• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.05a
• /
• pp.81-85
• /
• 2002

Small angle light scattering and field emission scanning electron microscope have been used to quantify the kinetics of liquid-liquid separation behavior during water vapor(RH52%[$\pm$3%] at 27$^{\circ}C$) quenching (non-solvent induced phase separation, NIPS) of polysulfone/NMP/Alcohol and CPVC/THF/Alcohol, respectively. Time dependence of the position of the light scattering maximum was observed at polysufone dope solutions, confirming spinodal secomposition (SD). while CPVC dope solutions showed a decreased scattered light intensity with a increased q-valuel, indicating nucleation & growth (NG). For the each system, domain growth rate in the intermediate and late stage of phase separation decreased with increasing the number of carbon of alcohol used as additive (non-solvent). Also, in the early stage for SD, the scattering intensity with time was in accordance with Cahns linear theory of spinodal decomposition,[1-3] regardless of types of non-solvent additive.

• Membrane Journal
• /
• v.11 no.2
• /
• pp.89-95
• /
• 2001

Polysulfone membranes containing an inorganic fluor, cerium activated yttrium silicate (CA Y5), were prepared via the phase inversion technique. The casting solutions with the fluor' were solidified to result in a membrane by using two different nonsolvent coagulants, water and isopropanol. In the process, the fluor worked as a monitioring agent for investigating the characteristics of the phase inversiun process. On the initial contact with water as nonsolvent, the induction of rapid polymer collapse results.in the entrapment of the fluor in the formed membrane structure. Impregnated fluor is dispersed in the polymer structure rather than being enveloped by polymer molecules. In comparison, the fluor is localized in the cell-like structure of membrane, as the cast solution film is cuagulated by immersion into a isopropanol bath.

• Membrane Journal
• /
• v.19 no.2
• /
• pp.104-112
• /
• 2009

Ultrafiltration membranes (UF) were manufactured by the conventional phase inversion method using an additives with N-methyl-2-pyrrolidinone as a solvent. Characteristics of performance could be controlled by the preparation conditions and the operating methods. The fouling resistance was observed by the relative ratio of permeate flux $(J_t)$/pure water flux $(J_o)$. Compared with the anion charged membranes and its original polyamide membrane, fouling resistance to the protein was increasing in proportion to the ion exchange capacity. The relative flux for the bovin serum albumin (BSA) solution increased as pH value further away from isoelectric point of BSA. The hydrophilicity of a membrane, the pH condition, and the operating temperature played the important role in the membrane permeations.

• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.158-158
• /
• 1999

The post ion implantation has been applied to modify early-grown BN layer and improve the adhesion of the BN films. The effect of ion implantation doses on microstructure and interlayer was investigated by FTIR and HRTEM. And the hardness and delamination life time of N+-implanted BN films were measured. With increasing the ion dose up to 5.0×1015atoms/㎠, the change of IR spectrum is observed. At 5.0×1016atoms/㎠, a drastic transition of cubic phase into hexagonal phase is detected. The change of microstructure of early-grown layers by ion implantation is confirmed using HRTEM. Both microhardness and delamination life time of BN films increase with ion dose. The modification model of early-grown BN layers is briefly discussed based on the displacement per atom and excess boron in the BN film induced by ion irradiation.

• Membrane Journal
• /
• v.12 no.4
• /
• pp.240-246
• /
• 2002

New polysulfone scintillation proximity membranes were prepared by impregnating Cerium Activated Yttrium Silicate (CAYS), an inorganic fluor, in a membrane structure. The membranes were applied to detect the radionuclide contamination directly without the aid of a scintillation cocktail. The preparation of membranes was divided into two processes. A supporting polymer film was made of casting solutions consisting of polysulfone and solvent, their cast film being solidified by vacuum evaporation. CAYS-dispersed polymer solutions were cast over the first, solidified polymer films and coagulated either by evaporating solvent or by exchanging solvent in the solution with nonsolvent in a coagulation bath. The prepared membranes had two distinguished, but tight1y attached, double layers: one is the supporting layer of dense polymer film and the other the detecting layer consisting of CAYS and polymer. The radionuclide counting results revealed that the prepared membranes were efficient to monitor radioactivity contamination with reliable counting ability.

• Membrane Journal
• /
• v.14 no.1
• /
• pp.26-36
• /
• 2004

Ultrafiltration membranes based on anion charged poly(bis[4-(3-aminophenoxy)phenyl]sulfone pyromellite) imide derivatives (ACPI) were prepared by the phase inversion method. The polymers have good solubility in aprotic polar solvents. The composition of casting solution and the casting conditions played an important role in determining the permeation characteristics of membrane because the membrane structure could be controlled by the preparation conditions. The extent of fouling-repression was observed by the relative ratio of permeate flux ($J_t$)/pure water flux ($J_0$) and the membrane filtration index (MFI). The characteristics were measured by aqueous solution of bovine serum albumin (BSA) over a pH range of 2.5-9.0. The ACPI membrane having a hydrophilic property was less fouled than the membrane prepared from the original polyimide. With increasing the ion exchange capacity of ACPI membrane, th $\varepsilon$ relative ratio of flux was higher while the membrane filtration index was lower as compared with the original polyimide membrane. From the further away from isoelectric point of bovin serum albumin, the permeation was higher as well as the formation of fouling was more diminish. ACPI membranes having various their properties could be obtained. Further, it was proved that their permeation properties could be determined from the preparation conditions, various operating conditions, and dim $\varepsilon$ rent ion exchange capacity of anion charged polyimide derivatives.

• Membrane Journal
• /
• v.11 no.4
• /
• pp.170-178
• /
• 2001

PVC microfiltration membrane was prepared by phase immersion method and applied to membrane bioreactor (MBR) contained activated sludge. The hydrophilicity of membrane and the pore size increase with the amount of additive(PVP) ducting the preparation of membrane. Permeation characteristics and the membrane fouling behavior were investigated by varying the internal environment in MBR using the prepared membranes. When there is a sludge bulking in MBR caused by microorganism, membrane fouling was accumulated. The cake layer resistance, R$_{c}$, of membrane increased in the order of CP-0 > CP-1.0 > CP-1.5. Rc increased up to 3.5~7 fold where the sludge bulking occurred in MBR. CP-1.5 seems to be appropriated membrane on the basis of the surface characteristics and the flux. The average flux of all the test membrane was 12(${\pm}$2) L/$m^2$hr whereas the COD removal efficiency was 98.8%. The ratio of bulking sludge and the type and the size of microorganism in operating MBR accelerate the membrane fouling and flux decline. It is concluded that the characteristic of membrane filtration depends on the hydrophilicity of membrane, the internal environment of MBR reactor and the growth factor of sludge.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.73-74
• /
• 2017

본 논문에서는 H7 인버터와 DPWM 기반의 개선된 변조 기법을 이용한 2-레벨 인버터의 커먼 모드(Common Mode) 전압 저감 방법을 제안한다. 기존의 H7 인버터를 이용한 커먼 모드 전압 저감 방법은 스위칭 신호 구현을 위해 추가적인 논리회로가 필요하고, 일부 영역에서 커먼 모드 전압 저감이 이루어지지 않는 문제점이 있다. 제안하는 방법은 옵셋(Offset) 전압을 이용한 변조 방식을 사용하여 3상 인버터의 스위칭 신호를 생성하고, 3상의 지령 값을 이용하여 7번째 스위치의 스위칭 패턴을 결정한다. 이를 통해 추가적인 논리 회로 없이 하나의 캐리어만을 이용하여 모든 스위치의 스위칭 신호를 구현하며, 모든 영역에서 커먼 모드 전압 저감이 이루어지도록 하였다. 제안된 방법의 커먼 모드 전압 저감, 출력 상전류 왜곡 특성에 대한 성능을 시뮬레이션을 통해 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1357-1358
• /
• 2007

본 연구에서는 상변화 메모리 소자의 상변화 재료의 두께에 따른 열전달 현상과 지우기 전류의 변화량을 3차원 유한요소 해석 도구를 이용하여 해석하였다. 상변화 메모리의 하부전극과 상변화 소자의 접촉 부분에서 발생한 주울열은 상변화재료를 통해 상부전극 텅스텐으로 전달되어 외부로 빠져나간다. 상변화 재료 박막의 두께가 $200[{\AA}]$인 경우는 상부전극을 통해 빠져나가는 열이 커지게 되어 상전이를 일으키는 지우기 전류가 크게 증가하는 특성을 보인다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.30.1-30.1
• /
• 2009

PZT(Pb(Zr, Ti)$O_3$ 압전세라믹스는 뛰어난 압전 특성과 강유전 특성을 가지고 있어서 현재 널리 사용되고 있다. 하지만 PZT세라믹스는 큐리온도 이상에서 그 특성을 잃게 되고 높은 온도에서의 응용이 제한된다. 따라서 높은 큐리온도를 가지는 압전체를 개발하기 위한 연구가 많이 이루어지고 있다. $PbTiO_3$의 경우에는 $Bi(Zn_{0.5}Ti_{0.5})$, $BiFeO_3$등의 Bi계 세라믹스를 치환하면서 큐리온도가 올라가는 결과가 보고되고 있다. 하지만 이것은 PZT세라믹스 보다 압전 및 유전 특성이 상당히 낮다. 따라서 본 연구에서는 $(1-x)PbZrO_3-xPbTiO_3$조성에 Bi(Me)$O_3$(Me:Zn, Ti, Fe, Al)를 치환하여 압전특성 및 강유전 상전이 온도를 조사하였다. 모든 시편들은 고상반응법으로 제조하였고, 제조한 시편으로 조성에 따른 압전특성 및 유전특성의 변화를 측정하였다. 그리고 이를 통해 큐리온도는 PZT의 MPB조성근처에서 Bi계 세라믹의 치환은 $T_C$가 낮아 졌으나, Tetragonal 상을 가지고 있는 Ti-rich인 조성에서는 $T_C$가 높아지는 것을 관찰하였다.