• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.741-747
• /
• 2010

Vent-relief valve performed as a safety-valve combination for liquid propellant feeding system of space launch vehicle, which can vent the vaporized oxygen vapor during both filling cryogenic oxidizer into tank and flight. We have designed vent-relief model by using the AMESim code to predict dynamic characteristics and simulate pneumatic behavior of valve. To validate valve model we have compared by opening time in vent model, and opening/closing pressure by mathematical methods and improved the accuracy through numerical flow analysis by using FLUENT code. In this study, we had verified design parameters and analyzed operating performances. We can use these analysis results to precedent development study on propellant feeding system of Korea Space Launch Vehicle.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.721-724
• /
• 2011

A system to pressurize propellants stored in propellant tanks is necessary to feed liquid-propellants into combustion devices at the required pressure and flowrate without having cavitation in turbo-pumps. A pressurization system can be categorized into pre-pressurization stage and main-pressurization stage. This report is regarding to a main-pressurization system. Pressurization methods for propellant tanks are divided into pressurant gas generating method and pressurant gas feeding method. One of pressurant gas generating methods uses the vaporized oxygen gas from cryogenic liquid oxygen and non-flammable gas. In this report, both advantages and disadvantages for pressurization methods and types of pressurization systems are compared. Especially the characteristics and principle of pressurization system using impulsive control strategy applied in launch vehicles are introduced. Additionally the structure, schematics, and specifications of heat exchanger, which is one of main units in pressurization system are also discussed. This paper can be utilized to generate the conceptual requirements and to design preliminary configuration of pressurization system during the development of launch vehicle.

• Journal of the Korean Ceramic Society
• /
• v.11 no.4
• /
• pp.5-18
• /
• 1974

본 연구에 있어서는 연료유의 연소에 의한 내화물의 부식을 연구하기 위하여 시멘트소성용 회전가마, 보일러 및 판유리제조용 탱크가마에 쓰이는 여러 내화물을 짤라서 그 가운데에 구멍을 파고 중유재의 주성분인 V2O5, Na2CO3, Fe2O3, Fe 및 황산철을 미리 그 구멍속에 넣어 응용 확산시킨 다음 이들을 그들의 상용온도인 145$0^{\circ}C$로 황 함유량이 다른 연류유로 소성하여 얻은 결과는 다음과 같다. 일반적으로 5산화 바나듐-알루미나, 고알루미나질 및 염기성 내화물; 산화나트륨-고알루미나질, 실리마나이트질 및 염기성 내화물은 2%미만의 황 함유 연류유소성에 의하여 부식이 적고 3.5%이상의 황하유 연료유소성시는 황에 의하여 대개가 침식을 당하였다. 무수 아황산 분위기속에서 규산알루미늄 및 구석계의 내화점토질내화물은 산화철이 환원되어 색이 연해지고 고알루미나질 벽돌은 색이 짙어지는 경향이 있고 산화철은 황산철로 변하여 풍화의 원인이 되어 침식을 당하게 되었고, 소성시간이 길면 길수록 부식은 증가하고 황산소다보다 탄산소다에 의하여 훨씬 더 많이 부식을 당하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.258-263
• /
• 2012

In this paper the Chemical Propulsion Subsystem of COMS is briefly explained and some telemetries acquired by a series operations of CPS during the Launch and Early Operation Phase of COMS are presented. The pressure and temperature of pressurant tank telemetries are compared with the results of the developed computer program. The changes in pressure are due to the two major phases. The first one is the initialization phases of CPS composed of the venting phase to vent the helium gas in the pipe network from the downstream of the propellant tanks to the thrusters for safety, the priming phase to fill the vented pipe network with oxidizer and fuel respectively and then the pressurization phase to pressurize the ullage of propellant tank to regulated pressure. And the other is the apogee engine firings in which COMS CPS is in the orbit raising phase to use helium as a pressurant to keep the pressure of propellant tank as the liquid apogee engine get fired until COMS reached to the target orbit. This program can be applicable to prepare basis design data of the next Geostationary Satellite CPS.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.89-89
• /
• 2003

로켓엔진의 연소에 필요한 추진제를 안정적으로 공급하기 위한 추진제 공급시스템의 주요 구성과 설계 주요 인자를 정리하였다 공급시스템은 추진제 주입/배출 장치, 추진제탱크 가압 및 배기 장치, 추진제 공급 주/분기 배관, 극저온 산화제 온도 유지 장치 등으로 구성되어 있다. 주요 설계 제한 조건으로는 터보 펌프 입구에서의 추진제 압력 및 온도, 필요 추진제 공급 유량 및 온도 그리고 추진제 충진 및 비상 배출 허용 시간 등이며 이는 각 로켓의 해당 임무에 따라 적절히 결정된다. 발사체로부터 할당된 중량값 이내에서 고신뢰도의 작동성, 안정성이 보장되는 시스템을 설계하여야 하며 초기 설계 단계에서 개발 및 수급 가능성을 동시에 고려하여야 할 것이다. 또한 고추력 생성을 위해 엔진 클러스터링이 수행되어야 할 경우 각 엔진으로의 균등한 추진제 배분 공급이 설계의 중요한 요구 조건이 된다. 이러한 공급시스템의 개념은 액체산소와 케로신 조합의 액체 로켓인 100kg급 소형 위성 발사체(KSLV-Ⅰ)에 적용될 예정이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.335-338
• /
• 2009

The process of charging an oxidizer in the liquid propellant rocket can divide into the cooling of the oxidizer tank, the high flow charge, the small flow charge, and the replenishment charge for the correction of temperature. The oxidizer of the Naro(KSLV-I) first stage uses the liquid oxygen. And the flow rate and the temperature specification corresponding to each charge mode are presented for the requirement. The flow throttling valve and heat exchanger are installed in the oxidizer filling system in order to satisfy this kind of the flow rate and temperature requirement specification. In this research, by using the Flowmaster which is a commercial one-dimension thermo-fluidic analysis program, one dimensional flow system analyses was performed to predict the exact flow rate at each specific mode. Also, the flow rate correction sensitivity of the flow control valves was analytically determined to satisfy the flow condition refinement at each mode within the limited certification test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.25-37
• /
• 2005

For pump-fed rocket propulsion system, the temperature of LOX to be supplied to turbopump inlet should be satisfied with pump inlet temperature requirement during all operating stages, as excessive temperatures can result in cavitation due to reduction in NPSH, thus either damaging the pump or adversely affecting pump performance rise. So exact estimation of LOX temperature rise is absolutely needed for developing reliable propulsion system. This paper presents systematic analysis scheme for estimating inner process of cryogenic propellant tank which is needed for LOX temperature rise. And this paper presents LOX temperature rise and thermal stratification for all rocket operating stages including cooling, filling, waiting, pre-pressurization and firing, with the application of buoyancy driven boundary layer theory.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.46-54
• /
• 2015

Nitrous oxide is known as green and safe propellant, and can be supplied by its own vapor pressure. So, many liquid propulsion research institutes and university laboratories use nitrous oxide as oxidizer of experimental liquid rocket engine. However, the unknown explosions occurred twice during hot fire experiments using subscale ethanol/nitrous oxide thruster. In this paper, we surmised that the explosions were caused by the decomposition of nitrous oxide in the injector body and the recondensation of nitrous oxide. Improvement and the safe handling methods are suggested.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.45-49
• /
• 2011

The blow-down oxidizer feed system with self-pressurizing $N_2O$ has more advantages than the regulated system. However, it is difficult to predict the exhaust flow rate because there exist two phases in the $N_2O$ tank - liquid phase and gas phase, and the properties of $N_2O$ in storage tank are varied continuously during blow-down. In this paper, a method that can analyse simply the blow-down oxidizer feed system is studied. The properties of saturated $N_2O$ are found from the NIST data base, and mass flow through the orifice is modeled as NHNE. Cold flow test with hybrid rocket combustor is performed for the comparison where the results should found from the good agreement.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1080-1083
• /
• 2017

In the design of KSLV-II, there is a scenario in which supercooled liquid oxygen is supplied to prevent a geysering phenomenon in the oxidizer pipe and a cavitation phenomenon at the pump inlet. To verify this condition in the engine development test phase, a system that supplies supercooled liquid oxygen to the engine was applied in the engine combustion test facility. In this system, supercooling methods using a vacuum ejector and using helium injection to the tank were appied. Both tests were carried out for about 17 minutes. Supercooling results of about 3.3K for the ejector test and about 2.2K for the helium injection test were obtained at the 50% level of the tank.