• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.453-458
• /
• 2009

SiOC film was deposited by the chemical vapor deposition using BTMSM and oxygen mixed precursor. The characteristic of SiOC film varied with increasing of the gas flow rate ratios. The dielectric constant was obtained by C-V measurement using the structure of metal/SiOC film/Si. The space effect due to the steric hindrance between alkyl group at terminal bond of Si-$CH_3$ made the pores, and increased the thickness. However, the SiOC film due to the lowering of the polarization decreased the thickness and then decreased the dielectric constant. After annealing process, the dielectric constant decreased because of the evaporation of the OH or $H_2O$ sites. The thickness was related to the lowering of the dielectric constant by the reduction of the polarization and the thickness decreased with the decrease of the dielectric constant. The refractive index was in inverse proportion to thickness. The trends of the thickness and refractive index did not change after annealing.

• Journal of the Korea Concrete Institute
• /
• v.21 no.6
• /
• pp.773-780
• /
• 2009

Experiments on steel-concrete interface are performed to investigate and determine the mechanical roles and properties of interface parameters. The intrinsic different nature of bonded and unbonded interfaces are addressed based on the experimental observations that were obtained from two types of tests considering bonded and unbonded interfaces. The unbonded tests are performed for the specimens that are in unbonded when the initially bonded specimens are tested first. Four cases of lateral confinements including pure slip, and low and medium levels of lateral pressure are taken into account to investigate the effects of lateral confinements on interface behavior. It is shown that the maximum shear strengths, the levels of residual strengths and the Mode II fracture energy release rates are linearly related to the confinement levels. Based on the experimental evidences obtained from this study, the values of interface parameters required in a steel-concrete interface constitutive model will be presented in the companion paper.

• Journal of the Korean Magnetics Society
• /
• v.9 no.3
• /
• pp.127-130
• /
• 1999

The magnetism and electronic structure of Ru monolayer with square lattice is investigated using the FLAPW band method. The dependence of total energies on the lattice constant was calculated for three magnetic states, i.e.,para-,ferro-, and antiferromagnetic ones. It was found that there is no energy difference between para-and antiferromagnetic states for all the lattice constant. The possibility of antiferromagnetism in square Ru monolayer is thus excluded. The ferromagnetic state is most stable for the lattice constants greater than 7.30 a.u. The energy minimum is found at the lattice constant of 6.53 a.u. Where it is paramagenetic. It is calculated that the magenetic moment is 2.49 ${\MU}_B$ at 7.72 a.u., which is close to the lattice constant of Ag. The magnetic moment is almost saturated to be ${\MU}_B$ at the lattice constant of 7.86 a.u.

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.4
• /
• pp.25-30
• /
• 2014

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.3
• /
• pp.260-267
• /
• 2005

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.199-205
• /
• 2012

The purpose of this article is to study on the public administration in the perspective of I Ching(周易) which is the original philosophy and science of East Asia. I Ching is divided into two different schools, namely, the school of Image- Number I(象數易) and the school of Right Theory I(義理易). The school of Image- Number I are five science and technology(名 卜 醫 相 山) and astronomy, and so forth. And the school of Right Theory I are a Confucanist, a Taoist, a Mukist and all other thoughts. The meaning of Eastern Public Administration in mordern society is newer and better advanced concept, theory, and thoughts than western science and technology.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.368-373
• /
• 1998

As device dimensions approach submicrometer size in ULSI, the demand for interlayer dielectric materials with very low dielectric constant is increased to solve problems of RC delay caused by increase in parasitic resistance and capacitance in multilevel interconnectins. Fluorinated amorphous carbon in one of the promising materials in ULSI for the interlayer dielectric films with low dielectric constant. However, poor thermal stability and adhesion with Si substrates have inhibited its use. Recently, amorphous hydrogenated carbon (a-C:H) film as a buffer layer between the Si substrate and a-C:F has been introduced because it improves the adhesion with Si substrate. In this study, therfore, a-C:F/a-C:H films were deposited on p-type Si(100) by ECRCVD from $C_2F_6, CH_4$and $H_2$gas source and investigated the effect of forward power and composition on the thickness, chemical bonding state, dielectric constant, surface morphology and roughness of a-C:F films as an interlayer dielectric for ULSI. SEM, FT-IR, XPS, C-V meter and AFM were used for determination of each properties. The dielectric constant in the a-C:F/a-C:H films were found to decrease with increasing fluorine content. However, the dielectric constant increased after furnace annealing in $N_2$atomosphere at $400^{\circ}C$ for 1hour due to decreasing of flurorine content. However, the dielectric constant increased after furnace annealing in $N_2$atmosphere at $400^{\circ}C$ for 1hour due to decreasing of fluorine concentration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.111-120
• /
• 2000

Water, waste, electric and gas facilities are urban based facilities that needed in our life and are often located in underground. Therefore, underground facilities are more difficult to manage efficiently than ground facilities. It is needed to carry out survey/probe into underground facilities and to build database in order to prevent city-misfortunes being occurred because of negligent management and in order to minimize budget-waste and a traffic jam according to repetition of road excavation constructions. Also, the development of application system is required to manage efficiently underground facility. Chonju city has launched underground water supply facility computerizing project as a part of National Geographic Information System project until December 1998 and executed survey/probe into 402.89 km water supply that is 80 mm up inside central town area 39.6 $km^2$. Also, chonju city built database into 537 km water supply that is 80 mm below based on water supply card without other survey/probe works. Also, existing work process each department is changed into GIS applied work process and underground water supply facility management system is developed by its work process basis. Water supply underground facility management system that is developed is composed of sub-system like base-map management, water supply inspect, water supply management and water supply inquiry, construction work management, administration management and map management. This research presents the procedure and method of underground water supply facility survey/probe and problem being occurred during survey/probe procedure and also show the functions of each sub-systems composing underground water supply facility management system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.827-833
• /
• 2019

There are several factors to consider for a ship to enter or depart a port safely. It is particularly important to identify the tides in the port to reduce the risk of stranding the ship. Most previous studies have focused on finding and analyzing harmonic constants. However, the research on the analysis and accuracy of harmonic constants in other hydrographic agencies is lacking. In this study, six Korean ports (Incheon, Gunsan, Yeosu, Busan, Ulsan, and Sokcho) were compared to the British and Korean tide tables based on actual information. To find the cause of tidal difference, the tide height, tide time, and form factor were calculated using harmonic constants. The information was then compared with British and Korean data. As a result of the difference in analysis of actual information and tide tables, there was a difference between the actual tide height and time at each port. The cause was found to be the difference in the harmonic constant, tide, and form factor between the UK and Korea. Therefore, this study, the Korean standard port should be added to the British tide table, and harmonic constants, which are the criteria for creating tides, must be constantly updated with the latest information. Additionally, the tide tables produced in each country are more accurate than the tide tables produced in UK.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.435-440
• /
• 2016

The aim of study was to provide the preliminary data to find out characteristics of the difference between both refractive errors through analysis of ocular components variation. We measured spherical equivalent power and corneal radius with KR-8800, and axial length and anterior chamber depth with IOL Master, and the difference of measuring values between the right eye and left eye was applied as the absolute values in 100 adults aged 20~59 years. In all participants, the most common results showed that spherical equivalent power was $-1.83{\pm}2.17D$, axial length was 23.00~24.99mm, corneal radius was 7.50~7.89mm, and anterior chamber depth was 3.60~4.09mm. There are significant correlations between both eyes in axial length and anterior chamber depth with the difference of both spherical equivalent power. The difference of both axial lengths was the biggest with the difference of both refractive errors, and shown the highest correlation. The convergence complex study through classification by aspects is needed since the difference of both refractive errors is closely related with ocular components variation, and poor visual function would be caused by the difference of both refractive errors.