• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.53-64
• /
• 1994

After establishment of methodology for the separation and quantitation of optical isomer existed in food or biomaterial, the relationship between isomer and nutrient or biological sample was investigated. The optical isomers of standard amino acids and free amino acids were quantitized and the protein was assayed from the Korean bean, pasted bean, soy sauce, gochujang, powderd milk and cataract followed by hydrolysis and dervatization with TFA-IPA for GLC analysis with chirasil val column. Amino acids showing the racemization were alanine, aspartic acid, glutamic acid and phenyl alanine. The most convenient amino acid deducing age and biological activity was aspartic acid. Glutamic acid and phenyl alanine have shown poor resolution with less racemization. The ratio of d-form amino acids was 3~6% for home made pasted bean, about 3% for commerical pasted bean, 2~4% for soy sauce, about 1% for bean, 1~2% for cataract, 1.0~1.5% for powdered milk. The racemization during fermentation process was significant.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.12
• /
• pp.1734-1742
• /
• 2011

Conjugated linolenic acid (CLnA) and conjugated linoleic acid (CLA) are positional geometric isomers with three and two double bonds, respectively. In this study, perilla seed oil containing 60% ${\alpha}$-linolenic acid (C18:3) and 30% linoleic acid (C18:2) was used as a reaction substrate. After the perilla seed oil was hydrolyzed, conjugated fatty acids were synthesized using different reaction parameters, such as reaction time and concentration of sodium hydroxide. As a result, CLnA, CLA, and other newly synthesized conjugated isomers were present at levels of 14.5%, 14%, and 42.2%, respectively, when the reaction was performed with 20% NaOH, at $180^{\circ}C$, and for 1 hr. The results of GC-MS and fourier transform infrared spectroscopy (FT-IR) showed that CLnA isomer of cis-9, trans-11, and trans-13 octadecatrienoate, CLA isomer of cis-9, trans-11, and trans-10, cis-12 octadecadienoate, and other conjugated isomers were produced. Using urea, ${\alpha}$-linolenic acid could be concentrated from perilla seed oil hydrolysate. After concentration by urea, the concentration of ${\alpha}$-linolenic acid reached about 70%. After alkaline-isomerization was performed on the urea fraction containing 70% ${\alpha}$-linolenic acid, the content of CLnA increased up to 16.6%.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.79-89
• /
• 1988

This experiment was carried out to investigate the difference of compositions between petroleum ether extract and its tall oil in Pinus rigida Mill. xylem and to obtain the basic data on effective extraction and its utilization of by-product, resin and fatty acid, when pulp making. After both petroleum ether extract from wood meal and its tall oil in pitch pine were separated to the resin and fatty acid by using DEAE-Sephadex and aluminum oxide column, these were analyzed with gas chromatograph. The results obtained were as follows: 1. Fatty acids contained as ester form in living trees were varied by peroxide of organic solvent in petroleum ehter extraction and cooking chemicals in cooking. 2. Pimaric-type acid was eluted earlier than abietic-type acid in resin acids and the fewer the carbons, the earlier the elution in fatty acids. 3. The retention time of SE-30 column was even smaller than that of OV-101 column but the relative retention time obtained by using methyl pimarate and methyl stearate as internal standard was nearly identical. 4. Both petroleum ether extract and tall oil mainly consisted of resin acids, expecially abietic-type acid. 5. Tall oil had more fatty acid but less resin acid than petroleum ether extract. Also, the content of unidentified materials was increased owing to the isomerization and the shift of double bond position in unsaturated fatty acids by high temperature and cooking chemicals when cooking.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.1
• /
• pp.43-48
• /
• 2002

We carried out this subject to observe photoisomerization using 1,2-dioleoyl-sn- glycero-3-phosphocholine(DOPC) mixed with fatty acid containing azobenzene group which has reversible to cis-trans by light irradiation. Spreading solutions for the LB films were prepared in chloroform($5.0{\times}10^{-5}$mol/L).We investigated the photoisomerization and property of the organic ultra thin film of fatty acid containing azobenzene was prepared on the hydrophilic ITO(idium tin oxide) glass plate by LB method. As a result, the absorption spectra of 8A5H and DOPC of mixture LB films was induced to photoisomerization by alternating irradiation of ultraviolet and visible light, because the condensation of pure azobenzene monolayers was loosened by the introduction of phospholipid into the monolayers, and the molecular high aggregation in pure azobenzene monolayers is also weakened by the introduction of phospholipid. We found that it was reversibly induced to cis-trans photoisomerization in several solvents and mixture LB films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.874-877
• /
• 2004

We carried out this subject to observe electrochemical properties of 1,2-dioleoyl-sn- glycero-3-phosphocholine(DOPC) mixed with fatty acid containing azobenzene group by using cyclic voltammetry with a three-electrode system, An Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode in $NaClO_4$ solution. We investigated the photoisomerization and electrochemical property of the organic ultra thin film of fatty acid containing azobenzene was prepared on the hydrophilic ITO(idium tin oxide) glass plate by LB method. As a result, the absorption spectra of BASH and DOPC of mixture LB films was induced to photoisomerization by alternating irradiation of ultraviolet and visible light. A measuring range was reduced from initial potential to -1350mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate were 50, 100, 150 and 200 mV/s. As a results, LB films of BASH-DMPC appeared reversible process caused by the reduction-oxidation current from the cyclic voltammogram.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.264.2-264.2
• /
• 2014

비휘발성 메모리는 전원이 공급되지 않아도 저장된 정보를 계속 유지하는 메모리로써 현재 다양한 차세대 전자소자의 집적화 구현을 위해 저전압 동작 및 저장능력의 향상 등에 대한 연구가 활발히 진행되고 있다. 이때 삽입되는 전하저장층의 경우 기존 널리 이용되는 질화막(SiNx) 외에 최근에는 산화 알루미늄(Al2O3) 등의 고유전상수 물질 뿐만 아니라, 밴드갭 조절을 통해 전하저장능력을 향상시키는 산화막(SiOx)에 대한 연구도 진행 중이다. 이번 연구에서는 전하저장능력을 향상시키기 위해 전하저장층으로 산화막을 이용할 뿐만 아니라, 기존의 평편한 구조가 아닌 표면 조절을 통해 전하저장능력을 보다 향상시키고자 한다. 또한 이번 연구에서는 비휘발성 메모리 소자의 응용을 위해 우선적으로 금속-절연체-반도체 형태의 MOOxOyS 구조를 이용하였다. 이 때 실리콘 표면적을 변화시키기 위해 이용된 실리콘 웨이퍼는 1) 평편한 실리콘, 2) 수산화암모늄, 이소프로필 알코올 및 탈이온수를 혼합한 용액에 식각시킨 삼각형 구조, 3) 불산, 질산 및 아세트산을 혼합한 용액에 식각시킨 라운드 구조이다. 정전용량-전압 측정을 통해 얻어진 메모리 윈도우는 1) 평편한 실리콘의 경우 약 5.1 V, 2) 삼각형 구조의 경우 약 5.3 V, 3) 라운드 구조의 경우 약 5.9 V를 얻었다. 이 때, 라운드 구조의 경우 가장 넓은 표면적으로 인해 상대적으로 전하트랩이 가장 많이 되어 메모리 윈도우가 가장 커지는 특성을 볼 수 있었다.

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.265-269
• /
• 2004

Plasma nitrocarburising and post oxidation were performed on SCM435 steel by a pulsed plasma ion nitriding system. Plasma oxidation resulted in the formation of a very thin ferritic oxide layer 1-2 $\mu\textrm{m}$ thick on top of a 15～25 $\mu\textrm{m}$ $\varepsilon$-F $e_{2-3}$(N,C) nitrocarburized compound layer. The growth rate of oxide layer increased with the treatment temperature and time. However, the oxide layer was easily spalled from the compound layer either for both oxidation temperatures above $450^{\circ}C$, or for oxidation time more than 2 hrs at oxidation temperature $400^{\circ}C$. It was confirmed that the relative amount of $Fe_2$$O_3$, compared with $e_3$$O_4$, increased rapidly with the oxidation temperature. The amounts of ${\gamma}$'-$Fe_4$(N,C) and $\theta$-$Fe_3$C, generated from dissociation from $\varepsilon$-$Fe_{2-3}$ /(N,C) phase during $O_2$ plasma sputtering, were also increased with the oxidation temperature.e.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.2
• /
• pp.90-95
• /
• 2006

Nitriding or carburizing of carbon steels results in good mechanical properties such as high surface hardness and wear resistance but it has no affection on the corrosion resistance. Corrosion properties of nitriding and carburizing steels could be deteriorated. So, recently, there have been great demand for oxi-nitriding to enhance both mechanical properties and corrosion resistance. In this study, the corrosion resistance of carbon steel, S35C, and free cutting steel, SUM222, are prepared by vacuum nitriding and vacuum post-oxidation were compared with those treated by nitriding. After vacuum post-oxidation, $5{\mu}m$ oxide layer was formed on the nitride layer with $20{\sim}30{\mu}m$ depth. Potentio-dynamic polarization curve in corrosion test showed that the corrosion potential after post oxidation was increased from 200 mV to 800 mV in S35C and from 600 mV to 1200 mV in SUM222. SEM analyses showed that pores was increased and surface roughness became rougher with post oxidation. However, the formation of $Fe_3O_4$ resulted in the enhanced corrosion resistance of steels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.943-946
• /
• 2004

We have investigated to observe the photoisomerization using the mixture solutions in chloroform and LB monolayers mixed with DPPA and BASH containing azobenzene group which has reversible to cis-trans by light irradiation.. Spreading solutions for the LB films were Prepared in chloroform($5.0{\times}10^{-5}mol/L$). We investigated the photoisomerization and property of the organic ultra thin film of fatty acid containing azobenzene was Prepared on the glass plate by LB method. As a result, the absorption spectra of 8A5H and DPPA mixture of LB films was induced to photoisomerization by alternating irradiation of ultraviolet and visible light, because the condensation of pure azobenzene monolayers was loosened by the introduction of phospholipid into the monolayers, and the molecular high aggregation in pure azobenzene monolayers is also weakened by the introduction of phospholipid. We found that it was reversibly induced to cis-trans photoisomerization in a various mixture molar ratio.

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.309-314
• /
• 2023

This study aimed to address the limitations of traditional plasma nitriding methods by implementing a short-term plasma oxy-nitriding treatment on the surface of AISI 420 martensitic stainless steel. This treatment involved the sequential formation of nitride and oxide layers, to enhance surface hardness and corrosion resistance, respectively. The process resulted in the formation of a 20 ㎛-thick nitride layer and a 3 ㎛-thick oxide layer on the steel surface. Initially, the hardness increased by 2.2 times after nitriding, followed by a subsequent decrease of approximately 31 % after oxidation. While the nitriding process reduced corrosion resistance, the subsequent oxidation process led to the formation of a passive oxide film, effectively resolving this issue. The pitting corrosion of the oxide passive film started at 82.6 mVssc, providing better corrosion resistance characteristics than the nitride layer. Consequently, the trade-off between surface hardness and corrosion resistance in plasma oxy-nitrided AISI 420 martensitic stainless steel is anticipated to be recognized as an innovative and comprehensive surface treatment process for biomedical components.