• Current Industrial and Technological Trends in Aerospace
• /
• v.9 no.1
• /
• pp.77-89
• /
• 2011

The vibration and noise reduction issue is very important in helicopter since the thrust and flight control force of helicopter are generated by rotating drive system. In past, there was a passive method to reduce vibration and noise to focus on specified frequency. Now, there are various active method to reduce vibration and noise due to technology development. This paper describes the worldwide technology trend of vibration and noise active control in helicopter. At introduction, generalmethod of vibration and noise reduction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1233-1238
• /
• 2010

The lighting industry has become the bigger and more systemized using the semiconductor LED with each control R(Red), G(Green), B(Blue). The communication standard DMX512(ANSI E1.11) protocol of it basically needs the address which can be distinguished between the lighting terminals. The conventional method has to give the address of the lighting any methods like dip switch, EEROM and PROM. Then the lighting terminal can receive RGB data from DMX512 communication. According to electrical characteristics DMX512 protocol has to the splitter every 32 lighting terminals. If 512 lightings is all connected, maximum 16 splitters are needed. This paper is solved above weakness in DMX512 protocol using serial connection all lighting terminals. Also I developed the intelligent lighting terminal with auto-addressing. This was solved the inconvenience of the address assignment and the usage of the splitter. The developed products is applied and selled the semiconductor lighting terminals using ON-OFF control, dimming control, sequential control and rainbow control.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.238-243
• /
• 2011

The ambient temperature of the experimental conditions changes by varying the speed of the compressor and the electronic expansion valve opening. The effects of changing valve opening to the entire system has been investigated. The results show that the ambient temperatures of $35^{\circ}C$ and $30^{\circ}C$ controlled at 30Hz must be avoided. The capacity control range of the control compressor with changing speed is about 43~100% at $35^{\circ}C$, 43~100% at $25^{\circ}C$ and 48~100% at $10^{\circ}C$, respectively. The results show the capacity control range decreases with decreasing ambient temperature.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.113-120
• /
• 2011

The information of the IT convergence has extended through the whole business ares with supplying intelligence terminal such as smart phone and the technology of sensors and wireless networks. And also, the existed industry became to high technology and extended various parts. The industry of the elevator became the center of the life offering the diversification of the user environment access and high building control. In this paper, we suggest the elevator control system integrated wire and wireless based on Information technology. We suggest the service model of user friendly connected by internet. For this, we make the relation model of the elevator system and IT environments and then design the service model for wire service and wireless service using smart phone. It can make to supply efficient information with wire and wireless environments and also make improvement in accessability for the disabled peoples.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.98-102
• /
• 2006

Recent development of Information Technology, the ubiquitous computing environment is on the rise. At the same time, RFID technology and its related applications are actively investigated. In this paper, a portable merchandise information providing system using cheap wireless transmission module is developed in order to overcome the mobility limitation of the wired RFID system. The TRF6901 chipset of 900MHz band from TI is used for the wireless transmission module and the MPS430F149 is used for the MPU. It is expected that the developed system can be applied to numerous innovative wireless applications such as library circulation desk for lending service and automated door system for entrance control.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.143-145
• /
• 2003

전기방사에 의해 제조되는 나노 파이버웹은 섬유가 매우 가늘고, 기공이 미세하며 비표면적이 매우 커서 필터 및 전극재료에 적합한 산업용 소재이다. 나노 웹의 구조는 방사 용액의 농도, 방사 온도, 압력, 전압등 여러 변수들에 의해 영향을 받으며, 이 변수들의 구조에 미치는 영향들이 이론적, 실험적으로 많이 연구, 보고되어 있다 [1]. 그러나, 공정의 분석 및 제어에 대한 연구는 매우 드물며, 특히 대량 생산하에서의 품질 관리 시스템에 대한 연구는 전무한 실정이다. (중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.241-244
• /
• 1998

최근에 이르러 자동차 화재는 일반화재 보다 높은 연평균 16.5%의 증가율을 나타내며, 전체 화재 건수의 17%로 주택 및 아파트 다음으로 화재 발생 건수가 많다. 자동차 화재는 엔진과열, 전기장치의 불량, 전자 제어화에 따른 각종 감지기의 연결상태 및 기능 불량, 교통사고로 인한 엔진의 파괴 및 연료 누출등이 원인이 되고 있으며, 주로 엔진룸에서 화재가 발생하여 차량 내부로 전파되는 특징이 있다. 따라서 화재 발생 초기에 화재를 감지하여 운전자에게 경보를 발하고, 화재를 진압할 수 있는 자동차 화재 감지시스템의 개발이 중요해 지고 있다. (중략)

• Proceedings of the SAREK Conference
• /
• 2004.11a
• /
• pp.7-7
• /
• 2004

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.47-55
• /
• 2019

The robot is the creation of new markets and various cooperation according to the manufacturing paradigm shift. Cooperative management easy for existing industrial robots, robots work on productivity, manpower to replace the robot in every industry cooperation for the purpose of and demand increases.to exist But the industrial robot at the scene of the cooperation working due to accidents are frequent, threatening the safety of the operator. Of industrial site is configured with a robot in an environment ensuring the safety of the operator to and confidence to communicate that can do the possibility of action.Robot guard system of the need for development cooperation. The robot's cooperation through the sensors and computer vision task within a radius of the double to prevent accidents and accidents should reduce the risk. International protocol for a variety of industrial production equipment and communications opc ua system based on ultrasonic sensors and cnn to (Convolution Neural Network) for video analytics. We suggest the cooperation with the robot guard system. Robots in a proposed system is unsafe situation of workers evaluating the possibility of control.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.231-237
• /
• 2020

In this paper, we implemented a home IoT system based on MQTT protocol. In this system, data are collected from sensors in real time and transmitted to the server system. Based on collected data, home devices could be controlled automatically or manually. By using the MQTT protocol, we were able to see the data values of sensors collected in real time according to the topic setting. We implemented a system that automatically sets up home devices based on topic data, and it worked. The system is expected to be useful in applications that require monitoring and tracking of data in real time.