한 점도로 잘라주는 것으로 전분 호액의 노화가 쉽게 일어나는 경향이 있다. 산화전 분은 전분회사에서 산화제를 이용하여 전분의 점도를 사용자의 요구에 따라 조절한 것 으로 water holdout이 개선되고 자가변성용 전분보다는 노화 안정성이 개선되지만 종 이 내부로의 칩투가 많이 일어나 전분 필름 강도가 약해지며 표면 강도 향상 효과가 적고 종이의 광학적 특성을 저하시키는 단점을 지니고 있다. 또한 약 10 ~ 20% 정도 사 용되는 파지의 재활용시 펄프 섬유에 흡착되지 않는 전분으로 인해 백수 내의 COD 및 B BOD를 증가시키는 원인이 된다.따라서 본 연구에서는 펄프 섬유와 친화력이 높아 지료 내첨용 지력증강제로 널리 사용되고 있는 양성 전분의 양이온 치환도 및 점도를 사이즈 프레스에 적합하게 조절 하여 백상지 제조업체의 라언에 적용하였다. 결과분석 항목으로는 파지 재활용에 따른 백수내 COD, 칼숨 이온함량 등의 백수 시스템의 변화와 종이의 물리적, 광학적 특성 및 ink jet 용지의 인쇄적성 등을 측정하여 산화전분과 비교하였다. 그 결과 약 20%의 C COD 감소 효과와 10%정도의 OPR 향상 효과를 얻을 수 있었다. 종이 물성의 경우 인 장강도와 뺏뺏이(stiffness) 및 지분 등을 측정한 결과 산화전분 보다 향상되었다. 특히 지분의 경우, 참여한 회사의 지분관련 complain이 약 80% 정도 감소하는 결과를 나타 내었다. 또한 백상지의 경우 ink jet 프린터에 많이 사용됨으로 ink jet 프린터의 인쇄 적성을 image analyzer로 측정한 결과 산화전분 보다 향상된 결과를 나타내었다.
Han, Sien-Ho;Lee, Sang Kyu;Shin, Hyun Chang;Kim, Hojin
Applied Chemistry for Engineering
/
v.25
no.4
/
pp.374-379
/
2014
After completing deacidification process and evacuating rest of solvent, white fine particles of MgO are found on the surface of archival materials, such as books and documents. When MgO particles remain on the surface of archives, instead of being well dispersed and absorbed into cellulose fiber of archives, such white fine particles are found. These particles have raised concerns for employees' deacidification environment and their health; however, the concerns have not been addressed. To find the cause of white fine particles on the surface of archives after deacidification process and to propose the its solution, an acidic paper and wood free paper were applied with deacidifying chemicals. We analyzed the domestic and abroad deacidifying chemicals' physical properties and conducted deacidifcation processes to find effects of different contents and sizes of MgO on white fine particles. When the size of MgO particle was 847 nm, there was significantly less amount of white fine particles on the surface of archival materials. This means that the size of MgO particle plays a significant role in producing white fine particles on the surface of archives.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2008.11a
/
pp.225-225
/
2008
PLZT 박막을 Pt/Ti/$SiO_2$/Si 기판 위에 RF-마그네트론 스퍼터링방법으로 형성할 때 기판온도에 따른 PLZT 박막의 결정성과 전기적 특성 및 강유전 특성에 미치는 영향에 관하여 연구하였다. 하부전극 Pt와 PLZT 박막 사이에는 완충층으로 $TiO_2$를 사용하여 계면에서의 상호확산을 제어하면서 우수한 물성의 PLZT 박막을 얻고자 하였으며, 여러 기판온도에서 PLZT 박막을 증착한 후, 박막의 결정화를 위해 급속열처리법으로 $700^{\circ}C$로 후열처리하였다. 그 결과 기판온도 $400^{\circ}C$에서 증착한 PLZT 박막이 가장 우수한 특성을 나타내었으며, 이때의 잔류분극과 누설전류밀도는 각각 15.8 ${\mu}C/cm^2$, $5.4\times10^{-9}A/cm^2$ 이였다. 그러나 $500^{\circ}C$에서는 결정립 조대화현상이 나타나면서 잔류분극과 누설전류밀도는 9 ${\mu}C/cm^2$, $3.09\times10^{-7}A/cm^2$로 특성이 저하되었다.
As the demand for paper continues to grow and the importance of recycled paper, white ledgar(WL) and old newspaper pulp(ONP), continuously increase. In addition, usage of recycled paper is essential in terms of forest conservation and environmental protection issues. However, optical and mechanical properties of recycled paper have some drawbacks than regular paper's properties that is indispensable. In order to complement these problems of recycled paper, precipitated calcium carbonate (PCC) was synthesized by the In-situ process with a recycled pulp. Depending on the size of PCC is divided into 2 types, $0.01{\mu}m{\sim}0.09{\mu}m$ colloid type ultra-fine particle and $0.1{\mu}m{\sim}0.9{\mu}m$ cubic type particles. In this study, we analyze how the different shape and size of precipitated calcium carbonate affects in the optical and mechanical properties of the recycled paper used as a filler. Furthermore, we mixed with chemical pulp for overcome reduce of mechanical properties, without using other chemicals, when we use PCC as a filler. The results has the possibility to meet in GR excellent recycling certification mark, standard was proposed.
Park, Sung-Dae;Chung, Gong-Soo;Jeong, Ji-Gon;Kim, Won-Sa;Lee, Dong-Woo;Song, Moo-Young
Journal of the Korean earth science society
/
v.21
no.5
/
pp.563-582
/
2000
Two Cretaceous(80-90 Ma) non-marine sedimentary basins, Namyang and Tando Basins, are distributed in the Namyang area, Hwaseonggun and in the Tando area, Ansanshi, Kyungki Province, Korea. The Namyang and Tando Basins are composed of 10 facies, which are pooped into 5 facies associations(FA). FA I consists of massive conglomerate facies, normally graded conglomerate facies and reversely graded conglomerate facies, which is interpreted to have been formed by laminated sandstone facies, massive conglomerate facies(channelized), which is thought to have been formed by sheet flow, stream flow and suspension sedimentation in an alluvial/braided plain environment. FA III consists of massive mudstone(pebbly) facies, laminated mudstone facies, massive sandstone facies and is interbedded by channel-fill conglomerate. It is interpreted to have been deposited by suspension settling during flooding and channel-fill deposition in a floodplain environment. FA IV consists of massive conglomerate facies, normally graded conglomerate facies, massive sandstone facies, normally graded sandstone facies, and laminated sandstone facies and is interbedded with mudstone facies. It is thought to have been deposited by debris flow and turbidity current in a fan-delta environment. FA V consists of massive mudstone facies, laminated mudstone facies, laminated sandstone facies and is interbedded by massive conglomerate bed. It is thought to have been formed by suspension sedimentation and low-density turbidity current in a lake. In the Namyang Basin FA I is distributed in the eastern and southern margin of the basin, FA II in the middle part of the basin as north-south tending band. and FA III in the western part. In the Tando Basin FA II is distributed in the middle part of eastern margin and in the northwestern margin, FA IV in the southwestern part, and FA V in the central part. Correlation of the facies associations shows that FA I and II in the Namyang Basin are distributed in the lower to middle part of stratigraphic sequence and FA III in the upper part of the sequence whereas FA II and IV in the Tando Basin are in the lower to middle part and FA V in the upper part of the sequence. These patterns of facies associations distribution suggest that the Namyang Basin was developed as an alluvial fan and alluvial/braided plain at first and then evolved into a floodplain whereas the Tando Basin was developed as a fan-delta and alluvial/braided plain at first and then evolved into a lake environment.
Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
2001.11a
/
pp.54-54
/
2001
지필의 수축 현상은 섬유의 특성, Forming 공정에서 섬유배향Drying, 온도조건, Size P Press Y- Coating 공정 에서 Rewetting, 공정 중의 Tension, Draw등에 의 해 영 향을 받게 된다. 특히 Drying 공정에서는 지필 수분이 증발하면서 섬유의 자체 수축 및 섬유결합 부의 Micro compression이 발생하게 된다. 그리고 Draw, Canvas Tension, Cylinder 온도둥과 같은 공정 조건의 변동에 따라 지필 수축률의 차이가 발생하며 제품의 M MD/CD의 강도적 특성 및 칫수안정성 컬등의 품질과 상관성을 갖는다. 일반적으로 제 품의 신축률을 측정하는 일반적인 방법은 Reel 샘플을 일정시간 침수하여 종이 내부의 응력을 제거한 후 전후의 치수 차이를 비교하는 것이다. 그러나 이 방법을 통해서는 실 질적으로 Dryer 내부의 어느 단계에서 어느 정도의 수축이 발생하는지를 판단할 수는 없다. 본 연구는 Dryer에서 Reel 까지의 종이 수축 변화를 On - Line상에서 직접 측정한 적 용 사례와 공정 조건에 따른 지필 수축의 변화를 측정한 결과에 대한 것이다. 여기서 사용된 On-Line 지필 수축기는 직진성의 레이저를 이동식 지지대에 설치하여 전/후측 의 지필과 Cy linder 양끝의 거리 차이를 측정하여 지필의 폭을 계산할 수 있도록 자체 개발하였다. 이 설비를 이용하여 Dryer 내부에서 지필 수축이 급격이 일어나는 C Cylinder 군을 찾아 스팀압력과 Bel Run의 진공도, Canvas Tension, Draw 공정조건을 조정하였고 결과적으로 제품의 신축률 개선 효과를 가져올 수 있었다. 본 연구에서 개발한 On-Line 지필 수축 측정 기법은 종이 칫수 안정성과 관련하여 향후 공정 최적화 작업의 진단 도구로서 적극적으로 활용할 수 있을 것으로 기대된다.었다. 특히 지분의 경우, 참여한 회사의 지분관련 complain이 약 80% 정도 감소하는 결과를 나타 내었다. 또한 백상지의 경우 ink jet 프린터에 많이 사용됨으로 ink jet 프린터의 인쇄 적성을 image analyzer로 측정한 결과 산화전분 보다 향상된 결과를 나타내었다. 있다 고 사료되었다.칼비터에 의한 고해나 큰 물성적으로 큰 차이를 보이지는 않고 있 었다. 단지 섬유의 차이가 고해방식의 차이보다 월등히 크다는 사실을 보이고 있다 이러한 점은 섬유장의 길이에서도 볼 수 있다. 칼비터가 섬유를 절단하기만 하고 닥방망이 고해가 섬유장의 변화를 일으키지 않는다면 틀림없이 평균 섬유장의 차이가 생길것이다.의 여수도가 7 70% 이상 개선되는 것으로 나타났다.측정하였다. 또한 카르복실기 정량과 종이의 pH 측정 및 X -ray Diffractometer를 이용하여 결정화도를 측정하였다. 본 연구의 결과, 시간의 경과에 따라서 탄소의 결합에너지는 분포가 C-H에서 COO-, 또는 C=O로 달라짐으로써 종 이가 산화되고 있다는 것을 알 수 있었다. 또한 이 결합에너지 분포의 변화가 펄프의 종류 에 따라서 다르게 이동함으로써 제조된 시트의 표면 산화반응이 서로 다르게 일어나고 있음 을 알 수 있었으며, 이는 사용한 펄프의 화학 조성분의 차이에 기인한 것이라 사료된다.>NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that of control.
The purpose of this study was to investigate the quality characteristics and antioxidant activity of black rice muffins prepared with various concentrations of chito-oligosaccharide(0, 0.5, 1.0, 1.5, 2.0%). The the weight of the groups with chito-oligosaccharide was higher than that of the control group, but the height, volume, and specific volume of the groups with chito-oligosaccharide were lower than those of the control group. The moisture contents increased with the addition of chito-oligosaccharide. The pH decreased significantly with the addition of chito-oligosaccharide. The L value of Hunter's color decreased, but the a and b value increased significantly with the addition of chito-oligosaccharide. The muffin without the chito-oligosaccharide was the highest hardness. The textural properties revealed the cohesiveness, chewiness, and brittleness of groups with chito-oligosaccharide increased significantly with the addition of chito-oligosaccharide. Antioxidant activities of muffins increased as the amount of chito-oligosaccharide increased.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.