• The Journal of the Petrological Society of Korea
• /
• v.2 no.2
• /
• pp.74-94
• /
• 1993

Metabasites and metapelites in the Mungyong area were intruded by Cretaceous granites with radius of 4-8 km. As the distance from granite body increases, the mineral assemblage of metabasite changes from amphibole + plagioclase through amphibole + plagioclase + epidote to amphibole + plagioclase + epidote + chlorite. The compositional variations of amphibole and plagioclase according to the change of metamorphic grade and bulk rock compositions are very complex. Towards the Mungyong Cretaceous granite body, the mineral assemblage of metapelite changes from chlorite+ muscovite(ch1orite zone) through biotite + chlorite + muscovite(biotite zone) to andalusite+biotite + muscovite${\pm}$chlorite or cordierite+ biotite+ muscovite${\pm}$chlorite(cordierite zone). The estimated metamorphic conditions of cordierite zone are 480~$580^{\circ}C$ 1.5-3.3 kb. The theoretical study on the thermal metamorphism caused by the Cretaceous granite with radius longer than 4 km in the Mungyong area suggests the followings: The degree of metamorphism is mainly determined not by the size of granite body but by the temperature of granite intrusion; The country rocks within 2 km from Cretaceous granite have undergone metamorphism with temperature higher than $500^{\circ}C$, which is consistent with the petrological study in the Mungyong area. Mungyong Cretaceous granite caused a low P/T thermal metamorphism to the country rocks; the amphibolite facies metamorphism to the country rocks within 1-2 km from the granite body and the epidote-amphibolite and greenschist facies metamorphism to the country rocks within 2-5 km.

• Journal of Yeungnam Medical Science
• /
• v.11 no.1
• /
• pp.72-81
• /
• 1994

Total 55 patients with nonsmall cell lung cancer treated with radiation therapy at Department of Therapeutic Radiology, Yeungnam University Hospital, between May-1 1986 and April-30 1993 were retrospectively analyzed by clinical characteristics, failure patterns, follow up duration and survival ratio according to prognostic factors. Obtained results were as follows : 1. Male to female ratio was 17.3 2. Sixth and seventh decades were predominant age group. 3. The patients were 8 in stage I-II, 34 in stage IIIA, 13 in stage IIIb, respectively. 4. Forty five patients out of 55 were squamous cell carcinoma. 5. Primary tumor were originated from upper lobe bronchi predominantly. 6. The size of the primary tumor, lymph node involvement and the degree of differentiation were important in evaluation of prognosis. 7. In conclusion, for patients with poor prognostic factors systemic chemotherapy and multidisciplinary approach were recommended for better treatment outcome and improvement of survival.

• Journal of Korean Society of Forest Science
• /
• v.58 no.1
• /
• pp.8-16
• /
• 1982

To study the comparison of aboveground biomass of paulownia coreana Uyeki of 6-year-old, located in Seongju of non-attacked forest and Ulsan of damaged forest by the air pollution were selected. Ten sample trees in Seongju district and seven trees in Ulsan selected taking account of DBH were measured for 16 trees in total within a $10{\times}10m$ experimental plot. The diagram of oven-dry weight distribution of stem, branch and needle for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the two-variables, DBH and tree height, combined term were presented. IF the estimations are extended to a hectare area stand, it contains 47.49 tons of aboveground biomass in Seongju district and 19.05 tons of it in Ulsan. The annual net productions were 11.64 tons of above 2.29 kg/kg/yr in Ulsan and the efficiency of leaf to produce stem was 2.99kg/kg/yr in Seongju and 0.83kg/kg/yr in Ulsan.

• Korean Journal of Environmental Agriculture
• /
• v.2 no.1
• /
• pp.45-54
• /
• 1983

This experiment was carried out to investigate effects of dense planting on the growth and productivity in varieties of hot pepper at open field. Three varieties (Joseng jinheung, Weonkyo No. 304 and Bulam house Putgochu) were sowed on Jan. 30th and transplanted on May 12th. The planting densities used were 3,300, 5,500 and 8,300 plants per 10a. The results obtained are as follows: 1) With higher plant density, the plant shape was changed from open-type to upright-type and the yield was increased, presumably due to the increase of leaf area index. 2) LAI and SLA per unit area were increased by denser planting. Wonkyo No. 304 presented the highest LAI and the lowest SLA. 3) Dry matter weight per unit area was also increased, however the LW/SW ratio was tended to decrease on denser planting. 4) Through crop growth analysis, it was determined that CGR and NAR were increased during the early growth stages and became decreased from last June. 5) Light intensity under the canopy formed by denser planting was decreased by 40% measured at 60 ㎝ above the soil surface. The vertical distribution of fruits became concentrated the upper part of plant. Fruit yield per unit area in denser planting was increased as compared to the conventional planting. The number of fruit setting decreased. 6) Generally, no differences in yield were detected in comparison between denser planting and conventional planting harvested on Aug. 30th and Oct. 15th, respectively. But Weonkyo No. 304 increased yield by 18% in denser planting.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.1
• /
• pp.70-77
• /
• 2016

The object of this study was to evaluate the effects of climatic elements on potato yield and create a model for estimating the potato yield. We used 35 yield data of Sumi variety produced in mulching cultivation from 17 regions over 11 years. According to the results, some climatic elements showed significant level of correlation coefficient with marketable yield of potato. Totally 22 items of climatic elements appeared to be significant. Especially precipitation for 20 days after planting (Prec_1 & 2), relative humidity during 11~20 days after planting (RH_2), precipitation for 20 days before harvest (Prec_9 & 10), sunshine hours during 50~41 days before harvest (SH_6) and 20 days before harvest (SH_9 & 10), and days of rain during 10 days before harvest (DR_10) were highly significant in quadratic regression analysis. 22 items of predicted yield ($Y_i=aX_i{^2}+bX_i+c$) were induced from the 22 items of climatic elements (step 1). The correlations between the predicted yields and marketable yield were stepwised using SPSS, statistical program, and we selected a model (step 2), in which 4 items of independent variables ($Y_i$) were used. Subsequently the $Y_i$ were replaced with the equation in step 1, $aX_i{^2}+bX_i+c$. Finally we derived the model to predict the marketable yield of potato as below. $$Y=-336{\times}DR_-10^2+854{\times}DR_-10-0.422{\times}Prec_-9^2+43.3{\times}Prec_-9\\-0.0414{\times}RH_-2^2+46.2{\times}RH_-2-0.0102{\times}Prec_-2^2-7.00{\times}Prec_-2-10039$$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.95-95
• /
• 2018

강재의 방식법 중 도장은 부식을 억제하는데 효과적이고 편리한 방법으로 선박 및 해양 강 구조물의 방식법으로 사용되고 있다. 한편, 강 구조물의 효율적인 유지관리를 위해서는 방식 도장의 도막 열화도를 평가하고 잔존 수명을 예측하여 최적 시기에 보수도장 혹은 재도장하는 것이 필요하다. 일반적으로 선박 및 해양구조물에 적용되는 도막의 방식 성능 평가 방법으로 해수 침지 시험, 염수 분무 시험, 옥외 폭로 시험 등이 있다. 그러나 이러한 시험들은 그 시험 방법에 따라서 정량적인 평가에 한계가 있음은 물론 장기간 소요되는 등 곤란한 문제점이 있다. 그러므로 선박 및 해양구조물을 비롯하여 교량, 각종 강 구조물의 도장 방식에 사용되는 방식용 도료의 성능을 단기간에 적절하게 평가할 수 있는 가속시험법이 제시되며 연구-사용되고 있다. 그 중 도막 방식 성능을 보다 효율적, 비파괴적, 정량적으로 평가할 수 있는 임피던스 분광법(EIS)과 같은 전기화학적 방법은 상대적으로 시험 기간을 크게 단축시킬 수 있고, 대상 방식 도장의 미세한 성능 차이도 분별 가능하다는 장점이 있다[1]. 따라서 본 연구에서는 선박 및 해양구조물 등 가혹한 부식환경에서 강력한 내구성을 가질 수 있도록 다양한 종류의 표면처리 도장 시편을 제작하여 자외선 조사-염수분무-침지환경 등의 열악한 환경조건 하에서 부식-열화 촉진 시험을 실시하였다. 그리고 그 촉진 열화 과정에서 도막의 외관 상태를 관찰 분석함은 물론 전기화학적 임피던스 분광법을 병행 측정하며 그 표면막의 부식 및 도막 열화도를 비교-종합 평가하였다.본 연구에 사용된 시편은 Al 및 Zn 도금 강판에 에폭시, 에폭시-실리콘 우레탄, 에폭시-우레탄 도장 시편으로 Scribe, No Scribe 및 비교재 Al 및 Zn 도금 시편으로 분류하여 각각 실험을 진행하였다. 즉, 도막 열화 시험은 복합 노화 시험법으로 UV 조사 36 시간(ASTM G53), 염수분무 32 시간(ISO 7253), 수분 응축 10 시간을 1 Cycle로 100 Cycle(7800 시간) 동안 실험을 진행하였다. 이때 도막 열화도 평가는 전기화학적 임피던스 분광법을 이용하여 각 실험 조건별로 주파수에 따른 임피던스(Z) 값을 평가하였다. 즉, 상온 $25^{\circ}C$의 3.5% NaCl 100 ml 수용액에 작동 전극(Working Electrode)과 구리 도선을 통해 연결하였고, 노출 면적은 $1cm^2$로 일정하게 유지 하였으며, 상대 전극(Counter Electrode)은 탄소봉, 기준 전극(Reference Electrode)으로 포화카로멜전극(Saturated Calomel Electrode)을 사용하여 측정하였다. No Scribe 시편의 경우에는 Al 기판 에폭시-실리콘 우레탄 도장 시편이 우수한 도막 저항성을 나타내었으며, 에폭시-우레탄 도장시편은 23사이클 이후의 저항값이 가장 낮게 나타났다. Zn 기판의 경우는 에폭시, 에폭시-실리콘 우레탄, 에폭시-우레탄 도장 시편 모두 저항 값이 유사하였으며, Al 및 Zn 도금 시편은 도장 처리된 시편에 비해 훨씬 낮은 저항 값을 보였다. 또한 Scribe 시편의 경우에는 Al 기판 에폭시-실리콘 우레탄 도장 시편에서 높은 초기 저항 값을 보였으며, 23 사이클 후의 저항 값은 세 종류의 도막에서 약 1~0.1 Gohm 으로 나타났다. 그리고 Zn 기판 에폭시-실리콘 우레탄 도장 시편에서 가장 낮은 도막 저항 값이 나타났다. 이상의 실험을 통해서 본 연구 내용은 실내촉진시험으로 선박 및 해양 강 구조물에 사용되는 다양한 종류의 도막의 열화도를 평가하는 기초 설계 지침으로 응용될 수 있을 것으로 사료된다. 한편, 도막은 노출 환경에 따라 방식 성능이 다르므로 실제 도막의 사용환경을 고려하여 도장 사양별 적용 부위에 따른 적정 가속 실험 방법을 선정할 필요가 있다고 사료된다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.262-269
• /
• 2002

The purpose of this study was to compare the effect of distance of light tip to resin surfaces and exposure time on the polymerization of surface and 2 mm subsurface of composite resins cured with two light sources; conventional halogen light (XL 3000, 3M, U.S.A.) and plasma arc light (Flipo, LOKKI, France) and compare the uniformity of polymerization from the center to the periphery of resin surfaces according to polymerization diameter cure with two light sources. From the experiment, the following results were obtained. 1. Difference of relative light intensity decrease in plasma arc light smaller than that of conventional halogen light(p<0.05). 2. In all groups, microhardness of top surfaces was decreased when distance of the light tip to resin surfaces is more than 2mm and increased according to increase of exposure time(p<0.05). 3. Difference of microhardness of the 2mm subsurface was rapidly decreased when distance of light tip to resin surfaces is more than 4mm(except, plasma arc light exposure time of 3 seconds). and the distance of light tip to resin surfaces and exposure time more affected 2mm subsurface rather than top surface(p<0.05). 4. Although exposure time was increased, difference of microhardness of the 2mm subsurface with the distance of light tip to resin surfaces was relatively high in groups between below 4mm and 6 mm(p<0.05). 5. Plasma arc light exposure time of 6 to 9 seconds produced microhardness values and microhardness change according to various distance similar to those produced with 40 to 80 second exposure to a conventional halogen light(p>0.05). 6. In all groups, microhardness was decreased gradually from the center to the periphery of resin surfaces(p<0.05).

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.202-209
• /
• 2014

RNA interference (RNAi) is the method which controls phenotypes of gene in live cells. Chitinase is the enzyme helping digestion and absorption of old cuticles during the ecdysis of insects. In order to investigate molting-inhibition effect with the chitinase related gene in Spodoptera litura, RNA was extracted from the $5^{th}$ instars. cDNA was synthesized and then we obtained about 700 bp size chitinase. After PCR products were cloned into a pGEM T-easy vector, colonies were picked. DNA was extracted from the colony cultures. EcoR I enzyme was used to check whether PCR products were inserted or not. And then we confirmed vector band of about 3 kb and insert band of about 700 bp. To synthesize the dsRNA, each DNA was cut with Spe I and Nco I enzymes (Circular DNA became lineared DNA). After synthesis of dsRNA, approximately 5 ul dsRNA was injected into the $3^{rd}$ abdominal segment of S. litura $4^{th}$ larvae. The concentration of dsRNA was about $10{\mu}g/{\mu}l$. We confirmed larval-larval molting : there were phenotypically abnormal individuals - for instance malformation, molting inhibition and change of integument color. Pupaadult molting : there were phenotypically abnormal individuals - for instance molting inhibition, change of wings and malformation. Also we could investigate the pupation, emergence and variation about noninjection, treated with DW and dsRNA. Each pupation was non-injection 83.3%, DW 78.3% and dsRNA 66.7%. Each emergence was non-injection 90.0%, DW 72.3% and dsRNA 65.0%. So we considered that chitinase dsRNA induced molting inhibition effect. But each variation was non-injection 8.9%, DW 2.9% and dsRNA 19.2%. Therefore dsRNA group showed the highest variation value. When 18 hours after injecting dsRNA, we could obtain abnormal individual.

• Korean Journal of Environment and Ecology
• /
• v.23 no.5
• /
• pp.447-459
• /
• 2009

This study is intended to provide basic date for the efficient management of Pinus densiflora community by analyzing ecological characteristics of Pinus densiflora inhabiting Byeonsanbando National Park. According to investigations, P. densiflora community and P. densiflora-Quercus community are widely distributed, occupying 40.3% of the total area. 21 sites ($400m^2$per site) are selected for TWINSPAN analysis, and the result indicates that the whole community of P. densiflora and P. densiflora-Quercus can be classified into 8 types, and the age of P. densiflora is 40-50 years, which is similar to that of deciduous broad-leaved trees. The 8 community types are: P. densiflora community which competes with Quercus variabilis; P. densiflora community in which Fraxinus sieboldiana and Quercus serrata grow in the understory layer; P. densifloa community in which Q. serrata grow in the understory layer and Smilax china var. microphylla in the shrub layer respectively; P. densifloa community in which P. densiflora and F. sieboldiana grow in the understory layer; P. densiflora community which competes with Q. serrata and Carpinus tschonoskii; P. densiflora community which competes with Q. variabilis and Q. serrata; P. densiflora community in which Prunus sargentii grow; P. densiflora community in which Abies holophylla grow. P. densiflora community which competes with Q. variablis and C. tschonoskii seems to be in a stage of succession to deciduous broad-leaved community. The analysis indicates that Shannon diversity index is 0.2756-1.3879. It also indicates that there is a negative correlation between P. densiflora and Q. variabilis and C. tschonoskii; there is a positive correlation between P. densiflora and F. sieboldiana and Rhododendron schlippenbachii. These investigations show that the transformation of vegetation is already under way. There is a possibility that ecological succession can take place in 30.4% of the total area from P. densiflora to Quercus and deciduous broad - leaved trees. Therefore, it is recommended that the preservation and maintenance of P. densiflora be implemented by taking control of competing species which undermine the stability of P. densiflora forest community.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.559-575
• /
• 2012

This study, targeting Namhan Mountain Fortress which was designated as a No. 57 national historic site and placed on the World Heritage Tentative List in 2010, was intended to identify the change of vegetation structures by reviewing past references, pictures, research data and additionally conducting a site survey. Also, it was designed to draw up measures for restoring vegetation suitable for historically and culturally valuable Namhan Mountain Fortress. According to the biotope mapping of study site, Quercus spp. forest distributed a greatest part of area with 40.8% of $2,611,823m^2$. Pinus densiflora forest, highly likely to go through ecological succession, was dispersed in the whole region of Cheongryangsan, the area from West Gate to North Gate and the ranges between South Gate to Cheongryangsan with taking 16.5%. Pinus densiflora forest with a low probability of succession amounted to 4.7% and was dispersed mainly in the forest behind Namhansan elementary school. Pinus densiflora going on the ecological succession is distributed a portion of 2.9%. And the currently dying out Pinus densiflora forest amounted to 2.1%. As a result of analysis of the vegetation structure for 19 years, the succession from Pinus densiflora forest to Pinus densiflora and succession from Quercus spp. mixed forest to Quercus spp. forest to Carpinus laxiflora forest were predicted. Additionally, Quercus spp. expanded its dominance over time. According to the characteristics of each classified zone, the site was categorized into $553,508m^2$ area of Pinus densiflora forest area for the landscape maintenance, $114,293m^2$ area of Pinus densiflora forest area for the landscape restoration, $205,306m^2$ area of Pinus densiflora forest area for the disclimax, and $1,169,973m^2$ area of Pinus densiflora forest area for inducing ecological succession.