• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.34-42
• /
• 2005

In orthogonal frequency-division multiple access (OFDMA) uplink environments, asynchronously received signals can cause multiple access interference (MAI). This paper focuses on the performance degradation due to the MAI over frequency-selective fading channels. We first introduce the timing misalignment, which is defined as the relative timing difference between asynchronous timing error of uplink user and reference time of the base station, and analytically derive the MAI using the power delay profile of wide-sense stationary uncorrelated scattering (WSSUS) channel model. Then, the effective signal-to-noise ratio (SNR) and the average symbol error probability (SEP) are derived. The proposed analytical results are verified through simulations with respect to the region of the timing misalignment and the number of asynchronous users.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.289-295
• /
• 2015

This paper describes a ground monocular vision-based measurement algorithm measuring relative range and position of aircraft using the information of wingspan and optical parameters for the camera. A technique obtaining an aircraft image is also described in this paper. This technique can be used as external measurement for autonomous landing instead of ILS. To verify the performance of these algorithms, flight experiment is performed using light sport aircraft with GPS and monocular camera. Finally we obtained the reasonable RMSE of 1.85m is obtained.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.513-522
• /
• 2020

This paper describes a relative navigation algorithm using PSD(Position Sensitive Detector) and heterogeneous sensor fusion. In order to perform relative navigation between a target and a chaser, a hardware system is constructed and simulations are conducted, using the relative navigation algorithm considering the hardware system. By analyzing errors through the simulations, advantages of using the heterogeneous sensor fusion are found. Finally, navigation performance is verified under an experimental environment established to obtain sensor data from the hardware system for data post-processing.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.10
• /
• pp.23-31
• /
• 2007

Although the relative density is an important factor showing mechanical properties of granular soils, the methods for its estimation have not been satisfactorily standardized. Many researchers have proposed various methods to determine max, and min, dry density, but the results, especially for max, dry density, show significant differences. In this study, a simple and practical method of evaluating the max, relative density was proposed, which could give reliable results in comparison with conventional methods. The experiment was carried out by varying the number of blows and the layers of the sample for each mold and the results were compared with those of Bowles method.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.1
• /
• pp.53-59
• /
• 2004

A variety of factors such as the pattern of intake (acute or chronic), monitoring interval and the characteristics of the radionuclides could have a significant influence on the estimates for the intake and internal dose. The relative differences of the assessed intakes based on the assumption of an acute intake to that of a chronic intake were evaluated by using the predicted bioassay quantity in the whole body or organs for an acute and chronic intake through the inhalation of $^{125}$ I, $^{137}$ C, $^{235}$ U with the AMAD of 1 ${\mu}{\textrm}{m}$ and 5 ${\mu}{\textrm}{m}$ for the monitoring intervals of 7, 14, 30, 60, 90, 120, 180, 360 days, respectively, The relative difference of the assessed intakes based on the intake pattern is affected by the monitoring interval, radionuclide and absorption type, but the particle size has little influence on the difference of the assessed intakes based on the intake pattern. The maximum monitoring interval, which is defined as the monitoring interval that the relative difference of the assessed intakes based on the assumption of an acute intake to that of a chronic intake is less than 10%, is 60 d for $^{125}$ I with Type F, 180 d for $^{137}$ C with Type F, 90 d for $^{235}$ U with Type M, and 360 d for $^{235}$ U with Type S. It was concluded that an intake pattern has little influence on the estimates of the assessed intake in the case where the monitoring interval is shorter than the maximum monitoring interval for each radionuclide.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.204-208
• /
• 1991

Five models for net radiation estimation reported by Linacre(1968), Berljand(1956), Nakayama et al. (1983), Chang (1970) and Doorenbos et al. (1977) were tested for the adaptability to Korea. A new model with effective longwave radiation term parameterized by air temperature, solar radiation and vapor pressure was formulated and tested for its accuracy. Above five models with original parameter values showed large absolute mean deviations ranging from 0.86 to 1.64 MJ/$m^2$/day. The parameters of the above five models were reestimated by using net radiation and meteorological elements measured in Suwon, Korea. These five models with new parameter values showed absolute mean deviations ranging from 0.74 to 0.88 MJ/$m^2$/day. The following model was newly formulated: Rn=(1- $\alpha$) Rs- $\sigma$ $T_{k}$$^{4}$ (0.0103 Exp (0 .0731 Rs) -0.0475 (equation omitted) +0 .2478) ($R^2$=0.997, n=63) where $\alpha$ =albedo, $\sigma$=Stefan-Boltzmann constant, Rs=solar radiation in MJ/$m^2$/day, Tk =air temperature in Kelvin and $e_{a}$=vapor pressure in mb. This model revealed 0.4988 MJ/$m^2$/day in absolute mean deviation when applied to an independent set of meteorological data.a.a.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2003

In this study, TOPMODEL(TOPography based hydrologic MODEL) was tested linked with Muskingum river routing technique for $581.7km^2$ Anseong-cheon watershed. Linear trend surface interpolation was used to give flow direction for flat areas located in downstream watershed. MDF (multiple flow direction) algorithm was adopted to derive the distribution of ln(a/$tan{\beta}$) values of the model. Because the coarser DEM resolution, the greater information loss, the watershed was divided into subwaterhseds to keep DEM resolution, and the simulation result of the upstream watershed was transferred to downstream watershed by Muskingum techniques. Relative error of the simulated result by 500 m DEM resolution showed 27.2 %. On the other hand, the relative error of the simulated result of 300 m DEM resolution by linked 2 subwatersheds with Muskingum method showed 15.8 %.

• Journal of IKEEE
• /
• v.6 no.2 s.11
• /
• pp.136-145
• /
• 2002

The simulator for the analysis of the lattice temperature under the steady-state condition is developed. The heat flow equation using the Slotboom variables is discretized and the integration method of the thermal conductivity without using the numerical analysis method is presented. The simulations are executed on the $N^+P$ junction diode and BJT to verify the proposed method. The average relative error of the lattice temperature of $N^+P$ diode compared with DAVINCI is 2% when 1.4[V] forward bias is applied and the average relative error of the lattice temperature of BJT compared with MEDICI is 3% when 5.0[V] is applied to the collector contact and 0.5[V] is applied to the base contact. BANDIS using the proposed method of integration of thermal conductivity needs 3.45 times of matrix solution to solve one bias step and DAVINCI needs 5.1 times of matrix solution MEDICI needs 4.3 times of matrix solution.

• Journal of the Korean Society of Tobacco Science
• /
• v.2 no.2
• /
• pp.38-43
• /
• 1980

The spectrophotometric determination oi reducing sugar in the tobacco leaves was carried out by employing blue tetrazolium chloride as a color developing reagent. The absorption maximum of formazan dye which is the product of the reaction between blue tetrazolium chloride and fructose was shown to be $530^{nm}$. In the fructose concentration range of 0.02mg/ml-0.14mg/ml the calibration curve was well coincided to the law of Beer-Lambert. In order to take a look at the accuracy and/or recovery rate of fructose determination, the standard fructose was added to the tobacco leaves and the concentration of this standard fructose was estimated. A tittle lower concentration of the standard fructose compared with the pure one in solution was observed. However, an excellent analytical recovery was revealed under the -2% of relative error limit. When we carried out the quantitative determination of this reducing sugar by the method of visual read-out (without using the spectrophotometer), the relative error was obtained to be $\pm$10%.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2060-2071
• /
• 1999

The complicate software failure system is defined to the superposition of the points of failure from several component point process. Because the likelihood function is difficulty in computing, we consider Gibbs sampler using iteration sampling based method. For each observed failure epoch, we applied to latent variables that indicates with component of the superposition mode. For model selection, we explored the posterior Bayesian criterion and the sum of relative errors for the comparison simple pattern with superposition model. A numerical example with NHPP simulated data set applies the thinning method proposed by Lewis and Shedler[25] is given, we consider Goel-Okumoto model and Weibull model with GOS, inference of parameter is studied. Using the posterior Bayesian criterion and the sum of relative errors, as we would expect, the superposition model is best on model under diffuse priors.