• 한국의류산업학회지
• /
• 제9권2호
• /
• pp.243-248
• /
• 2007

This study is about the fabric attached to the relics excavated from the Shimchun-ri tomb of the 4th century and the Moonsan-ri tombs of the 5th century. We studied 5 pieces of fabric from the Shimchun-ri tomb: one piece was silk and the other four pieces were hemp. We were able to observe 8 pieces from the four tombs in Moonsan-ri, All of them except one ramie were silk. The two kinds of bast fiber found in the tombs of Shimchun-ri and Moonsan-ri were hemp and ramie, and they were found to be plain woven with S-twist thread which thickness is uneven. The density was more fine compared to the hemps found in the Kaya or Shinra tombs of the similar era. All of the silk textiles found in the Shimchun-ri and Moonsan-ri tombs used non-twisted thread, and were plain woven. Also, we found degummed and raw silk from the tombs. The average density of the silk textiles from these tombs are similar to other areas of the same time, and studies show that they used non-twisted thread in plain woven silk found in other tombs. Therefore, we can conclude that they usually used non-twisted thread when producing silk textiles.

• 한국의류산업학회지
• /
• 제19권4호
• /
• pp.493-503
• /
• 2017

This study investigated water vapor permeability of the 73 breathable fabrics for sports-wear according to the materials, finishing methods and fabric structural parameters. The water vapor permeability by KS K 0594 method of PET breathable fabric was superior than that of nylon one, in addition, water vapor permeability of coated or laminated breathable fabrics were higher than those of hot melt or dot laminated fabrics. The water vapor permeability of breathable fabric was dependent on the thickness, weight and density, which was consistent with measuring method. However, water vapor permeability according to materials and finishing method showed different results according to measuring method. The correlation coefficient of WVP of PET breathable fabrics between ISO and KS K measuring methods was -0.83 and the correlation coefficient of WVP of coated breathable fabrics was -0.72 and -0.71 for KS K and ASTM and -0.72 for KS K and ISO in hot melt laminated breathable fabrics. According to regression analysis, WVP of PET breathable fabric by both KSK and ISO measuring methods was highly dependent upon on the density and weight. In addition, WVP of hot melt laminated breathable fabric was highly dependent upon thickness, weight and density. Therefore, relevant measuring method for WVP of breathable fabrics has to be adopted to measure precise breathability.

• 한국의류산업학회지
• /
• 제22권1호
• /
• pp.112-118
• /
• 2020

This paper examined the water repellency, water proofing and water vapor permeability of twelve types of woven fabrics for sports wear clothing. Their physical properties were compared and discussed with the fabric structural parameters and surface finishing effect. A water repellent property of 100% was obtained in the coated or laminated water repellent finished fabrics; in addition, cotton/nylon breathable composite fabrics treated with a laminated finishing and with low fabric density showed a 90% water repellency. Water proofing fabric above 6,000 mm H₂O hydraulic pressure was achieved by coated or laminated finishing; however, high density fabric or medium-level coated fabrics exhibited 100% water repellent and low water proofing characteristics. Superior water vapor permeability characteristics with good water repellency and proofing properties were achieved at the 2.5 layered low density and with 0.7 - 0.9 cover factor nylon fabrics treated with hydrophilic laminated finishing. The regression analysis for examining the effects of fabric structural parameters and surface finishing such as coating and laminating to the water vapor permeability exhibited a high determination coefficient of fabric structural parameters of 63.5%; in addition,, main factors among fabric structural parameters appeared to be cover factor and fabric thickness per weight. Coating and Laminating factors exhibited determination coefficient of water vapor permeability parameters of 36.5%.

• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.515-522
• /
• 2020

This study examined the effect of the blend ratio of wool and polyester fibers, yarn and fabric structural parameters to the appearance property and the formability of worsted fabrics. The mechanical properties of twenty types of manufactured worsted and PET/wool blend fabrics were measured using KES-FB and FAST systems. Garment formability increases with the thickness and cover factor as well as increases with wool content. The correlation between KES-FB and FAST system showed a relatively high correlation with an extensibility of 0.98, bending and shear rigidity 0.71; both were higher than polyester synthetic fiber. The correlation coefficient of garment formability between KES-FB and FAST systems was 0.93 and the correlation coefficient between formability and fabric extensibility was 0.8. These results were higher than those of bending and shear rigidity. This revealed that garment formability was influenced by wool content, cover factor and fabric thickness; however, wool content and fabric thickness were the most important factors for the seam pucker. The garment formability of the worsted fabrics can be predicted by fabric mechanical properties measured from KES-FB and FAST systems.

• 한국의류학회지
• /
• 제45권2호
• /
• pp.335-345
• /
• 2021

The purpose of this study was to examine the effect of fabric movement on wrinkle recovery in a clothing care system and to propose an algorithm to improve wrinkle removal performance by adjusting fabric movements. With an increase in the reciprocating speed of the movement system, the number and amplitude of curves on the fabric also increased. This allowed the fabric to be applied to a larger tension, resulting in better wrinkle removal performance at higher speeds. However, even at high reciprocating speeds, wrinkles could not be removed effectively because of nodes at a few specific locations. Based on the results of fabric movement and wrinkle recovery, a complex movement algorithm was proposed with a mixture of various reciprocation speeds. It showed a 41%p (24%→65%) improvement of wrinkle recovery when compared with the conventional algorithm that showed simple fabric movement at 180 rpm. This was because the positions of nodes and antinodes changed continuously and the force by the reciprocating motion could be applied evenly to the fabric.

• 한국의류산업학회지
• /
• 제21권1호
• /
• pp.104-111
• /
• 2019

This study was developed using the DTP (digital textile printing) jacquard fabrics with a three-dimensional pattern for bag and evaluated the preference and emotional structure. The following conclusions were obtained. Three-dimensional patterns of 12 species using the illustrator program, including six kinds of designs based on the text and six kinds of character types based on the geometry of the basic design was developed. As a result of evaluating the preference of the three-dimensional pattern jacquard fabric, the most preferred fabric was a three-dimensional patterned jacquard fabric with a motif of the Korean consonant "ㅅ". The results of analyzing the emotional dimension of the three-dimensional pattern jacquard fabric, eight factors including simple image, feminine image, exotic image, graphic image, sporty image, masculine image, dynamic image and stereoscopic image were derived. Between emotional factors and preferences correlation analysis showed the stronger the simple image, the feminine image, and the sporty image, the more preferable. It suggested the possibility of a morphological and new fabric for bag, textile design motifs by using Hangul consonants attempt to limit the flatness of the existing geometric form patterns that can be applied to three-dimensional bag whether swirly patterns overcome.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.376-376
• /
• 2002

편평분할사는 복합방사법에 의한 편평 단면 형태의 분할형 초극세섬유로서, 기존 오렌지 형태인 Nylon/PET 극세사의 품종 다양화된 형태이다 분할은 Nylon과 PET의 비상용성인 특징을 이용, 물리적인 가공과 화학적인 가공에 의해 이루어지며 기존오렌지 형태의 PET/Nylon극세사에 비해 분할성이 우수하다고 보고되고 있다. 편평분할사의 용도는 Micro powder조의 Suede직물 등의 여성용 의류, 기능성 스포츠웨어, 2차 오염방지성이 우수하여 반도체 등의 정밀산업의 닦음천(Wiping Cloth)등의 크리너(Cleaner)용으로도 사용되어 질 수 있다. (중략)

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1997년도 한국감성과학회 연차학술대회논문집
• /
• pp.16-21
• /
• 1997

인간은 접촉을 통해 여러 가지 정보를 받아들이고 있으며 피부와 물체표면과의 접촉에 의한 느낌은 인간의 감성을 유발하는 중요한 요소이다. 이와 같은 질감에 대한 느낌을 측정하여 객관적인 값으로 표현된다면 의류, 종이, 자동차등 대부분의 산업분야에서 제풀을 디자인하는데 응용이 가능할 것이다. 인간이 촉감을 느낄 때의 Mechanism과 촉감에 가장 큰 관계를 가지는 마찰력에 대해 조사하여, 이를 응용한 표면 특성 측정장치를 설계 제작하였다. 또한 인간이 제품의 표면질감을 느낄 때의 주관적인 표현을 직물을 대상으로 하여 설문조사를 통해 대표형용사로 표현하도록 하였다. 이러한 주관적인 질감 표현과 같은 직물을 표면 특성 측정장치를 이용하여 얻어낸 측정값과 상관관계를 조사하여 질감의 객관적인 표현을 연구하는데 이용하였다.

• KDI Journal of Economic Policy
• /
• 제11권1호
• /
• pp.3-30
• /
• 1989

본(本) 연구(硏究)에서는 원화(貨)의 평가절상(平價切上)이 산업별(産業別) 생산(生産), 가격(價格), 고용(雇傭), 무역(貿易) 등에 미치는 영향을 한국경제(韓國經濟)의 일반균형모형(一般均衡模型)을 통하여 분석하였다. 분석결과에 의하면 평가절상(平價切上)의 효과(效果)는 산업(産業)의 수요(需要), 공결탄성치(供結彈性値), 수출비율(輸出比率), 수입품과의 대체성(代替性), 부가가치비율(附加價値比率) 등 산업(産業)이 갖는 특성에 따라서 매우 상이(相異)하게 나타남을 알 수 있었다. 혁제품, 고무제품, 섬유 직물, 조선, 의복 등의 산업에서 생산감소효과(生産減少效果)가 큰 것으로 나타나고 있으며 석유제품, 철1차제품, 비철금속1차제품, 화학제품 등의 산업에서 가격하락효과(價格下落效果)가 큰 것으로 밝혀졌다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2007년도 춘계학술대회
• /
• pp.469-480
• /
• 2007

최근 남북 관계는 경제협력, 사회문화교류, 체육교류 등 양적 질적으로 많은 변화가 일어나고 있으며, 향후에도 지속적인 변화가 전망된다. 따라서 우리는 북한의 현실을 객관적인 자료에 의하여 남한과 비교하여 분석할 필요가 있다. 우선적으로 남북한 주요지표 (인구, 경제성장률, 주요 제품 생산량, 사회간접자본 등)를 비교하여 본다. 다음으로 좀 더 구체적으로 석탄, 철광석, 비료, 철강, 직물 등의 광공업의 현황과 산업 발전에 주요 장애 요소가 무엇인지 알아보기로 한다. 그리고 현재 북한에서 채택하고 있는 산업중흥 프로그램이 무엇인지도 조사하기로 한다. 다음으로 북한에서 6자 회담에서도 강력히 요구하고 있는 에너지의 현황과 발전량에 대하여 상세히 알아보며, 북한 산업을 일으키기 위한 인프라의 문제점에 대하여 기술하기로 한다. 다음으로 북한의 교육체계에 대하여 조사하여 보고, 교육체계의 발전방향에 대하여도 검토하기로 한다. 마지막으로 궁극적으로 남북한 통일에 대비한 우리의 준비가 나아가야할 방향에 대하여 기술하기로 한다.