• Korea journal of population studies
• /
• v.32 no.2
• /
• pp.115-140
• /
• 2009

이 연구는 외국인 노동자들의 한국문화에 대한 적응문제를 살펴 보기 위하여 그들이 한국인들에 대하여 가지고 있는 사회적 거리감(social distance)을 분석하고 있다. 사회적 거리감은 인종 간 상호 관계 연구에서 중요한 개념으로 다루어져 왔으며, 특히 사회적응 수준을 드러내는 효과적인 척도로 각광받아왔다. 이 연구는 한국내 외국인 노동자들의 한국인에 대한 사회적 거리감의 결정요인을 규명하려는 목적을 가지고 있다. 서울과 경기 지역에서 수집된 자료에 대한 다중회귀분석(OLS Regression)을 통하여, 이 연구는 서구 사회에서 다수 인종의 사회적 거리감을 효과적으로 설명하는 것으로 판명된 요인들이 한국의 소수 인종인 외국인노동자들에게도적용될수있는가를살펴본다. 구체적으로는 연령, 성, 교육, 종교, 인종과 같은 사회인구학적 변수들과 한국인과의 접촉정도 가사회적 거리감에 유의미한 효과가 있는지 분석된다. 둘째, 이 연구는 외국인 노동자들의 가장 중요한 삶의 공간인 작업장에서의 경험과 관련된 변수들이 사회적 거리감에 대하여 가지는 효과를 탐구한다. 셋째, 구조방정식 모형(Structural Equation Model)의 적용을 통하여, 이 연구는 다중회귀에서 분석된 여러 설명 변수들 간의 복잡한 인과구조를 규명하고, 이들이 사회적 거리감에 미치는 영향을 직접효과, 간접효과, 전체효과로 나누어 살펴본다. 다중회귀분석 결과는 집단 간 사회적 거리감은 사회인구학적 변수들, 한국인들과의 접촉, 작업장 내 경험등 다양한 요인들의 복합적인 결과물이라는 점을 확인해 준다. 특히 분석결과는 작업장에서의 경험과 느낌이 한국 내 외국인 노동자들의 한국인들에 대한사회적거리감형성에결정적이라는사실을보여주는반면, 기존연구에서 효과적인 것으로 판명된 전통적 요인들은 영향력이 미미하다는 점을 말해준다. 한편, 구조방정식 모형을 적용한 분석결과는 한국인 친구들과의 접촉과 이해하기 쉽고 구체적인 노동조건이 사회적 거리감에 직접적으로 영향을 주고 있다는 것을 보여 준다. 한편 추상적인 노동조건은 사회적 거리감에 간접적으로 영향을 미친다. 상사에 대한 평가와 직무만족은 노동조건에 의해 유의미한 영향을 받지만, 한국인 친구와의 접촉과는 관련이 없다. 간단히 말해, 상사에 대한 평가와 직무만족은 노동조건이 사회적거리감에 대하여 가지는 효과를 매개한다. 결론적으로, 구조방정식모형의 분석결과는 작업장 관련 변수들간에 복잡한 인과구조가 존재한다는 점과 작업장 내 경험이 한국인에 대한 사회적 거리감 형성에 가장 중요하다는점을 확인해 준다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1031-1035
• /
• 2005

조력발전 건설사업에서 우선적으로 고려되어야 할 사항은 조수간만에 의해 외해부와 조지부 사이를 이동하는 해수를 적절히 소통시키는 것이다. 즉, 조력발전소에서 수문구조물의 목적은 주어진 조건 하에서 계획된 유량을 충분히 그리고 안전하게 배제시키는 것이다. 본 연구에서는 수문구조물에 대한 Apron의 길이와 경사의 변화에 의한 외해 조위와 시화호 수위차 조건에 따른 유량계수를 구해 배수능력과 유$\cdot$출입부, 외해, 시화호 및 큰가리섬 주위의 흐름 특성을 검토하고자 하였다. 이를 위해 시화호를 실험대상으로 하여 구조물을 중심으로 외해측으로 1,000m, 시화호측으로 500m, 폭 1,500m의 범위를 선정하였다. 수리모형을 1대50의 축척비로 제작하였다. 표 1은 실험별 Apron과 수문구조물의 제원을 나타내며, 수문구조물은 7기로 이루어졌다. 시화호의 흐름은 관성력과 중력이 지배력이 되며, 이때 상사법칙은 Froude 상사법칙을 적용할 수 있다. 실험III은 실험II에서 Apron의 경사를 1대10에서 1대5로 수정한 실험으로 수위조건은 외해측 -2.530 EL.m이고, 시화호측은 -1.603EL.m이다. 유량계수를 산정하기 위하여 6개 실험조건을 기본계획에서 제시된 수위-조위 조건에서 수위차 및 통수유량을 분배하여 결정하였고 유량계수 산정식에 따라 구조물의 유입부와 유출부에서 유속-면적법에 의해서 유량을 측정하였다. 그리고 국부평면 실험모형에서의 전체적인 해류의 흐름을 분석하기 위해 2차원 유속을 측정하였다. 또한, 유$\cdot$출입부 안정성을 검토하기 위해 Apron 지점과 수문구조물 지점에 3점법으로 유속을 측정하였으며, 색소를 이용하여 유황을 관찰하였다. 시화호와 외해의 수위차가 1.011 m일 때의 전체 수문구조물을 통과하는 유량을 비교한 결과, 실험II 및 실험III의 통과유량은 각각 $10,924m^3/s$ 및 $10,075m^3/s$로서 실험 I의 $2,757m^3/s$에 비해 통수능이 많이 개선되었음을 알 수 있다.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.78-87
• /
• 2015

Focusing effect of a metallic layer in a severe accident depending on the aspect ratios and cooling conditions of top plate and side wall was investigated. Experiments were carried out for Rayleigh numbers and aspect ratio in the range of $8.49{\times}10^7{\sim}5.43{\times}10^9$, 0.135~0.541 respectively. In order to achieve high Rayleigh numbers, the heat transfer experiments were replaced by mass transfer experiments based on the heat and mass transfer analogy. A sulfuric acid-copper sulfate ($H_2SO4-CuSO_4$) electroplating system was adopted as the mass transfer system. The experimental results agreed well with the Rayleigh-Benard natural convection correlations of Dropkin and Somerscales and Globe and Dropkin. When compared with the standard Rayleigh-Benard problem, the cooling by the side wall is even higher than the top. For a shorter height, the interaction between the heated and cooled plumes increases due to decrease of the height. Thus, the heat transfer increases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.211-220
• /
• 2012

Coarse granular materials such as gravel, rubble is used as major fill materials in earth structures of railway, road and dam. Therefore, it is essential to accurately evaluate properties of these materials for reasonable design and construction. In the precedent study, we built large triaxial testing system and verified system compliance with a focus on the dynamic properties. And we could secured the reliability of the system. In this study, the cyclic triaxial tests were performed in various experimental conditions on coarse granular material. Two series of parallel graded samples are prepared by mixing crushed rock. The influence of grain size, loading pattern, loading frequency, and fine contents were analyzed and discussed.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.7
• /
• pp.57-65
• /
• 2011

Numerical simulations by three-dimensional Particle Flow Code($PFC^{3D}$, Itasca) considering distinct element method (DEM) were carried out for prediction of triaxial compression test with sand material. The effect of scale conditions for numerical model and distinct material on final prediction results was analyzed by numerical models under various scale conditions, and following observations were made from the numerical experiments. It is very useful to model the initial material condition without any porosity conversion from 2-D to 3-D DEM. Numerical experiments have shown that in all cases considered, 3D distinct element modeling could provide good agreement on stress-strain behavior, volume change and strength properties with laboratory testing results. It was important thing to assess reasonable scale ratio of numerical model and distinct elements for saving calculation time and securing calculation efficiency under condition with accuracy and appropriateness as numerical laboratory. As results of DEM simulations under various scale conditions, most of results show that shear strength properties as cohesion and internal friction angle are similar in condition of $D_{mod}/D_{gmax}$ < 10. It shows that 3-D distinct element method could be used as efficient tool to assess strength properties by numerical laboratory technique.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.2
• /
• pp.11-15
• /
• 2011

Heat transfer equation is first reviewed and then governing equation of moisture diffusion. Analogy scheme is applied to analysis the moisture absorption problem of polymers. It make possible to numerically analyze the diffusion problem for single medium by using commercial finite element code if it is under the isothermal loading condition. It is extended to special multimaterial system by introducing pressure ratio function, whose moisture characteristics of materials are proportional to temperature only. The weight changes of silicon-nonconductive-polymer joint model due to moisture absorption is measured and been very close to the numerical results as for single media with boundary condition with zero concentration, but yields numerical errors as for multisystem media.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.528-533
• /
• 1988

The assignment of boundary conditions for the piston thermal loading analysis in internal combustion engine has been tested using the thermal circuit method with an engine simulation program. In an attempt to examine the accuracy of the employed boundary condition, another thermal boundary condition has been sought for through the electrolytic tank analogue method. Comparison of calculated temperature distributions obtained from these two boundary conditions with measured temperature values reveals that the electrolytic tank analogue method gives excellent agreement. However, the thermal circuit method has been found to be reasonable for practical applications, if modified partially.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.39-45
• /
• 2005

The aim of this research is to predict the thickness and loading noise of the round-tip shaped Hartzell propeller currently used in the general aviation aircraft. Before implementing the noise analysis, the pressure distribution on the propeller was obtained by using the free wake panel method and unsteady Bernoulli's equation. The noise signal at observer position can be obtained by using the FW-H equation. The noise prediction results for the propeller indicates that the thickness noise has s symmetric directivity pattern with respect to the tip path plane, while the noise due to loading shows higher noise directivity toward downstream than the upstream direction from the rotor plane. The loading noise is dominant rather than the thickness noise in normal operating condition.

• Journal of Korea Water Resources Association
• /
• v.31 no.5
• /
• pp.575-586
• /
• 1998

A relaxed similarity theory which can be applied to river models with movable beds is established by modifying existing theory by Einstein and chien(1954). Experimental data collected from river models with movable beds were used to evaluate the applicability of the proposed theory. Effects of similarity of flow, ΔFΔM, and similarity of sediment movement, ΔFs, were examined by analyzing the behaviour of total river-bed change. The results show that the smaller ΔFΔM or ΔFs is, respectively, the larger total sedimentation is. The modified similarity theory established in this study would be useful and practical whenever it is impossible or very difficult to satisfy strict theoretical requirements concerning the river model experiments with movable beds. Keywords : river model, similarity of flow, similarity of sediment movement, sediment transport, river-bed change.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.11
• /
• pp.883-891
• /
• 2018

In this paper, aerodynamic noise simulation was conducted using DES (Detached Eddy Simulation) and FW-H (Ffowcs Williams and Hawkings) acoustic analogy for the tandem cylinders which have configuration similar to a landing gear of airplanes. Numerical simulation for the tandem cylinders whose centers are 3.7D apart was carried out and results were compared with the measured data such as flow characteristics, pressure coefficients on the cylinder surfaces and far-field noise characteristics. It was confirmed that periodically shedded vortices released at the upstream cylinder and impinged on the downstream cylinder surface are major sources of aerodynamic noise. After verifying the computational method of using DES and FW-H acoustic analogy for predicting aerodynamic noise of tandem cylinders, additional simulation was conducted to examine the effect of attaching a splitter plate at the rear of the upstream cylinder. It was confirmed that the noise level in specific frequency band decreased significantly because the splitter plate changed the vortex shedding features and reduced dipole noise source.