• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.195-201
• /
• 2016

In this paper, we present the direction finding accuracy of correlative interferometer method and amplitude-phase comparison method. Spiral antennas are used for amplitude-phase comparison method and blade antennas are used for correlative interferometer method. Those are made for uniform circular array (UCA) direction finding antenna systems. We simulate the accuracy of azimuth angle with 3 antennas UCA when SNR is 20 dB and baseline is 0.5 wave length. Correlative interferometer method has better accuracy than amplitude-phase comparison method.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2017

In this paper, we propose a new method for a correlative phase comparison direction finding(DF) which detects the arrival direction of radio waves by data fusing the calculated phase difference and the measured phase difference between the antennas when the radio waves are incident on the circular array antenna composed of 7 antennas respectively. The correlation type phase comparison method uses a uniform circular array(UCA) and a linear array method. The phase difference data calculated formally and the phase difference data measured in the test environment are fused with a correlation function, therefore, it is superior to the currently used phase comparison direction detection method. When the signal-to-noise ratio (SNR) of the received signal is 20dB and the inter-antenna distance to the wavelength of the received signal($L/{\lambda}$) is 0.5, the accuracy of the correlative DF is $1.7^{\circ}$ while measurement phase comparison's is larger than $2.5^{\circ}$, It can be used for electromagnetic signal monitoring and military direction detection.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.1-6
• /
• 2018

This paper describes the azimuth accuracy of correlative interferometer direction finder on a scaled down airplane model. When the antennas are placed on the bottom of an airplane, reflection signals caused by an aircraft structure are arise and caused an azimuth error. In this paper, the F-16 fighter scale-down model was made to 5:1, and five antennas were placed on the bottom of the model. The accuracy was made by numerically analyzing the phases of the radio waves received by the five antennas when the signal of emitter was transmitted on $0-360^{\circ}$ azimuth angles. The azimuth error of the correlative interferometer direction finder on the model was measured to be less than $1.0^{\circ}$ when SNR was larger then 3dB, and it could be very useful for the design of the direction finder on airplane.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.249-255
• /
• 2015

In this paper, we present an azimuth error analysis for the correlative interferometer direction finding. The correlative interferometer is a direction finding method that compares the theoretical and measured phase differences. The direction of the radio transmitter can be estimated by obtaining the maximum correlation between two data sets. We used a 5-element circular array antennas arranged in a circle. To derive the correlation function between antenna elements, we assume that the incident plane wave arrives from a certain angle and the phase difference of each antenna can be derived by comparing with the reference. The suggested direction finding gives a relatively accurate result even if the radio transmitter is located in the higher altitude.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.53-58
• /
• 2017

This paper describes the design of a simulator for analyzing the accuracy of a correlative interferometer(CI) direction finder. CI direction finder is robust to noise, so it is often used in aircraft or ships where complex antenna installation is required, and the direction finding accuracy is very high. When the radio wave is incident at a specific azimuth angle, the phase difference calculated in a noiseless environment and the phase difference measured in a real environment with noise are fused to estimate the largest correlation coefficient as the azimuth angle of the radio wave. The simulator receives RF frequency, the number of antennas, the antenna coordinates, the transmission signal intensity, the bandwidth of the receiver, the gain and the payload effect, and calculates the direction finding accuracy of 0-360 degrees azimuth and 0-60 degree elevation with 0.5 degree. accuracy.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.219-224
• /
• 2001

Spectral phase interferometry for direct electric-field reconstruction (SPIDER) was fabricated and used to characterize pulses from a Ti:sapphire oscillator. In the SPIDER apparatus, two replicas of the input pulse were generated with a time delay of 200 fs and were upconverted by use of sum-frequency generation with a strongly chirped pulse using a 8-cm-long SFIO glass block at a 30-11m-thick type II BBO (p-BaBz04) crystal. The resulting interferogram was recorded with a UV-enhanced CCD array in the spectrometer. The spectral phase was retrieved by SPIDER algorithm in combination with independently measured pulse spectrum and the corresponding temporal intensity profile was reconstructed with a duration of 19 fs. As an independent cross-check of the accuracy of the method, we compared the interferometric autocorrelation (lAC) signal calculated from the SPIDER data with a separately measured lAC. The conventional, but unjustified, method of fitting a sechz pulse to the autocorrelation deceivingly yielded a pulse duration of 15 fs. This systematic underestimation of the pulse duration affirms the need for a complete characterization method. From the consideration in this paper, we concluded that the SPIDER could provide an accurate characterization of femtosecond pulses. ulses.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.15-22
• /
• 1998

The goal of this paper is to propose analyzing and evaluating method of power parameters for motor drive system with various experimental graphic screens and numerical results and to develop the proposed system. A developed system is made up 586-PC and DSP board, motor drive system, power parameters analyzing and evaluating software for windows. Power parameters are analyzed using correlation signal processing techniques based on the correlation between voltage and current waveforms. Analysis results are visualized by 3-D current coordinates, and it is compared and evaluated with conventional time/ frequency domain. To verify the validity of the proposed system, capacitor run type single phase induction motor and thyristor speed controller is used for analyzing. Power and harmonic parameters of motor drive system is analyzed and verified, with varying fire angle of thyristor speed controller, and the proposed approach is to confirm validity.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.39-45
• /
• 2004

Experiments were performed in a two-phase swirling spray facility that has been described elsewhere. Measurements of spray transport and drop size distribution are analyzed over wide ranges of air to liquid mass flow ratios, utilizing four different internal mixing pneumatic nozzles. The spatial distributions of mean velocities. fluctuating velocities, and velocity-diameter correlation were quantitatively analyzed. Also, the exponential correlation curves were obtained with ALR along the spray centerline, which indicated an approximately identical formulation regardless of ALR. It indicated that the atomization characteristics were remarkably superior in the case of 30o of swirl angle with higher ALR. Among other things. nozzle configuration is one of the significant parameters affecting spray phenomena from an internal mixing nozzle. Turbulence intensities are increasingly degenerated with an increase of nozzle configuration, allowing a rapid increment of drop size distribution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1194-1199
• /
• 2007

본 연구에서는 도시배수관망의 간략화 모의 시 지선을 단순 생략하는 것이 아니라 2차원 관망을 1차원으로 전환시키는 방법인 등가하천 개념을 도입하여 도시유역의 유출량 산정에 있어서 여러 지선들을 개별적으로 모의하지 않으면서도 실제 존재하는 지선들의 효과를 고려할 수 있는 방법을 개발하고자 하였다. 자연하천에 대해 개발된 등가하천 개념은 최근의 수문모형의 경향인 물리적 분포형 모형의 복잡성을 피하면서 전통적인 개념적 집중형 모형이 가지는 간편성을 살리고 그 것이 가지고 있는 선형가정의 한계를 극복하기 위한 방안으로서 제안된 방법이다. 등가하천 개념을 도입하여 개발된 모형은 종국적으로 강우-유출관계에 있어서 강우의 크기, 선형 및 비선형성, 유역면적 등이 미치는 영향을 분석하기위한 도구로 개발되었으며, 본 연구에서는 출구로부터 동일 거리 s에 위치한 지점에서의 배수관망의 공간적인 분포 및 집중패턴을 파악하는 폭함수(width function, n(s))와 면적함수(area function, M(s))를 이용하여 관망을 간략화 하였다. 등가관의 수리기하조건 결정은 유역이 정상상태에 도달했을 경우에 대해서 이루어지게 되며 정상상태 모의를 통해 개별 관망단면들에 대해 얻어진 유량(Q), 면적(A), 수심(y) 자료간의 상관관계를 유추하여 Q(A), A(y) 함수를 유도하게 되면 종국적으로 관로홍수추적에 이용되는 지배방정식의 매개변수인 파속계수(c) 및 확산계수(D)를 계산할 수 있게 된다. 본 연구에서는 대상 유역으로 군자 배수구역을 선정하여 유역의 특성과 관망 자료를 수집하고 간략화 기법을 적용한 결과를 분석 하였다.다. 21세기 문화산업에서 우리가 판단하게 될 디자인의 가치는 계몽의 원리에 대한 '역사성'과 '현재성'의 변증법에 달려있는 것이며, 새로운 철학, 새로운 문명, 새로운 세계를 열어가는 것이다.r$ (地理志)에는 추현리와 이미 외리를 언급하면서 상주의 자기제작의 위상을 짐작하는 기록이 언급되면서 전국의 상품의 절반을 담당하고 있었음을 알 수 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 상주가 8곳으로 1/3의 자기 생산을 담당하고 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다. 이러한 현상은 첫째, 15세기