• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.115-123
• /
• 2008

In the present study, a three dimensional hydrodynamic characteristics around the fully submerged dual breakwaters with a sand beach has been investigated numerically using a 3-D numerical scheme, which can determine the eddy viscosity with LES turbulence model and is able to consider wave-structure-seabed interaction in 3-dimensional wave field (LES-WASS-3D), recently developed by Hur and Lee (2007). Based on the numerical experiments, strong vortices can be generated fore and aft edges of the structures, and propagate lee sides. Thus relatively large circulation flows are occurred around submerged breakwaters. The 3-D flow hydrodynamic characteristics have been examined by mean flows and mean vortices for various x-y, x-z sections and y-z layers. Wave height distribution and wave set-up around and over submerged breakwaters, and breaking point migration toward shore side is discussed in detail.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.79-93
• /
• 2008

Water quality simulations on the Saemangeum inner reservoir have been carried out using EFDC model to understand water quality variations caused by abrupt physical changes due to closing of tidal barrier. According to hydrodynamic simulation, model reproduces not only outer regional dynamics but also inner superelevation very well. Calibration and verification of water quality models accomplished using observed data taken before closing. Also sensitivity tests regarding riverine discharges and tidal flats were done. Due to enlarging of always wet zone caused by super elevation on inner tidal flats, predicted DO decreases at that region as a result of SOD. Moreover shrink of mixing zone after closing of dike causes deteriorating of water quality showing DO as 2 mg/L during summer at Mangyeong and Dongjin estuaries, however it does not spread to middle part of the reservoir. Vertical stratification occurs after closing and shows vertical differences in DO concentration at least 6 mg/L to 7 mg/L in summer season. Most part of the reservoir is getting stratified and it leads to an oxigen deficit zone near bottom.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.99-105
• /
• 2023

In the 4th industrial revolution, the field of criminal justice is paying attention to Legaltech using artificial intelligence to provide efficient legal services. This paper attempted to create a crime prediction model that can apply Recurrent Neural Network(RNN) to increase the potential for using legal technology in the domestic criminal justice field. To this end, the crime process was divided into pre, during, and post stages based on the criminal facts described in the judgment, utilizing crime script analysis techniques. In addition, at each time point, the method and evidence of crime were classified into objects, actions, and environments based on the sentence composition elements and the 8 principles of investigation. The case summary analysis framework derived from this study can contribute to establishing situational crime prevention strategies because it is easy to identify typical patterns of specific crime methods. Furthermore, the results of this study can be used as a useful reference for research on generating crime situation prediction data based on RNN models in future follow-up studies.

• Journal of fish pathology
• /
• v.37 no.1
• /
• pp.97-110
• /
• 2024

The Serranidae is high-quality fish species with good meat quality and is traded at high price, and is attracting attention in South Korea as a cultured species that creates high added value. However, the high-density fish farming for mass production increases the risk of mass mortality due to infectious diseases, leading to enormous economic losses. Therefore, in order to safely prevent and protect farmed fish from serious infectious diseases, it is necessary to conduct disease monitoring on a regular basis. In this study, Hyporthodus septemfasciatus, Epinephelus moara, and the hybrid longtooth grouper (E. moara ♀×E. lanceolatus ♂) were collected once a month from fish farm of Garorim and Aquabiotech Co., Ltd for a total of six months, from July to December 2023. We investigated infections of five species of bacterial diseases, including Flavobacterium columnare, six species of viral diseases, including LCDV (lymphocystis disease virus), and parasitic pathogens in grouper farms. As the result, Vibrio vulnificus and V. harveyi were detected in H. septemfasciatus in August, in the case of viral diseases, NNV was detected in H. septemfasciatus from July to August using RT-PCR or PCR. Finally, In the case of parasitic diseases, Tricodina sp. was detected in E. moara and the hybrid longtooth grouper from August to December.

• Journal of Practical Engineering Education
• /
• v.16 no.3_spc
• /
• pp.379-389
• /
• 2024

This study attempted to present a strategy for operating a university Semiconductor Boot Camp in order to resolve the manpower shortage in semiconductor companies and establish a virtuous cycle of talent development and industrial growth. For this purpose, we conducted a survey and interview with 18 experts in the semi-apprenticeship field and analyzed them. As a result of the analysis, there was a high consensus on the need for boot camps to 'meet the needs of various companies' and 'cultivate talent capable of being deployed in the field', and opinions on the program's goal were 'to provide education to those expected to graduate and graduates majoring in science and engineering through education. The level of agreement was highest for 'strengthening practical capabilities' and 'cultivating professional talent with expert knowledge of each unit process'. The Semiconductor Boot Camp curriculum was found to be most suitable for conducting field practical projects after training in field experience, theory, and practice. This research is expected to be used as a basis for devising a strategy for effectively running the semiconductor field in university education.

• Advanced Industrial SCIence
• /
• v.3 no.1
• /
• pp.17-22
• /
• 2024

History, which began with the emergence of mankind, has a means of recording. Today, we can check the past through data. Generated data may only be generated and stored at a certain moment, but it is not only continuously generated over a certain time interval from the past to the present, but also occurs in the future, so making predictions using it is an important task. In order to find out trends in the use of time series data among numerous data, this paper analyzes the concept of time series data, analyzes Recurrent Neural Network and Long-Short Term Memory, which are mainly used for time series data analysis in the machine learning field, and analyzes the use of these models. Through case studies, it was confirmed that it is being used in various fields such as medical diagnosis, stock price analysis, and climate prediction, and is showing high predictive results. Based on this, we will explore ways to utilize it in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.559-564
• /
• 2024

Since the era of industrial revolution, the waste volume has continued to grow; waste management has thus become one of the major global environmental challenges facing humanities today. Waste treatment and management issues trigger NIMBY movements, and disputes among states, governments, and social actors over the issues have been accelrating. At the level of states and sub-states, various measures including institutions, laws, regulations, market-oriented methods, consensus and collaborative governance have been introduced to address various problems associated with waste. More recently, science and technology has been applied to the waste treatment and management under the notion of circular economy. However, societal support for addressing waste problems still remains inadequate, calling for new approaches and alternative pathways. In this context, this study examines two cases of urban incineration plants designed by Hudertwasser, Austria-born artist and architect: Spittelau, Austria, and Osaka, Japan. Through these case studies, I demonstrate how creative and innovative culture-technology convergence can shed new light on challenging environmental issues such as an urban waste problem.

• International Commerce and Information Review
• /
• v.18 no.4
• /
• pp.263-281
• /
• 2016

The Importance of SEP (Standard Essential Patents) Procurement Operation is on the side of Governmental and Public both to accelerate the national trade negotiation competitiveness. To operate cooperative system of SEP creation and management, Government should monitor the effect and performance periodically to public sectors. and To achieve the support objectives, it should establish the virtuous circle infrastructure between R&D and economic performance on SEP. This can make the SEP enhancement to pursue the international competitiveness on Intellectual Property Rights. Especially the specific support approach to each phase of the SEP declaration matrix is essential to consolidate the possibility of SEP creation and acquisition. In this study, the concepts of SEP to accelerate the national trade negotiation competitiveness and the prior research were verified through the investigation of market trend and current state of affair analysis. Through the analysis of international and domestic situation of SEP procurement and management, We have found the results as follows. First of all, the leading conglomerates and the Government should focus on the secondary and tertiary industries to create and acquire SEPs to accomplish the effectiveness of selection and concentration. In second, the SMEs and Univ. Labs should focus on the quaternary sector of the economy to retain the competitiveness of speed and challenge on SEP related. From this study, the appropriateness of the tailored-support management model should be institutionalized, and the results implied an research in order to examine the suitability among the current SEP to enhance the competitiveness of national trade research issues.

• Archives of design research
• /
• v.16 no.3
• /
• pp.309-318
• /
• 2003

A work of Art is not supposed to be isolated from the world, but it should be influenced by its cultural background and situations of the times. Therefore, Art itself reflects its era. In other words, it is created being based on the thought of its artist and simultaneously interacting with external conditions or circumstances of the era, so it would also affect the cultural code of its society. This is why modern art made by the individual living in this complicated and diversified society is quite avant-garde. Various demands from its society and diversified senses have been influencing diversification of works of Art. Now we can say that a mode of art is also dose to current stream of the times. A lot of artists have been trying to get out of traditional way of presentation techniques and classification of genres. In that point, the emergence of Multimedia Alt is inevitable in this digital era. The terms of Internet or multimedia are now familiar with everybody in the world, and a lot of works like Technology Art, Information Art, Computer Art, Digital Art, New Media Art, and so on have been coming into the world by using multimedia. Unlike other works of Art, these works from multimedia are practically used by being combined with technologies. Hereupon, in this paper I would like to find out a concept of Multimedia Art, its social function, and the future prospect of this brand-new form of art.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.4
• /
• pp.56-67
• /
• 2004

This study analyzes human error of workers performing simple repetitive tasks, and in order to prepare preventative measures, 486 people were used as subjects. The results of the study are like the following. First, the biggest cause of human error showed to be the worker himself in $77.8\%$ of the cases, machinery showed to be the cause in $16.3\%$ of the cases and management showed to be the cause in $6.0\%$ of the cases. The results show that most of the human error occurred due to the worker performing simple repetitive tasks and the human errors showed to be caused more by bad ergonomics and long hours rather than by problems with machinery. In addition, the area with the highest rate of human error showed to be the Human Information Processing System with Task Input Error being the highest with $46.9\%$, followed by Judgement and Memory Error with $36.4\%$ and Recognition Verification Error with $16.7\%$. Although fully automated tasks may reduce the rate of human error we must focus on lowering the rate of problems arising from spontaneous errors caused by workers performing simple repetitive tasks by continuously renewing plans and budgets in order to standardize tasks by incorporating cyclic positioning according to experience and positional exchange and by inspecting the workplace to increase efficiency of the workers.