• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.39-46
• /
• 2008

The purpose of this study was to assess the cariogenic potential of infant confectionaries. In vitro, as compaired with 10% sucrose solution and whole bovine milk. Buffering capability were determined by amount of 0.1N lactic acid consumed to titrate the 50ml specimen solutions to pH 4.0. The pH of the specimen solution inoculated by streptococcus mutans was measured by pH meter and the surface microhardness tester, before and after 48 hours incubation. The buffering capacity of infant confectionaries was higher than that of sucrose solution and lower than that of milk, and there were significant difference between infant confectionaries(p<0.05). The pH of infant confectionaries after 48 hours incubation was similar to 10% sucrose solution, and there were significant difference between infant confectionaries and milk(p<0.05). The microhardness change of primary tooth enamel of infant confectionaries group after 48 hours incubation was similar to that of 10% sucrose solution, and there were significant difference between infant confectionaries and milk(p<0.05). In conclusion, infant confectionaries seemed to have the ability to cause dental caries in primary teeth, and there were significant differences of cariogenic potential among infant confectionaries. Cooperative efforts of dentistry and manufacturers to reduce the cariogenic potential of infant confectionaries would be necessary to prevent the early childhood caries in children.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.290-299
• /
• 2011

Objectives: The usage of fluoride varnish for a moderate to low caries-risk group has not been well validated. This study aimed to evaluate the preventive and therapeutic efficacies of fluoride varnish on the initiated root caries. Materials and Methods: Ten premolars were sectioned into quarters, further divided into two windows, one of which was painted with Fluor Protector (1,000 ppm fluoride, Ivoclar Vivadent). An initial lesion with a well-preserved surface layer was produced by pH cycling. Scanned line analysis using energy dispersive spectrometry determined the weight percentages of Ca and P in the demineralized layer. Scanning Electron microscopy and confocal laser scanning microscopy (CLSM) evaluated the varnish-applied root surfaces. Results: The mean lesion depth (SD) was 12.3 (2.6) ${\mu}m$ (single cycling) and 19.6 (3.8) ${\mu}m$ (double cycling). Double cycling extended the lesion depth, but induced no more mineral loss than single cycling (p < 0.05). The mean weight percentages of Ca and P between groups with and without varnish were not significantly different (p < 0.05). A CLSM showed varnish remained within 15 ${\mu}m$ of the surface layer. Conclusions: When a mild acid challenge initiated root tissue demineralization, the application of low-concentration fluoride varnish did not influence the lesion depth or the mineral composition of the subsurface lesion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.48-55
• /
• 1968

1958년(年) Fullmer와 $Lillie^9$에 의(依)하여 최초(最初)로 보고(報告)된 Oxytalan 섬유(纖維)는 산(酸)에 내성(耐性)이 강(强)한 섬유(纖維)로 치근막(齒根膜)에 많이 출현(出現)하고 기계적(機械的) 자극(刺戟)에 의(依)하여 배열(配列), 주행(走行) 및 수적(數的)인 변화(變化)를 가져온다. 저자(著者)는 교정력(矯正力)을 이용(利用)하여 치아(齒牙)를 이동(移動) 시킨후(後) 치근막내(齒根膜內) Oxytalan섬유(纖維)의 수(數), 주행(走行) 및 형태(形態)의 변화(變化)를 실험적(實驗的)으로 관찰(觀察)한바 있어 이를 보고(報告)하는 바이다. 본연구(本硏究)에 사용(使用)된 실험동물(實驗動物)로는 체중(體重) 60gram내외(內外)의 자성백서(雌性白鼠) 15마리를 택(澤)하였다. 각동물(各動物)은 Ether마취후(麻醉後) 교정용(矯正用) 고무줄편(片)을 상악우측(上顎右側) 제1구치(第一臼齒)와 제2구치(第二臼齒) 사이에 삽입(揷入)하여 24, 48, 72시간(時間) 간격(間隔)으로 관찰(觀察)하였다. 동물(動物)을 도살후(屠殺後) 상악골(上顎骨)을 적출(摘出)하여 10%중성(中性) 호루마린에 고정후(固定後) 3%의산(蟻酸)으로 탈회(脫灰)하였다. 파라핀 포매후(包埋後) 근원심적(近遠心的)으로 $4{\sim}6{\mu}$의 절편(切片)을 만들어 Hematoxylin-eosin 및 Aldehyde fuchsin염색(染色)을 시행(施行)하여 경험(鏡險)한 결과(結果)는 하기(下記)와 같다. 1. 치아이동후(齒牙移動後) 교원성섬유(膠原性纖維) 및 Oxytalan섬유(纖維)들의 배열(配列)에 있어 뚜렷한 차이(差異)를 보였다. 2. 치아이동후(齒牙移動後) 사주섬유(斜走纖維)는 염박측(壓迫側)에서는 치아장축(齒牙長軸)에 수직(垂直)되게, 견인측(牽引側)에서는 평행(平行)되게 주행(走行)하고 있었다. 3. 48시간군(時間群)에서 세포증식(細胞增殖)이 심(甚)하였다. 4. Oxytalan섬유(纖維)는 치아(齒牙)들에 교정력(矯正力)을 가(加)한후(後) 견인(牽引) 염박(壓迫) 양측(兩側) 공(共)히 수(數)가 증가(增加)하였다. 5. 염박측(壓迫側)에서 Oxytalan섬유(纖維)는 속(束)을 형성(形成)하며 치아장축(齒牙長軸)에 평행(平行)되게 주행(走行)하였다. 6.견인측(牽引側)에서는 하나 또는 두세개의 섬유(纖維)들이 산발적(散發的)으로 치아장축(齒牙長軸)에 평행(平行)되게 하였다. 7. Oxytalan섬유(纖維)의 수(數)는 염박측(壓迫側)에서 보다 견인측(牽引側)에서 더 변화(變化)가 많았다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.186-192
• /
• 2010

Streptococcus mutans, one of the major causal agents of dental caries, is component of the dental plaque. It produces various organic acids such as lactic acid which is the end-product of glycolysis, and this leads to dental caries. A new system using species-specific monoclonal antibodies was developed to detect Streptococcus mutans in saliva. The system quickly detects salivary Streptococcus mutans in 30min and classifies the result into two levels. The purpose of this study was to investigate correlation between monoclonal antibody-based detecting system and selective medium-based detecting methods. Children's deft indices were also compared with Streptococcus mutans counts in MSB agar plate. Subjects consisted of 15 children in the age of 3 to 6 years. They were assigned to three groups : Group I(deft index = 3), Group II(deft index $\leqq$3), Group III(deft index $\geqq$4). The results are as follows : 1. The rate of children with positive response was 13.3% and with negative response was 86.7% in the result of Saliva-checkTM Mutans test kit. 2. There was a positive correlation between monoclonal antibody-based detecting system and selective medium-based detecting methods(p<0.05). 3. Streptococcus mutans counts in MSB agar plate were irrelevant to deft of children(p=0.34).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.569-578
• /
• 2004

The purpose of this study was to clarify the palatal arch length, width and height in the primary and permanent dentition. Samples were consisted of normal occlusions both in the primary dentition(50 males and 50 females) and in the permanent dentition(50 males and 50 females). With their upper plaster casts were used and through 3-dimensional laser scanning(3D Scanner, DS4060, LDI, U.S.A.), cloud data, polygonization, section curve and loft surface, fit and horizontal plane were based to measure the palatal arch length, width and height(Surfacer 10.0, Imageware, U.S.A.). T-tests were applied for the statistical analyze of the data. The results were as follows : 1. In the measurement values, the values of the male were higher than those of the female except primary anterior palatal height. There were not only statistically significant differences in anterior palatal width(p<0.05) and posterior palatal width(p<0.01) in primary dentition but palatal width(p<0.05), anterior palatal length(p<0.01), middle and posterior palatal length(p<0.05) in permanent dentition between male and female. 2. In the indices of palate, there were statistically significant differences in height-length index(p<0.05) and width-length index(p<0.01) between male and female in primary dentition. In permanent dentition, there was statistically difference between male and female. 3. In the measurement values, posterior palatal width was increased most greatly. Posterior palatal height, anterior palatal width and anterior palatal length were followed by descending order. On the other hand, anterior palatal height and posterior palatal length were decreased. 4. In the indices of palate, the height-length index, the width-length index and posterior height-width index were increased, but the others were decreased.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.597-609
• /
• 2014

To find out the effect of commercially available energy drinks on tooth enamel erosion, analyzed pH, buffering capacity, and the content of some of the inorganic components selecting 4 energy drinks that has high affinity of the products currently being sold. In addition, by observing the degree of erosion before and after immersion in energy drink by surface microhardness and scanning electron microscope (SEM) the results were as follows: Acidity of energy drink 'Burn Intense' was the lowest as $2.78{\pm}0.01$ highest on distilled water as $6.475{\pm}0.01$. 'Burn Intense' buffering capacity was $3.48{\pm}0.155$ at pH 5.5, $1.88{\pm}0.15$ at pH 7.0 which is the highest, and 'Hot6' was $1.71{\pm}0.37$, $1.23{\pm}0.35$ on each of it showing the lowest points. Ca content on energy drink was the highest at 'Volt Energy' as ($77.21{\pm}2.70mg/kg$), the lowest at 'Hot6' as ($0.98{\pm}0.05mg/kg$). P content was the highest on 'Hot6'($1.34{\pm}0.05mg/kg$) and detected at 'Red Bull'. Enamel surface hardness variation of the energy drinks before and after immersion showed rapid decrease at 'Red Bull' ($66.65{\pm}35.60$), and 'Volt Energy' ($61.96{\pm}31.42$), 'Burn Intense' ($58.53{\pm}24.84$), 'Hot6' ($53.99{\pm}60.26$) was in order. Distilled water, the control group, showed significant difference with the experimental group (p<0.05). But there was no significant difference between energy drinks. At SEM observation and analysis, 'Burn Intense' was the most severe demineralization, 'Volt Energy', 'Hot6', 'Red Bull', distilled water was in order. In the above results, taken together there were no statistically differences between energy drinks but significant difference in comparison with distilled water. In addition, at SEM observation and analysis all energy drink caused dental erosion, especially 'Burn Intense', has the lowest acidity, was serious. Thus, it is believed to provide a variety of oral health education and information about energy drinks that can affect the erosion of the teeth so public have the right to be recognized and reasonable dental care.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.107-115
• /
• 2002

The aim of this study was to investigate experimentally the mechanical and histological effect of drilling process on the stability of micro-implant used for the orthodontic anchorage. For this purpose, 32 micro-implants(Osas$^{(R)}$, Epoch medical, ${\phi}$1.6 mm) were inserted into maxilla, mandible and palate in two beagle dogs. 16 micro-implants(8 per dog) were inserted after drilling with pilot drilling bur (drill method group). 16 micro-implants(8 per dog) were inserted without drilling (drill-free method group). After 1 week, micro-implants were loaded by means of Ni-Ti coil spring (Ni-Ti springs-extension$^{(R)}$, Ormco) with 200-300 gm force. Following 12 weeks, the micro-implants and the surrounding bone were removed. Before sacrifice, the mobilities were tested with Periotest$^{(R)}$(Siemens). Undecalcified serial sections with the long axis were made and the histologic evaluations were done. The results of this study were as follow ; 1. The osseointegration was found in both of drill-free method group and drill method group 2. Two of drill method group and one of drill-free method group in 32 micro-implants were lost after loading. 3. The mobilities of drill-free method group were less than drill method group 4. The bone contact on surface of micro-implants in drill-free method group was more than drill method group but there was no significant difference between groups. 5. The bone density in threads of micro-implants in drill-free method group was more than drill method group and there was significant difference between groups. These results suggest that drill-free method in insertion of micro-implants is superior to drill method on the stabilities, bone remodeling and osseointegrations under early loading.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.337-349
• /
• 2008

Despite an improved bone reactions of Mg-incorporated implants in the animals, little yet has been carried out by the experimental investigations in functional loading conditions. This study investigated the clinical and histologic parameters of osseointegrated Mg-incorporated implants in delayed loading conditions. A total of 36 solid screw implants (diameter 3.75 mm, length 10mm) were placed in the mandibles of 6 beagle dogs. Test groups included 18 Mg-incorporated implants. Turned titanium Implants served as control. Gold crowns were inserted 3 months. Radiographic assessments and stabilitytests were performed at the time of fixture installation, $2^{nd}$ stage surgery, 1 and 3 months after loading. Histological observations and morphometrical measurements were also performed. Of 36 implants, 32 displayed no discernible mobility, corresponding to successful clinical function. There was no statistically significant difference between test implants and controls in marginal bone levels (p=0.413) and RFA values. The mean BIC % in the Mg-implants was $54.4{\pm}20.2%$. The mean BIC % in the turned implant was $48.9{\pm}8.0%$. These differences between the Mg-implant and control implant were not statistically significant (P=0.264). In the limitation of this study, bone-to-implant contact (BIC) and bone area of Mg-incorporated oxidized implant were similar to machine-turned implant. The stability analysis showed no significantly different ISQ values and marginal bone loss between two groups. Considering time-dependent bone responses of Mg-implant, it seems that Mg-implants enhanced bone responses in early loading conditions and osseointegrated similarly to cp Ti implants in delayed loading conditions. However, further investigations are necessary to obtain long-term bone response of the Mg-implant in human.