• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.447-451
• /
• 1995

The purpose of this study was to investigate the effects of cleft on mesiodistal dimensions of permanent teeth in unilateral cleft lip and palate patients. Mesiodistal dimensions of permanent teeth were measured to the nearest 0.01mm on plaster models of 50 subjects with unilateral complete cleft lip and palate, 10 siblings and 50 Controls. The results were as follows : 1. Tooth size discrepancy in the cleft group was significant in all regions except maxillary cuspid, mandibular cuspid and mandibular first premolar. 2. Some of the mesiodistal dimensions of the teeth on the cleft side were significantly smaller than those of their antimeres on the non-cleft side in the cleft group. 3. A comparison of mesiodistal dimensions of the teeth for the right and left sides of the control group showed no statisically significant differences excepts maxillary lateral incisor. 4. Asymmetries of mesiodistal dimensions of the teeth in the sibling group was not found except maxillary first molar.

• Journal of Veterinary Clinics
• /
• v.33 no.1
• /
• pp.25-29
• /
• 2016

Three Maltese dogs, 5 to 7 months old, were admitted to the Veterinary Medical Teaching Hospital, Chonnam National University with malocclusion including Class IV mesiodistocclusion. In the first case, the treatment was performed by moving the mandibular canine teeth caudally with orthodontic buttons and Masel chains. The second patient was treated for rostroverted mandibular canines using buttons and chains. When distal movement of the mandibular canine teeth was completed, a maxillary arch wire with finger springs was applied to push the incisor teeth forward. In the third case, the treatment began by moving the mandibular canine teeth caudally with buttons and chains. An arch wire with finger springs was applied at maxilla to move the maxillary incisor teeth labially. Additionally, the mandibular incisor teeth were moved lingually by an elastic band attached to the buttons cemented to mandibular canine teeth. As a result, all patients successfully regained a normal occlusion.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.209-223
• /
• 2001

At intrusion of upper anterior teeth in patient with periodontal defect, the use of three-piece base arch appliance for pure intrusion is required. To investigate the change of the center of resistance and of the distal traction force according to alveolar bone height at intrusion of upper anterior teeth using this appliance, three-dimensional finite element models of upper six anterior teeth, periodontal ligament and alveolar bone were constructed. At intrusion of upper anterior teeth by three-piece base arch appliance, the following conclusions were drawn to the locations of the center of resistance according to the number of teeth, the change of distal traction force for pure intrusion and the correlation to the change of vertical, horizontal location of the center of resistance according to alveolar bone loss. 1. When the axial inclination and alveolar bone height were normal, the anteroposterior locations of center of resistance of upper anterior teeth according to the number of teeth contained were as follows : 1) In 2 anterior teeth group, the center of located in the mesial 1/3 area of lateral incisor bracket. 2) In 4 anterior teeth group. the center of resistance was located in the distal 2/3 of the distance between the bracket of lateral incisor and canine. 3) In 6 anterior teeth group, the center of resistance was located in the central area of first premolar bracket .4) As the number of teeth contained in anterior teeth group increased, the center of resistance shifted to the distal side. 2. When the alveolar bone height was normal, the anteroposterior position of the point of application of the intrusive force was the same position or a bit forward position of the center of resistance at application of distal traction force for pure intrusion. 3. When intrusion force and the point of application of the intrusive force were fixed, the changes of distal traction force for pure intrusion according to alveolar bon loss were as follows :1) Regardless of the alveolar bone loss, the distal traction force of 2, 4 anterior teeth groups were lower than that of 6 anterior teeth group. 2) As the alveolar bone loss increased, the distal traction forces of each teeth group were increased. 4. The correlations of the vertical, horizontal locations of the center of resistance according to maxillary anterior teeth groups and the alveolar bone height were as follows : 1) In 2 anterior teeth group, the horizontal position displacement to the vortical position displacement of the center of resistance according to the alveolar bone loss was the largest. As the number of teeth increased, the horizontal position displacement to the vertical position displacement of the center of resistance according to the alveolar bone loss showed a tendency to decrease. 2) As the alveolar bone loss increased, the horizontal position displacement to the vertical position displacement of the center of resistance regardless of the number of teeth was increased.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.339-350
• /
• 2003

The purpose of this study was to investigate the micro-implant height and anterior hook height to prevent maxillary six anterior teeth from lingual tipping and extruding during space closure. We manufactured maxillary dental arch form, bracket and wire, using the computer aided three-dimensional finite element method. Bracket was $.022'{\times}.028'$ slot size and attached to tooth surface. Wire was $.019'{\times}.025'$ stainless steel and $.032'{\times}.032'$ stainless steel hook was attached to wire between lateral incisor and canine. Length of hook was 8mm and force application points were marked at intervals of In. Four micro-implants were implanted on alveolar bone between second premolar and first molar. The heights of them were 4, 6, 8, 10mm starting from wire. We analyzed initial displacement of teeth by various force application point applying force of 150gm to each micro-implant and anterior hook. The conclusions of 4his study are as the following : 1. When the micro-implant height was 4m and the anterior hook height was 5mm and below, anterior teeth were tipped lingually. When the anterior hook height was 6mm and above, anterior teeth were tipped labially. 2. When the micro-implant height was 6mm and the anterior hook height was 6mm and below, the anterior teeth were tipped lingually. When the anterior hook height was 6m and above, the anterior teeth were tipped labially. But lingual tipping of anterior teeth decreased and labial tipping Increased when the micro-implant height was 6mm, compared with 4mm micro-implant height. 3. When the micro-implant height was 8mm and the anterior hook height was 2mm, the anterior teeth were tipped lingually. When the anterior hook height was 3mm and above, labial tipping movement of the anterior teeth increased proportionally. 4. When the micro-implant height was 10mm and the anterior hook height was 2mm and above, labial tipping of the anterior teeth increased proportionally. 5. As the anterior hook height increased, aterior teeth were tipped more labially. But extrusion occurred on canine and premolar area because of the increase of wire distortion. 6. Movement of the posterior teeth was tipped distally during maxillary six anterior teeth retraction using micro-im plant because of the friction between bracket and were Based on the results of this study, we could predict the pattern of the tooth movement according to position of micro-implant and height of anterior hook. It seems that we can find the force application point for proper tooth movement in consideration of inclination of anterior anterior teeth, periodontal condition, overjet and overbite

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.98-113
• /
• 2007

Objective: The purpose of this study was to evaluate the displacement pattern and the stress distribution shown on a finite element model 3-D visualization of a dry human skull using CT during the retraction of upper anterior teeth. Methods: Experimental groups were differentiated into 8 groups according to corticotomy, anchorage (buccal: mini implant between the maxillary second premolar and first molar and second premolar reinforced with a mini Implant, palatal: mini implant between the maxillary first molar and second molar and mini implant on the midpalatal suture) and force application point (use of a power arm or not). Results: In cases where anterior teeth were retracted by a conventional T-loop arch wire, the anterior teeth tipped more postero-inferiorly and the posterior teeth moved slightly in a mesial direction. In cases where anterior teeth were retracted with corticotomy, the stress at the anterior bone segment was distributed widely and showed a smaller degree of tipping movement of the anterior teeth, but with a greater amount of displacement. In cases where anterior teeth were retracted from the buccal side with force applied to the mini implant placed between the maxillary second premolar and the first molar to the canine power arm, it showed that a smaller degree of tipping movement was generated than when force was applied to the second premolar reinforced with a mini implant from the canine bracket. In cases where anterior teeth were retracted from the palatal side with force applied to the mini implant on the midpalatal suture, it resulted in a greater degree of tipping movement than when force was applied to the mini implant between the maxillary first and second molars. Conclusion: The results of this study verifies the effects of corticotomies and the effects of controlling orthodontic force vectors during tooth movement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.118-126
• /
• 2019

Purpose: This research is to investigate factors that affect dental aesthetics and analyze whether individual perception affects and difference of genders affects the esthetic factors. Materials and methods: Seventy dental students of Chonnam University aged from 25 to 35 years old without periodontal problems were included. Maxillary dental cast for participants were made, and standardized photo was taken with a digital camera. Maximum visual width and the position of gingival zenith of maxillary anterior teeth and maximum height of the maxillary central incisors were measured by a measurement program and the shape of central incisor was categorized. Questionnaire was conducted to evaluate esthetic perception. SPSS program was used to perform statistical analysis. Results: The average visual width ratio of right maxillary anteriors was 1.38:1:0.78 and 1.41:1:0.81 for the left which differ from the golden ratio. The width to height ratio for right and left central incisor was 0.84 and 0.83 respectively. The gingival zenith position was determined to be: mostly, central incisors and canines were located in the distal side, lateral incisors were located in the center. The visual width ratio of right maxillary anterior teeth, ratio of width to height of central incisor, gingival zenith position, crown morphology and amounts of gingival exposure upon smiling were not significantly different between genders, and facial patterns and these dental esthetic factors were not related to aesthetic perception. Conclusion: Even though participants had the visual width ratio of maxillary anteriors or ideal width to ideal height of central incisors that did not agree with the golden ratio, they had high satisfaction for dental esthetics. Esthetic perception depends more on subjective judgements of participants than objective indices.

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.635-645
• /
• 1999

The present study examines the effects of orthodontic treatment of surgically exposed impacted upper canines or ectopically erupted upper canines to periodontal condition and whether various opening procedures have significant difference in postoperative periodontal status. The subjects included 23 orthodontic patients(7 men, 16 women) with unilateral upper canine impaction treated either with closed eruption technique(group I), with apically positioned flap procedure (group II), and those with canines ectopically erupted through keratinized gingiva (group III). In each subject, the ectopic canine was orthodontically aligned, and changes in periodontal tissue were assessed by measuring keratinized gingival width, attached gingival width, probing depth and bone probing depth. In all three groups, the width of keratinized gingiva was preserved while showed no signs of detrimental periodontal condition such as gingival recession. In all three groups, no significant difference in periodontal pocket depth from control was observed. The width of attached gingiva was significantly greater in patients treated with apically positioned flap procedure(group II) than in patients on other groups.

• Imaging Science in Dentistry
• /
• v.30 no.3
• /
• pp.223-227
• /
• 2000

A 35-year-old man was referred to the department of Oral and maxillofacial surgery of Chonnam university hospital for the chief complaint of asymptomatic swelling on the buccal vestibule of upper right canine area. Radiographs revealed that the upper right canine was impacted and there was a well-circumscribed pericoronal radiolucency related with the canine. Multiple radiopaque foci were scattered in the radiolucent lesion, and the roots of the lateral incisor and the first premolar related to the lesion showed external resorption. The radiographic features of this lesion were typical of adenomatoid odontogenic tumor, but considering the gender and age of the patient, the tentative diagnosis was made as calcifying odontogenic cyst. Microscopically this lesion was diagnosed as calcifying odontogenic cyst. Because calcifying odontogenic cyst has no pathognomonic feature of radiographs, to consider radiographic features with clinical findings is necessary in order to establish more correct diagnosis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.4
• /
• pp.454-462
• /
• 2020

Proper treatment of an impacted tooth is required as it causes functional and esthetic disharmony, as well as it can cause root absorption of adjacent teeth. Treatment options for impacted teeth include periodic observation, surgical exposure, orthodontic traction followed by surgical exposure, tooth transplantation, and extraction. Modified Nance appliance, used for orthodontic traction, is clinically useful because it does not require patient cooperation. Through orthodontic traction combined with surgical exposure of impacted maxillary incisors, canines, and molars using modified Nance appliance, adequate results can be obtained.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.159-168
• /
• 1992

To predict eruptive path of maxillary canine, 13 male and 11 female malocclusions were longitudinally studied for 4 years. And to study frequency and distribution of impaction of maxillary canine, 1500 malocclusions were studied. The path, velocity and duration of maxillary canine eruption were determined by periodic angular and linear measurement using periodic orthopantomograms and cephalograms. The following results were obtained. 1. Maxillary canine was erupted with $14.5^{\circ}$ distal tipping from initial stage $98.1^{\circ}$ to final stage $83.6^{\circ}$ of axial inclination on orthopantomogram. 2. Eruptive velocity of maxillary canine was fastest on stage 4, and mean eruptive velocity was 10.5mm per year on stage 4. 3. Eruption of maxillary canine was completed 12 year 5 months in male and 11 years 8 months in female. 4. To predict the duration for eruption completion by position of maxillary canine on cephalogram, regression equation was obtained. 5. Frequency of impaction of maxillary canine was 1.47% in malocclusion and more frequent in male. Distribution of buccal and palatal, right and left impaction was no different, but unilateral impaction was more frequent.