• 제목/요약/키워드: 산학협력단

검색결과 420건 처리시간 0.028초

5G+ 초연결 환경을 위한 암호기술 연구

  • 장찬국;김현기;윤승환;이옥연
    • 정보보호학회지
    • /
    • 제30권6호
    • /
    • pp.47-53
    • /
    • 2020
  • 4G/LTE로 일컫는 4세대 이동통신 이후 등장한 5세대 이동통신 기술은 초고속, 초연결, 초저지연 등을 기술적 요구사항으로 정의하다. 특히, 초연결을 위한 요구사항으로 1㎢단위 면적당 1백만개의 사용자 단말장치 또는 기기 등을 이동통신망에 연결토록 하는 것이고. 사용자 및 개체와 이동통신망 사이에서 식별을 포함하여 상호 인증 및 키 일치와 같은 암호기술을 요구하고 있다. 이때 사용자 및 개체 인증을 위한 많은 양의 난수가 소요되며, 이를 구현하기 위한 홈 네트워크 뿐만 아니라 단말 등에 적합한 난수기반의 암호장비 수요가 가시화 되고 있다. 본 논문에서는 5G 이동통신 환경에서 암호기술을 소개하고, 5G 이후 초연결을 위한 암호기술의 연구결과를 제시한다.

금속 박판 Al/Al 및 Al/Cu의 초음파 용착 접합성 평가 (Ultrasonic Deposit Junction Characteristic Evaluation of Metal Sheets Al/Al and Al/Cu)

  • 서정석;백시영
    • 대한금속재료학회지
    • /
    • 제49권8호
    • /
    • pp.642-648
    • /
    • 2011
  • This paper describes an experimental study on ultrasonic welding of similar and dissimilar metals. There are optimum welding conditions which are found for welding of Al/Al and Al/Cu. It evaluated weldability using tensile test, SEM observation and EDX-ray analysis. Both ultrasonic welding of Al/Al and Al/Cu have amplitude as the variable factor. Al/Cu welding was examined again with welding time as variable factor to find the best conditions. The more welding time or amplitude increase, the better weldability. The optimum conditions for ultrasonic welding of Al/Al were formed at pressure 0.25 MPa, welding time 0.25 sec, amplitude 90%. Pressure 0.25 MPa, welding time 0.4 sec, amplitude 80% are optimized for Al/Cu ultrasonic metal welding and solid-state diffusion generated by ultrasonic vibration and frictional heat is confirmed at the welded interface.

Helical Ribbon Impeller의 중심축과 스트럿이 혼합성능에 미치는 영향 (Effect of Helical Ribbon Impeller's Center Shaft & Lateral Supporting Struts on Mixing Performance)

  • 고승태
    • Korean Chemical Engineering Research
    • /
    • 제60권3호
    • /
    • pp.468-471
    • /
    • 2022
  • 헬리컬 리본 임펠러 교반조의 중심축과 헬리컬 리본을 지지하는 스트럿의 영향을 실험과 가시화를 통하여 검토한 결과, 액위 변화에 따른 불완전 혼합부의 발생 등 혼합성능에 크게 악영향을 미치는 것은 종 방향의 중심축이 아니라 횡 방향의 스트럿임을 밝혔다.

하천 서식처 기반 생태학적 가뭄의 예경보 기술 개발 (Development of ecological drought forecasting and warning technology using river habitat)

  • 박서연;박상혁;김영준;이주헌
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2023년도 학술발표회
    • /
    • pp.49-49
    • /
    • 2023
  • 지구온난화의 영향으로 가뭄의 발생 빈도가 전 세계 곳곳으로 증가하고 있는 추세이다. 가뭄이란 강수량 혹은 가용 수자원 등이 평균적인 수준에 비해 지속해서 적게 유지되는 현상으로 다양한 분야(기상, 농업, 사회, 경제 등)에 피해를 발생시킨다. 가뭄이 지속되면 인간 사회 뿐만 아니라 동·식물이 서식하고 있는 생태계에도 영향을 미치게 된다. 우리나라에서도 2000년대 이후 주기적으로 발생한 가뭄으로 인해 가뭄 현상을 모니터링하고 예측, 전망하기 위한 다양한 연구가 진행되고 있으나 아직까지 환경생태가뭄에 대한 연구는 미흡한 실정이다. 본 연구에서는 가뭄으로 인해 환경생태계에 미치는 영향 중 수생태계에 초점을 맞춰 진행하였으며, 수생태계에 서식하는 동·식물 중 어류만을 대상으로 하였다. 생태가뭄을 빠르고 쉽게 예측하기 위해 Ecological Nomograph를 개발하여 가뭄에 따른 수생태계에 미치는 영향을 분석하고자 하였다. 본 연구에서 나온 결과를 바탕으로 환경가뭄을 감시하고 대응하기 위한 분석 방법으로 활용할 수 있을 것으로 판단된다.

  • PDF

강원도 지역 극한 강우의 통계적 특성 분석 (Regional analysis of statistical characteristics for extreme rainfall in Kangwon Province)

  • 김성훈;김희철;허준행
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2023년도 학술발표회
    • /
    • pp.278-278
    • /
    • 2023
  • 강우는 수문 현상을 구성하는 가장 기본적인 요소로, 관측된 강우 자료의 정확한 분석 결과는 수자원 정책과 계획·관리에 합리적 판단 근거로 작용한다. 강원도는 지난 2002년 태풍 루사로 인하여 일 강수량 870.5mm의 폭우가 기록된 지역으로, 극한 강우로 인한 막대한 피해가 해마다 발생하고 있다. 특히, 강원도 지역은 태백산맥 중심의 산악지형과 동해의 영향을 직·간접적으로 받는 강우 사상의 특성이 집중호우, 폭설 등으로 나타난다. 본 연구에서는 강원도 지역 극한 강우의 통계적 특성을 파악하기 위하여 국가수자원관리종합정보시스템에서 제공하는 강우 자료를 수집하여 분석하였다. 또한, 최근 5년간 극한 강우의 변동 특성을 정량적으로 분석하고자 2022년까지의 자료를 구축하여 기존 『홍수량 산정 표준 지침』 작성 시 산정한 결과(2017년까지의 자료)와 비교·분석하였다. L-모멘트법 기반의 Generalized Extreme Value (GEV) 분포형을 이용하였고, 지역빈도해석을 수행하여 확률강우량을 산정하였다.

  • PDF

DNN을 활용한 콘크리트 건조수축 예측 모델의 활성화 함수 비교분석 (Comparison on of Activation Functions for Shrinkage Prediction Model using DNN)

  • 한준희;김수호;백성진;한수환;김종;한민철
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.121-122
    • /
    • 2022
  • In this study, compared and analyzed various Activation Functions to present a methodology for developing a natural intelligence-based prediction system. As a result of the analysis, ELU was the best with RMSE: 62.87, R2: 0.96, and the error rate was 4%. However, it is considered desirable to construct a prediction system by combining each algorithm model for optimization.

  • PDF

화재안전설비 작동 시나리오에 따른 화재위험분석에 관한 연구 (A Study on the Analysis of Fire Risk according to the Operation Scenario of Fire Safety Equipment)

  • 진승현;구인혁;권영진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.139-140
    • /
    • 2022
  • This study aims to present basic data for fire risk assessment. In the existing fire risk assessment, the operation of fire safety facilities is not considered. In addition, there is a lack of data on the fire growth rate to predict the spread of fire. Therefore, this study intends to build a fire scenario using fire statistics data. In addition, the fire growth rate is to be derived in consideration of the floor area of burnout and the cause of fire.

  • PDF

시공줄눈의 일체화를 위한 초지연제의 활용 (Application of Super Retarding Agent for Integration of Construction Joints)

  • 현승용;임군수;정영진;김종;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.15-16
    • /
    • 2022
  • This study is to confirm the integration performance of joints according to the method of applying the super retarding agent. When the super-delay system was applied, the integration performance was found to decrease somewhat on the 7th day of age. In the case of the 28th of age, it was found that the integration performance is improved. When a diluent is injected and a super delay agent is sprayed, shear bond strength is the highest.

  • PDF

물류창고의 배연설비 기준 개선을 위한 국내·외 배연설비의 설계 방법에 따른 연기하강시간 예측에 관한 연구 (A Study on the Prediction of Descending Smoke Time according to the Design Method of Domestic and Foreign Smoke Facilities for the Improvement of Smoke Facilities Standards in Logistics Warehouse)

  • 허예림;김윤성;진승현;구인혁;권영진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.141-142
    • /
    • 2022
  • Recently, fires in logistics warehouses in Korea are continuously increasing. In addition, the need for fire safety in logistics warehouses is emerging. So, it is believed that it is necessary to establish standards for vent facilities under effective smoke control for the evacuation safety of residents in logistics warehouses. Therefore, this paper compares the standards related to combustion facilities in Korea, the United States, and Japan, and applies the design method to logistics warehouses of domestic materials to predict smoke drop time and use it as a basic data for improving domestic smoke facilities standards.

  • PDF

22.9kV, 50MVA급 초전도 전력케이블의 표준화 추진 방안 (The propulsive plan on the standardization in 22.9kV, 50MVA HTS power cable)

  • 최석진;이상진;심기덕;조전욱;이수길
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제10권1호
    • /
    • pp.48-51
    • /
    • 2008
  • The standardization on superconducting application techniques has been focused only in testing method or material itself, but, recently, it is actively proceeded by superconducting technical committee(TC) of international electro technical commission(IEC). In this paper, the standardization organization and its necessary process is introduced and the standardization technique for 22.9kV, 50MVA HTS power cable is prescribed. Throughout this research, it is possible to take priorities on the standardization technique in HTS power cable application. And moreover it can also contributes to the commercialization of HTS power cable.