• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.75-81
• /
• 2009

The industrial by-products market has increased at a geometric rate worldwide with the rapid economic growth. Among the wide variety of industrial by-products, fly ash which is generated by the combustion of coal is one of the more troublesome industrial wastes because they entail substantial disposal cost and also cause a shortage of disposal sites. In Korea alone, fly ash generation is expected to increase to 5.8 million tons by 2009, and to 6 million tons by 2010. Given the accelerated industrial development in developing countries, the amount of fly ash generation is predicted to reach enormous levels throughout the world. An increasing number of studies have currently focused on the feasibility of recycling industrial wastes i.e., fly ash in terms of environmental advantages. In this study, the optimized mix proportion of high performance shotcrete using fly ash was determined for the purpose of promoting recycling and reuse of resources.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2004.04b
• /
• pp.27.2-27.2
• /
• 2004

• 한국도로학회지:도로
• /
• v.10 no.3
• /
• pp.80-86
• /
• 2008

• 한국도로학회지:도로
• /
• v.10 no.3
• /
• pp.87-91
• /
• 2008

• Magazine of RCR
• /
• v.12 no.4
• /
• pp.34-39
• /
• 2017

• Cement
• /
• s.200
• /
• pp.36-39
• /
• 2013

포틀랜드 시멘트만이 유일하던 지난 1976년, 제설과정에서 발생하는 부산물인 슬래그(slag)를 재활용한 시멘트를 국내 최초로 생산한 한국C&T(주)는 1985년 무재해 3배 달성업체로 노동부 은탑산업상을 수상한 바 있으며 1986년 증권감독원으로부터 우량기업으로 선정되는 등 양질의 슬래그 시멘트 생산을 통해 연관산업 발전에 이바지해왔다. 신뢰에 기반을 둔 경영과 끊임없는 기술개발을 토대로 2014년 힘찬 도약을 준비해 나가고 있는 한국C&T(주) 김훈석 대표이사를 만났다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.71-78
• /
• 2011

Korean government has promoted nationwide Eco Industrial Park (EIP) project to recycle by-products and wastes in industrial park since 2010. However, the corresponding management is insufficient to support the project. Considering the efficiency and effectiveness, GIS-based management can be an alternative of the current status. This study has focused on the construction of recycling network based on EIP using GIS approach. Two industrial parks located in Gyeonggi province were selected as study sites. GIS-based spatial location analysis was performed to determine the optimal location of recycling company, and to identify linkage of one manufacture to the other manufacturers based on the types of waste. Also, the optimal network for recycling of waste heat was established. Finally, the feasibility of the current GIS-based recycling network was established by performing benefit-cost analysis.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.81-92
• /
• 2009

This study investigated the occurrence of residues derived animals produced during the process of slaughter and the subsequent channels of processing those residues derived animals; the status of recycling of these residues derived animals by recycling business is investigated to utilize the results as the basic data for management purposes. At present, animal slaughter is highly specialized and the residues derived animals obtained from the slaughter of animals are separated and dissected into different parts to serve as fodder and residual compost. Some of the residues derived animals obtained from slaughter, which are edible are utilized for edible purposes and those parts which are not edible such as horns, claws, fats etc. are confirmed to be recycled. Poultry residues derived animals are mostly recycled as single-component feed, used as original forms, residual compost whereas fish remains are recycled mostly as singlecomponent feed etc. Most of the companies that recycle residues derived animals are situated in provinces such as Jeollanamdo, Jeollabukdo, Gyeongsangnamdo, Gyeongsangbukdo, where many of the slaughterhouses are located. And many of these recylcing business find themselves in the vicinity of these slaughterhouse. Majority of these slaughterhouse are capable of processing residues derived animals in the range of 10~60 ton/day, which is quite small in terms of processing capacity. The problem encountered in the recycling of the residues derived animals is the occurrence of foul smell caused by the decomposition, for which appropriate measures have to be taken. The residues derived animals are on many occasions directly collected and transported to save costs and secure required amount of residues derived animals.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.441-448
• /
• 2020

In this study, the engineering characteristics of CLSM mixed with GBFS and GF were identified to review the applicability as a replacement material and further evaluate the recharge and field applicability as a joint filler material. This study has resulted in the following findings. First, Using more than 30% of GBFS to replace FA enabled bleeding control through improved fluidity. Moreover, it has been confirmed that effective strength and proper quality can be achieved when it was applied as a refiller and joint filler material with higher early strength than the base material. Second, When using more than 30% of FNS to replace sand, it was found that adding 0.3~0.35 of the AE agent is effective for bleeding control through improved fluidity. Third, When using more than 30% of both GBFS and FNS in combination, it was found that adding 0.3~0.35 of the AE agent is effective for bleeding control through improved fluidity. Also, it was confirmed that proper mixing of 15~60% of GF secured the effective strength and desired quality as a refiller and joint filler material. Fourth, The relationship between the superficial level and internal micro pores of CLSM from the curing process needs to be discussed and reviewed in more detail through further research studies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3C
• /
• pp.159-165
• /
• 2010

The problems such as natural resource exhaustion, pollutant emission and waste generation are increasing worldwide with the industrial development. The quantity of the industrial by-product in Korea is 6 million tons a year, and even its basic treatment processes including landfill, incineration and storage have reached their limits. In this study, fly ash and silica fume were applied to shotcrete to develop a method for the reuse of resources and to increase the use of fly ash, which is an industrial waste. An environmental hazard evaluation is a must to actively address the worldwide environmental problems, though. Therefore, an environmental impact assessment was conducted using the chemical content analysis test and heavy metal exudation test, for ten mixtures that were obtained through the pre-mixing and compressive strength tests. The results of the compressive strength test showed that all mixtures satisfied national and international standards. Cr, Cd and Hg were not detected, and Pb was detected only in some cases with fly ash. Cu and As were detected in all mixtures, but all of them satisfied national and international standards.