• Title/Summary/Keyword: 삽입재 크기

Search Result 63, Processing Time 0.027 seconds

A study on characteristics of High Efficiency and Wideband Microstrip Band Pass Filter for Wireless Data Communication (무선데이터 통신을 위한 고효율 광대역 마이크로스트립 대역통과 필터 특성에 관한 연구)

  • Lee, Young-Hun;Song, Sung-Hae;Park, Won-Woo;Lee, Sang-Jae
    • Journal of IKEEE
    • /
    • v.12 no.4
    • /
    • pp.225-233
    • /
    • 2008
  • This paper presents a compact, low insertion loss, sharp rejection and wide band microstrip band pass filter that is composed rectangular loop resonator and step-impedance-open-stub(SIOS) for wireless data communication. The SIOS can be reduce length about 30% more than general 0.25${\lambda}$ stub. And stubs can have the advantage of tuning impedance magnitude. In order to demonstrate agrement of this paper prove, the optimized wide band pass filters are realized and experimented. A transmission line model used to calculate the frequency response of the new filters shows good agreement with measurements. The filter with perturbation stubs has four poles at rejection band, the poles are excited 3.610GHz, 4.265GHz at low frequency band, 8.494GHz, 9.056GHz at high frequency band. And the filter has 3dB fractional bandwidth of 57%(3.695GHz), an insertion loss of better than 0.37dB from 4.549GHz to 8.244GHz, and two rejection of greater than 30dB within 237MHz(4.312GHz${\sim}$ 4.549GHz) at low frequency band, 234MHz(8.244GHz-8.491GHz) at high frequency band.

  • PDF

Synthesis and Characterization of High Impact Polystyrene/Organically Modified Layered Silicate Nanocomposites (내충격성 폴리스티렌과 유기화 층상 실리케이트 나노복합체의 합성 및 특성)

  • 김관영;임효진;박상민;이성재
    • Polymer(Korea)
    • /
    • v.27 no.4
    • /
    • pp.377-384
    • /
    • 2003
  • High impact polystyrene/organically modified layered silicate (HIPS/OLS) nanocomposites by in situ polymerization were synthesized to investigate the effect of clay on the particle size and properties of rubber. In the OLS, the montmorillonite having benzyl group showed best dispersion in polystyrene phase. With the addition of clay, the intercalated peak from XRB was confirmed, but the peak gradually shifted to lower angle as rubber concentration increased. Thus, it is speculated that the organoclay disperses better in rubber phase than in polystyrene phase. The average rubber particle size increased and the particle size distribution widened as the amount of clay increased, which may be caused by the increase of the viscosity ratio of rubber to polystyrene phases and the unstable dispersion. The materials having clay showed improved thermal properties from thermogravimetric analysis. Rheological properties such as complex viscosity and storage modulus increased as the amount of clay increased.

Mitral Valve Replacement with Chordal Preservation in Mitral Stenotic Disease (승모판막 협착 질환에서 건삭보존 치환술에 대한 연구)

  • 김태호;김공수;구자홍
    • Journal of Chest Surgery
    • /
    • v.32 no.1
    • /
    • pp.10-15
    • /
    • 1999
  • Background: Mitral valve replacement with chordal preservation in patients with mitral regurgitation has been proved to be beneficial for left ventricular function and for reduction of postoperative complication. However, in patients with mitral stenosis, the effectiveness of the technique is controversial. It is not easy to insert prosthetic valve without left ventricular outflow tract obstruction and prosthetic valve leaflet motion hinderance. Material and Method : Five patients with mitral stenosis and seven patients with mitral stenoinsufficiency underwent mitral valve replacement with preservation of mitral subvalvular apparatus. Thickened and calcified leaflets are made thin by peeling off the thickened and calcified part. Commissurotomy was done and anterior leaflet was incised 2 mm apart from the annulus and then divided into two segments. Anterolateral and posteromedial segments including strut chordae, were reattached to mitral commissural area, respectively. Result: There was no evidence of prosthetic valve dysfunction, paravalvular leakage, left ventricular outflow tract obstruction, complications and operative or late deaths. Conclusion: We conclude that mitral vlave replacement with chordal preservation was safe and effective technique for the patients with mitral stenotic disease.

  • PDF

Dual-Band Monopole Antenna Design with Mu-Negative Metamaterial Unit Cell (Mu-Negative Metamaterial 단일 셀을 가진 듀얼 대역 모노폴 안테나 설계)

  • Lee, Sang-Jae;Lee, Young-Hun
    • Journal of IKEEE
    • /
    • v.21 no.3
    • /
    • pp.219-226
    • /
    • 2017
  • This paper was studied the double-band monopole antenna design with Mu-negative metamaterial unit cell, which operates at 700MHz and 2.45GHz band. Mu-negative unit cell made of the interdigital capacitor structure to operate a double-band antenna by inserting it into an antenna radiator unit. In addition, the parasitic conductor is implemented on the back side of the antenna radiation part, so that the resonance point of the antenna can be controlled and the bandwidth is improved. Finally, we implemented an antenna operating in the 750MHz UHD band and the 2.45GHz WiFi band. The designed antenna has a size of $200{\times}100mm^2$. Experimental results show that the 8dB bandwidth and gain characteristics at 750MHz band are 320MHz(42.7%), 5.28dB, 6dB bandwidth and gain at 2.45GH are 540MHz (21.6%), -0.46dB. From the experimental results, we confirmed that the resonance point with theoretical value is in agreement with experimental value, and the radiation patterns are have the omnidirectional characteristic in both bands.

Numerical Optimization of NRZ 40Gbps WDM systems (NRZ 방식을 이용한 40Gbps WDM 시스템의 최적화)

  • Lee, Jong-Hyung;Han, Dae-Hyun;Lee, Yong-Jae;Choi, Byeong-Yoon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.10
    • /
    • pp.1860-1865
    • /
    • 2008
  • 40Gbps WDMSystems have been studied by numerical simulation to optimize their performance. Standard single mode fiber is assumed, and the most popular modulation format, NRZ, is used for the study. These assumptions are valid when existing WDM systems are required to upgrade their performance to 40Gbps. It is shown that the standard single mode fiber can transmit optical signals over 4800 (BER < 10-15) by optimizing optical and electrical filter characteristics at the receiver and by compensation of dispersion. In addition, when the system performance is mainly limited by ASE noise of EDFAs, it is found that flattop-shaped optical filter at the receiver gives a better result than Gaussian-shaped filter unless the insertion loss of the optical filter is larger than 5dB.

Survival Rate on the Small Cyprinidae by PIT Tagging Application (소형 잉어과 어류의 PIT tag 적용을 위한 생존율 평가)

  • Jang, Min-Ho;Yoon, Ju-Duk;Do, Yuno;Joo, Gea-Jae
    • Korean Journal of Ichthyology
    • /
    • v.19 no.4
    • /
    • pp.371-377
    • /
    • 2007
  • The passive integrated transponder (PIT) telemetry is a useful method for investigating fish population dynamics, community structure and migration. It can be applied for small fishes (TL<100 mm) because of its tiny size and light weight. The survival rate of PIT tag was investigated on 4 small size cyprindae fish species, Carassius gibelio langsdorfi (n=34, standard length; $91.9{\pm}0.9mm$, body weight; $21.2{\pm}0.9g$), Hypophthalmichthys molitrix (n=16, SL; $75.1{\pm}0.9mm$, BW; $6.0{\pm}0.2g$), Pseudorasbora parva (n=30, SL; $51.4{\pm}1.1mm$, BW; $2.7{\pm}0.2g$) and Phoxinus phoxinus (n=37, SL; $70.6{\pm}1.4mm$, BW; $8.2{\pm}0.5g$) under age 1 for applicability and effectiveness. We used three type tags including a small (length 11.0 mm, diameter 2.1 mm, weight 0.088 g), middle (20 mm, 3.5 mm, 0.102 g), large (30 mm, 3.5 mm, 0.298 g) size. After 30 days of tag insertion, survival rate of 117 individuals were 58.1% (large tag, 50.0%; middle tag, 57.5%; small tag, 61.4%). Survival rates varied between three types of tags because the abdominal cavity of each individual was different size. The death was due to surgical damage. If we apply tagging systems on field research of the Korean freshwater fish, the PIT tag will be effective method for analyzing fish ecology.

Computed tomographic evaluation of experimental hydronephrosis treated with transarterial embolization of renal artery in Beagle dogs (신장동맥 색전술을 실시한 실험적 수신증의 전산화 단층촬영)

  • Chang, Dongwoo;Yoon, Junghee
    • Korean Journal of Veterinary Research
    • /
    • v.41 no.3
    • /
    • pp.421-427
    • /
    • 2001
  • This study was performed to evaluate the embolized kidney and contralateral normal kidney using computed tomography (CT) and enhanced computed tomography. Experimental hydronephrosis was induced by ligation of unilateral ureter in Beagle dogs. Renal artery embolization was performed using selective catheterization in the hydronephrotic kidney of seven dogs and EKG, $SpO_2$, body temperature, pulse, and repiratory rate were within normal ranges during procedures. Iohexol-ethanol solution was used as embolic material. There were no dogs expired after TAE-Ra and no side effects associated with regurgitation of iohexol-ehtanol solution. Revascularization of renal artery was not found in angiography in dogs treated by TAE-RA at immediately after TAE-RA and 14 days after TAE-RA. CT showed dilation of urinary collection system and ventral displacement of spleen at 14 days after TAE-RA in one dog not treated by TAE-RA and experimental group treated by TAE-Ra. CT two month after TAE-RA showed the shrunken embolized kidney in experimental group. Transverse CT with contrast enhancement demonstrated the increase of signal intensity at thinned renal cortex in control group not treated by TAE-Ra at 30 days and 60 days, however, there was no increase of signal intensity at shrunken embolized kidney at 60 days after TAE-RA. CT was useful modality for evaluation of the morphology and the size of embolized kidney and contralateral normal kidney. Enhanced CT was availabel for the detection of revascularization of renal artery after TAE-RA in dogs with hydronephrosis. It is conclued that CT is useful modality for the monitoring of the revascularization of the renal artery after TAE-RA.

  • PDF

Cloning, Sequencing and Expression of the Gene Encoding a Thermostable β-Xylosidase from Paenibacillus sp. DG-22 (Paenibacillus sp. DG-22로부터 열에 안정한 β-xylosidase를 암호화하는 유전자의 클로닝, 염기서열결정 및 발현)

  • Lee, Tae-Hyeong;Lee, Yong-Eok
    • Journal of Life Science
    • /
    • v.17 no.9 s.89
    • /
    • pp.1197-1203
    • /
    • 2007
  • A genomic DNA library of the bacterium Paenibacillus sp. DG-22 was constructed and the ${\beta}-xylosi-dase-positive$ clones were identified using the fluorogenic substrate $4-methylumbelliferyl-{\beta}-D-xylopyr-anoside$ $({\beta}MUX)$. A recombinant plasmid was isolated from the clone and 4.3-kb inserted DNA was sequenced. The ${\beta}-xylosidase$ gene (xylA) was comprised of a 2,106 bp open reading frame (ORF) en-coding 701 amino acids with a molecular weight of 78,710 dalton and a pI of 5.0. The deduced amino acid sequence of the xylA gene product had significant similarity with ${\beta}-xylosidases$ classified into family 52 of glycosyl hydrolases. The xylA gene was subcloned into the pQE60 expression vector to fuse with six histidine-tag. The recombinant ${\beta}-xylosidase$ $(XylA-H_6)$ was purified to homogeneity by heat-treatment and immobilized metal affinity chromatography. The pH and temperature optima of the $XylA-H_6$ enzyme were pH 5.5-6.0 and $60^{\circ}C$, respectively.

Preparation and Characterization of Ipriflavone-Loaded Poly(L-lactide-co-glycolide) Scaffold for Tissue Engineered Bone (조직공학적 골을 위한 애프리플라본을 함유한 다공성 지지체의 제조 및 그 특성)

  • Jang, Ji-Wook;Lee, Bong;Han, Chang-Whan;Lee, Il-Woo;Lee, Hai-Bang;Khang, Gil-Son
    • Polymer(Korea)
    • /
    • v.27 no.3
    • /
    • pp.226-234
    • /
    • 2003
  • Ipriflavone (IP), a non-hormonal isoflavone derivative, has been shown to interfere with bone remodeling by inhibiting bone resorption and stimulating bone formation. IP consistently increased the amount of Ca incorporated into the cell layer by mesenchymal stem cells (MSCs). In this study, we developed the novel IP loaded poly(L-lactide-co-glycolide) (PLGA) scaffolds for the possibility of the application of the tissue engineered bone. IP/PLGA scaffo1ds were prepared by solvent casting/salt leaching method and were characterized by porosimeter, scanning electron microscopy, determination of residual salt amount, differential scanning calorimetry, and X-ray diffractometer, respectively. IP/PLGA scaffolds were implanted into the back of athymic nude mouse to observe the effect of IP on the osteoinduction compared with control PLGA scaffo1ds. Thin sections were cut from paraffin embedded tissues and histological sections were stained H&E, von Kossa, and immunohistochemical staining for Type I collagen and osteocalcin. It can be observed that the porosity was above 91.7% and the pore size was above 101 $\mu\textrm{m}$. Control scaffo1d and IP/PLGA scaffo1ds of 50% IP were implanted on the back of athymic nude mouse to observe the effect of IP on the induction of cells proliferation for 9 weeks. The evidence of calcification, osteoblast, and osteoid from the undifferentiated stem cells in the subcutaneous sites and other soft connective tissue sites having a preponderance of stem cells has been observed. From these results, it seems that IP plays an important role for bone induction in IP/PLCA scaffolds.

A Region-based Comparison Algorithm of k sets of Trapezoids (k 사다리꼴 셋의 영역 중심 비교 알고리즘)

  • Jung, Hae-Jae
    • The KIPS Transactions:PartA
    • /
    • v.10A no.6
    • /
    • pp.665-670
    • /
    • 2003
  • In the applications like automatic masks generation for semiconductor production, a drawing consists of lots of polygons that are partitioned into trapezoids. The addition/deletion of a polygon to/from the drawing is performed through geometric operations such as insertion, deletion, and search of trapezoids. Depending on partitioning algorithm being used, a polygon can be partitioned differently in terms of shape, size, and so on. So, It's necessary to invent some comparison algorithm of sets of trapezoids in which each set represents interested parts of a drawing. This comparison algorithm, for example, may be used to verify a software program handling geometric objects consisted of trapezoids. In this paper, given k sets of trapezoids in which each set forms the regions of interest of each drawing, we present how to compare the k sets to see if all k sets represent the same geometric scene. When each input set has the same number n of trapezoids, the algorithm proposed has O(2$^{k-2}$ $n^2$(log n+k)) time complexity. It is also shown that the algorithm suggested has the same time complexity O( $n^2$ log n) as the sweeping-based algorithm when the number k(<< n) of input sets is small. Furthermore, the proposed algorithm can be kn times faster than the sweeping-based algorithm when all the trapezoids in the k input sets are almost the same.