• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.267-270
• /
• 2006

An experimental investigation was conducted to study the combustion characteristics of Polyethylene-GOX hybrid motor. Several regression-rate models based on the length average were compared with the experiment data, postulating to treat the mass-addition rate of fuel almost constant to the mass rate of oxidize flowing into combustor.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.3
• /
• pp.95-99
• /
• 2019

In the modified atmosphere packaging of powdered infant formula, the oxygen inside the package may cause its quality deterioration and needs to be minimized for quality preservation. A way of oxygen scavenger inclusion in the single-serve package without contacting the product was devised for removing oxygen residing initially and permeating through the seal layer during the storage. A polyethylene/pulp multi-layer porous filter bag of 5 × 7 cm containing 13 g of powdered infant formula was packaged in an 8 × 9 cm size aluminium laminated film package with a Fe-based oxygen scavenger of 1.8 g. After nitrogen flushed packaging, the active packages were stored at 30℃ for 254 days with periodical quality measurement. The active package could remove the initial residual oxygen of 1.4% completely and maintain absence of oxygen for the whole storage, which contributed to reduced oxidation observed in lower product peroxide value compared to that of the product in the control package. There was no influence of packaging treatment on content of 5-hydroxymethylfurfural, reaction product of initial nonenzymatic browning. The devised oxygen-scavenging single-serve package showed a potential to improve the preservation of infant formula powder and extend the shelf life.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.772-777
• /
• 2003

선박이 배출하는 안정수(ballast water)는 외부로부터 유해 생물들이 유입되어 전파해 오는 주요경로로써 해양환경의 매우 중요하고 위험한 일종의 하나이지만, 이에 대한 효과적인 처리방법은 아직까지도 개발되지 못하였다. 그러나 최근 강 전리방전을 이용하여 고 밀집 산소와 물분자를 고농도 수산자유기(OH: hydroxyl radical)로 전리, 활성입자를 발생시켜 신속히 확산시키면 넓은 범위에서 비교적 낮은 농도로 유해성 침입 생물을 잔류물 없이 저렴한 비용으로 살균제나 촉매제의 사용 없이 소멸시켜 처리하는 효과적인 새로운 녹색방법을 제안하였다. 또한, 수산기는 강 산화제로써(산화환원 전위는 2.80 eV), 적조생물을 신속, 효과적으로 사멸시켜 잔유물과 오염물 발생 없이 이상적으로 해양적조현상을 처리할 수 있는 활성물질이다. 고출력 강 전리장치를 활용하면 수산기 활성제의 발생 농도를 Sr104 이상으로 얻을 수 있으므로, 해양적조처리에 요구되는 문턱 값 농도(~l$\times$$10^{-6}$)를 충족시킬 수 있으며, 이 경우 적조생물 소멸처리시간은 불과 10 sec 내외이므로 선박 안정수 처리문제와 함께 적조발생의 난문제를 해양동력학적으로 동시에 해결할 수 있는 효과적인 기술이다. 실험결과로부터 시간당 1 k톤의 활성물질을 발생하는 수산기활성제 제조장치의 경우, 약 4$\times$$10^2$ $\textrm{km}^2$/h의 적조해면을 처리할 수 있으며, 그 비용은 약 US$l,000 정도에 상당하므로, 적조에 따른 경제손실과는 비교될 수 없는 저렴하고 효과적인 방법이다. 활성물질의 생성시간과 가공시간은 불과 수십 $\mu\textrm{s}$ 및 수 sec 에 불과하므로, 1 kton/h 용량의 수산기활성제 제조장치의 환산소비동력은 약 200 kW이고, 장치의 체적은 10~30 ㎥의 공간으로 충분하므로, 소형선박으로 상당면적의 적조피해를 효과적으로 해결할 수 있다.

• Clean Technology
• /
• v.20 no.3
• /
• pp.212-217
• /
• 2014

In order to regenerate the sulfidated desulfurization sorbent, oxygen is used as the oxidant agent on the regeneration process. The small amount of oxygen un-reacted in regeneration process is flowed into direct sulfur recovery process. However, the reactivity for $SO_2$ reduction can be deteriorated with the un-reacted oxygen by various reasons. In this study, the deactivation effects of un-reacted oxygen contained in the off-gas of regeneration process flowed into direct sulfur recovery process of hot gas desulfurization system were investigated. Sn-Zr based catalysts were used as the catalyst for $SO_2$ reduction. The contents of $SO_2$ and $O_2$ contained in the regenerator off-gas used as the reactants were fixed to 5.0 vol% and 4.0 vol%, respectively. The catalytic activity tests with a Sn-Zr based catalyst were for $SO_2$ reduction performed at $300-450^{\circ}C$ and 1-20 atm. The un-reacted oxygen oxidized the elemental sulfur produced by $SO_2$ catalytic reduction and the conversion of $SO_2$ was reduced due to the production of $SO_2$. However, the temperature for the oxidation of elemental sulfur increased with increasing pressure in the catalytic reactor. Therefore, it was concluded that the decrease of reactivity at high pressure is occurred by catalytic deactivation, which is the re-oxidation of lattice oxygen vacancy in Sn-Zr based catalyst with the un-reacted oxygen on the catalysis by redox mechanism. Meanwhile the un-reacted oxygen oxidized CO supplied as the reducing agent and the temperature in the catalyst packed bed also increased due to the combustion of CO. It was concluded that the rapidly increasing temperature in the packed bed can induce the catalytic deactivation such as the sintering of active components.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.164-167
• /
• 2001

본 연구에서는 포항제철소에서 제철부산물로 발생되는 제강분진을 전처리 없이 산화촉매로 사용하여 김포 수도권 매립지의 침출수 처리공정에서 펜톤산화조에 유입되는 원수를 대상으 로 과산화수소를 이용한 연속식 산화처리 실험을 수행하였다. 먼저 회분식 실험결과를 바탕 으로 최적 반응조건에서 lab-scale 연속식 기초반응실험과 자체 설계.제작한 연속산화공정에서의 처리실험을 수행하였다. 또한 기존의 펜톤산화공정에서 Fe 공급원으로 사용되고 있는 FeSO$_4$.7($H_2O$)와의 반응성 비교실험도 수행하였다. 반응기간동안 일정 pH를 유지하기 위해 pH controller를 사용하였으며 침출수 수질은 CODcr로 나타내었다. 반응 pH 3.5, 체류시간 1 hr, 과산화수소 주입량 1,500mg/1에서 제강분진과 FeSO$_4$.7($H_2O$)를 각각 주입하여 수행한 연속처리 기초실험에서는 제강분진을 산화반응촉매로 사용한 경우에 침출수CODcr 처리율 62%, 과산화수소의 분해율 52%를 나타내었다. FeSO$_4$.7($H_2O$)를 산화반응 촉매로 사용한 경우에는 약 65-70%정도의 다소 높은 처리효율을 나타낸 반면에 과산화수소의 소비량은 제강분진의 경우보다 약 20%이상의 높은 값을 나타내었다. 연속산화공정 실험에서는 운전 3시간 이후에 유출수 중의 CODcr과 $H_2O$$_2$의 농도가 안정된 값을 나타내었다. 이 때 산화 반응조의 침출수 CODcr 제거효율은 약 43%이었으며, 처리수의 농도는 현재의 침출수 방류기준 이하로 나타났다. 결론적으로 침출수의 연속식 산화처리 실험결과, 처리효율과 경제성에서 제강분진의 산화촉매활용 공정의 개발 가능성이 매우 높은 것으로 나타났다.ell에 의해 완전분해 되었으며, 함께 존재시 TC는 Fe$^{\circ}$만으로는 분해가 되지 않았지만 cell에 의해 완전분해 되었으며, 함께 존재시 TCE분해에 저해작용을 미치는 것으로 나타났다.술의 첨가가 요구되고 있다. 따라서, 산성광산배수 오염지대에 대해 획일적으로 같은 처리방법을 채택하여 사용하는 것보다 각 지역 또는 광산산성폐수가 유출되어 나오는 광산폐기물의 특성 등을 고려하여 거기에 맞는 기술들을 복합적으로 또는 단독으로 사용하되 처리방법 채택 시 신중을 기할 것이 요망된다.정시에는 SeaWiFS 위성과 관련된 global algorithms 중에서 490nm와 555nm의 복합밴드를 포함하는 OC2 알고리즘(ocean color chlorophyll 2 algorithm)을 사용하는 것이 OC2 series 및 OC4 알고리즘보다 좋은 추정 값을 도출할 수 있을 것으로 기대된다.환경에서는 5일에서 7월에 주로 이 충체의 유충이 발육되고 전파되는 것으로 추측되었다.러 가지 방법들을 적극 적용하여 금후 검토해볼 필요가 있을 것이다.잡은 전혀 삭과가 형성되지 않았다. 이 결과는 종간 교잡종을 자방친으로 하고 그 자방친의 화분친을 사용할 때만 교잡이 이루어지고 있음을 나타내고 있다. 따라서 여교잡을 통한 종간잡종 품종육성 활용방안을 금후 적극 확대 검토해야 할 것이다하였다.함을 보이고 있다.X> , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물

• KSBB Journal
• /
• v.19 no.2
• /
• pp.154-158
• /
• 2004

Recycled packed-bed reactor emploring immobilized microorganism was suggested in this paper for efficient denitrification. In the batch reactor, the effects of initial oxidation-reduction potential and nitrate concentration on denitrification were investigated. As the initial oxidation-reduction potential was decresed to -70 mV from ＋40 mV, the removal rate of nitrate was increased to 3.33 from 1.25 m9 NO$_3$$\^$-/-N/min under the experimental conditions. As the initial nitrate-N concentraion was increased to 200 mg/l, the removal rate of nitrate was proportional to the concentration of nitrate. When the concentration of nitrate-N was 400 mg/min, nitrite was detected, and when the initial nitrate-N concentration was reached at 1,000 mg/l, it took longer time for the complete nitrate removal. In order to decrease the initial oxidation-reduction potential and the nitrate-N concentration in the feed stream, the effluent was recycled to the influent stream in the packed-bed reactor. In the case of recycling, the initial oxidation-reduction potential was decreased to 30 mV from 150 mV, and the initial nitrate concentration could be decreased to 85 from 120 mg NO$_3$$\^$-/-N/l. As the result of recycling, the removal rate of nitrate was increased to 91.7% from 49.2%.

• Journal of Nutrition and Health
• /
• v.24 no.4
• /
• pp.337-343
• /
• 1991

The effect of 9-methyl folate on histidine oxidation, the uptake of an injected dose of $[^{3}H]folate$ by the livers and kidneys, the hepatic and blood folate levels were investigated by feeding crude x-methyl folate(XMF) at a level of 5 g per kg diet. 9-Methyl folate is konwn as a major forate antagonist in XMF to produce deficiency signs in rat. Feeding of XMF decreased histidine oxidation and hepatic folate levels significantly, which showed the function of 9-methyl folate as an antifolate in rats. The hepatic uptake of labeled folate in XMF- fed rats was decreased significantly. These data led to conclude that 9-methyl folate inhibited folate uptake and retention by tissue, especially liver, which could explain the low liver folate levels and the decreased histidine oxidation. However, only very low level of 9-methyl folate was detected in liver. It suggested that 9-methyl folate may be metabolized very quickly in the liver after uptaken.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.877-880
• /
• 2011

A coaxial swirl/shear injector using GCH4/LOx as propellants was degisned and manufactured. Flow analysis by Fluent was performed to decide the number of orifice and the rear shapes of inlet orifice etc. Flow rate of the injector was measured according to differential pressure and uniformity of injector's spray pattern was confirmed by a patternator. The results showed that the difference of flow rate was around 10% and the spray angle of oxidizer was $66^{\circ}$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.658-661
• /
• 2011

A coaxial swirl/shear injector using GCH4/LOx as propellants was degisned and manufactured. Flow analysis by Fluent was performed to decide the number of orifice and the rear shapes of inlet orifice etc. Flow rate of the injector was measured according to differential pressure and uniformity of injector's spray pattern was confirmed by a patternator. The results showed that the difference of flow rate was around 10% and the spray angle of oxidizer was $66^{\circ}$.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.715-723
• /
• 1999

Magnesium has been used as wheel materials in the automotive industry for more than 20 years. The magnesium wheels, which are lighter by 25% than aluminum wheels, provide easy controllability providing excellent road holding by the reduction of weight. The purpose of this work is to develop cast AZ91D alloy wheel by sand cast and permanent mold cast. The fluxless melting with the protective gas $(SF_6+CO_2)$ was Performed to eliminate oxidation of melt and impurity. The transfer of molten magnesium to the mold was done by using gas-pressurized Pump system through the heated pipe. The mechanical properites of AZ91D alloy wheel were investigated as a function of heat treatment, ingot composition.